SRP1513CA-100M 10 UH Shielded Inductor 25 A 7mOhm Max Nonstandard RF Inductors

Product Specification

Features
The Unidirectional SD series is designed for use in electronic
equipment for low speed and DC applications. It will protect any
sensitive equipment from damage due to electrostatic discharge
(ESD) and other transient events.
The SD series can safely absorb repetitive ESD strikes at +30kV
(contact discharge, IEC 61000-4-2) without performance
degradation and safely dissipate 30A (SD05) of 8/20μs induced
surge current (IEC61000-4-5 2nd edition) with very low
clamping voltages.

General Specifications

Operating Temperature................................-55 °C to +155 °C (Temperature rise included)

Storage Temperature (Component)................................-55 °C to +155 °C

Rated Current............ Inductance drops 30 % at Isat

Temperature Rise................... 20 or 40 °C at rated Irms1

Rated Voltage ...........................40 V Typ.

Moisture Sensitivity Level.....................1ESD

Classification (HBM).................N/A1

Circuit design, component, PCB tracesize and thickness, airflow and othercooling provisions

all affect the parttemperature. Part temperature should beverified in the end application.

The SRP1513CA-100M is a shielded inductor with an inductance value of 10 μH.

Here are some specifications for this inductor:

• Inductance Value: 10 μH. This represents the amount of inductance the inductor possesses,
• which measures its response to changes in current.
• Shielding: The SRP1513CA-100M is designed with shielding to reduce the impact of external
• interference on the inductor.
• Maximum Current: 25 A. This indicates the maximum current that the inductor can handle
• without exceeding its specified limits.
• Maximum DC Resistance: 7 mΩ. This is the maximum resistance of the inductor when
• a direct current (DC) is applied, and it affects the power dissipation and efficiency of the inductor.
• Nonstandard RF Inductors: The SRP1513CA-100M falls under the category of nonstandard RF
• (Radio Frequency) inductors, which suggests that it may have unique specifications or characteristics
• tailored for RF applications.

These specifications provide a general overview of the SRP1513CA-100M shielded inductor. For

detailed electrical characteristics, application considerations, and other specific information, it is

advisable to consult the datasheet or contact the manufacturer directly.

• Package Type: The SRP1513CA-100M typically comes in a compact surface-mount package, allowing for

• easy integration onto circuit boards.

• Operating Temperature Range: The inductor is designed to operate within a specific temperature range.

• The specific range should be stated in the datasheet provided by the manufacturer.

• Saturation Current: The saturation current represents the maximum current level at which the inductance

• starts to significantly decrease. The datasheet should provide the saturation current value for the

• SRP1513CA-100M inductor.

• Self-Resonant Frequency: Inductors have a self-resonant frequency, which is the frequency at which the

• inductive and capacitive properties of the component interact. The datasheet should specify the self-resonant

• frequency for the SRP1513CA-100M inductor.

• Applications: Shielded inductors like the SRP1513CA-100M are commonly used in various electronic

• applications, including power supplies, DC-DC converters, filtering circuits, and RF circuits.

• The datasheet or application notes may provide more specific guidance on the recommended applications for this inductor.