10KL Per Hour Reverse Osmosis RO Water Plant With RO Membrane

Product Specification

10KL Per Hour Reverse Osmosis RO Water Plant With RO Membrane ​

Brief introduction and Technical Specification

Water RO Plant is a system used to produce pure water for daily life and industrial production process.

Typical Process:

Raw water →raw water pump→ sand filter→ carbon filter→ softener filter→cartridge/security filter→high-pressure pump→ reverse osmosis

part→ pure water tank

(PS: ozone generator or uv sterilizer can be chosen as disinfection system.)

Design basis and treated water standard

Raw water : Raw water quality analysis report( Better provide this to manufacture)

Raw water: Underground water

Produced water's application: Manufacture agrochemical

The capacity of produced water : 100L/H - 50000L/H

System Configuration : Pre-treatment + One Stage RO Water Purification System +Post Treatment

Designed Recovery : 65%

Rejection rate : ≥ 97%

Operation time up to 12hours per day and 350days per year

Installation condition:Interior systems installation;Temperature:5-45℃

Voltage : 220V/380v,50Hz/60HZ;

Effluent standards: Feed water conductivity ≤500μs/cm, water conductivity ≤10μs/cm (desalting rate is 98-99.8%).

This system is designed as regards to customer raw water test report and application.

Pumps:

CHUNKE is using CNP/Grundfos/Danfoss pump for high pressure pumps and raw water pump. We are using SEKO

pump for chemical dosing. As regards to customer budget, customer can choose one brand from them.

Sand Filter Tank:

We are giving three option to you for sand filter tank; FRP, Stainless Steel S304 and Stainless Steel 316. For food and pharmaceutical industry we suggest SS316, of course the raw water source is also is important to choose tank material. To choose correct tank, we have to check every data of your application and then suggest to you most appropriate solution.

CHUNKE has all kind of sand media at its stock. Commonly customers are using 1-2mm,2-4mm, 4-8mm,8-16mm size Quartz Sand.

If you want to use FRP tank, the tank size is Ф1500 x 24000mm, our code for this tank is CK-6096. Flow rate is 40-60 m3/h and you can put 3750kg sand inside.

If you want to use Stainless Steel 304 or 316 tank the tank size is Ф1500 x 2400mm, our code for this tank is

CK1-6096. Flow rate is 40-60 m3/h and you can put 3750kg sand inside.But we do not suggest use SS tank, FRP

is better for Brackish Water.

Carbon Filter Tank:

Carbon filter is same with sand filter,tank material will be decided by you and our engineering team as FRP orstainless Steel 304 or 316. But we do not suggest use SS tank, FRP is better for Brackish Water.

If you want to use FRP tank, the tank size is Ф1500 x 2400mm, our code for this tank is CK-60.96 Flow rate is 40-60m3/h and you can put 1250kg activated carbon inside.

If you want to use Stainless Steel 304 or 316 tank the tank size is Ф1500x 2400mm, our code for this tank is CK1-6096. Flow rate is 40-60 m3/h and you can put 1250kg activated carbon inside.

Water Softener (Resin) Tank:

If you raw water has hardness, you can choose CHUNKE water softener tank in your system, size is same with sand and carbon filter. You can choose material as FRP or Stainless Steel. You can put 2500L resin in CK-6096 type FRP tank.

Cartridge Filter Housing & Cartridge:

All our Reverse Osmosis Water Treatment Machine has cartridge filter housing before membrane, membranes are most important and expensive parts of system. Therefore we have to protect them, cartridge filter housing material is SS304 or SS316. We mostly using 5micron or 1 micron PP cartridge. For 15000LPH 40" 15 pieces cartridges are enough.

Our Stainless Steel Cartridge Housing code is CK40-15core×40", its diameter is 230mm, it has 15 core (you can put 15 cartridges), cartridge height is 40" and all universal cartridge is suitable to use in our housing.

We suggest you to change cartridges in every month.

Membrane Housing:

At CHUNKE we are using stainless steel or FRP (ceramic) type membrane housing. It is depend on design and application.For 15000LPH machine, we have to use 8040 type membrane so as regards to membrane size , we offer you FRP type 8040 size housing. Membrane housing type is 8040 and 4 pcs.

Membrane:

The most important part of RO Water Treatment Machine is membrane, in market there are a lot of membrane available.

As regards to customer application and budget, our team offer from Vontron/GE/DOW/TORAY brands. Our company do not use no name membranes or low quality membranes.

For 15000LPH , you can choose one brand from below;type of the membrane is 8040 (16 pcs).

Toray
GE
DOW
Vontron

Electronic Parts:

PC programmable automatic control is Mitsubishi,if you want PLC touch screen panel, we use driver Siemens or Danfoss.

All electronic parts are France Schneider contactors, thermal relays, knobs, switches, lights, Korean pressure controller, time controller.

RO water Plant Detail picture: