Lenolink Telecommunication Co.,Ltd
| Supply Ability | 1000pcs/month |
| Packaging Details | Packing with bracket 1 PC /box |
| output power | 20dBm |
| gain | 80dB |
| color | black |
| frequency | 900MHz, 2100MHz |
| Coverage | 1000sqm |
| Noise figure | 2.0 |
| Brand Name | Lenolink |
| Model Number | LSR10-lte |
| Certification | ISO |
| Place of Origin | China |
View Detail Information
Explore similar products
1.8V Standing Wave Ratio Mobile Signal Repeater / Band Selective Repeater 20 DBM
900MHz Pico Gsm Signal Repeater 50dB Gain Metal Housing With AGC Function
Indoor Channel Selective Repeater Blue Metal Cover Quad Band Antenna With 20 DBM
10dBm Pico Wcdma Mobile Signal Repeater 60dB Gain Metal Housing 500sqm Coverage
Product Specification
| Supply Ability | 1000pcs/month | Packaging Details | Packing with bracket 1 PC /box |
| output power | 20dBm | gain | 80dB |
| color | black | frequency | 900MHz, 2100MHz |
| Coverage | 1000sqm | Noise figure | 2.0 |
| Brand Name | Lenolink | Model Number | LSR10-lte |
| Certification | ISO | Place of Origin | China |
| High Light | mobile signal booster ，wide band repeater | ||
20dBm dual system signal booster 70dB Gain ALC MGC 1000sqm Coverage
Description:
Consumer booster is to support any mobile systems to help end users to improve mobile signals for better signal coverage. It is designed to support coverage area up to 100~5000 square meters with proper engineering.
Lenolink provides a series of products to support different application and customize your requirement. And the products can support single, dual and triple systems with one housing.
Design Advantage:
1. The consumer booster is an ideal solution for providing a cost effective improvement in cellular in-building coverage of a home, office, basement or building, in the quickest time possible.
2. Manual gain control (MGC) available for both uplink and downlink to adjust the gain.
3. To maintain safe and specific output signal levels and give alarms on self-oscillation, the repeater has built-in ALC circuits, which can automatically control the gain of the repeater depending upon the strength of input signals.
4. Auto shut off function available for both uplink and downlink to avoid deep self-oscillations from jamming the towers, saving your trouble from operators.
5. Wide band feature enables all devices operating within the wide frequency range of the repeater to see an improvement in performance.
6. Low power consumption with elegant and compact design.
7. Support single, dual, triple and quad systems.
Specification:
| Electrical specification | Uplink | Downlink | |||
| Frequency Range | CDMA800 | 824 ~ 849 MHz | 869 ~ 894 MHz | ||
| CDMA1900 | 1850 ~ 1910 MHz | 1930 ~ 1990 MHz | |||
| GSM900 | 880 ~ 915 MHz | 925 ~ 960 MHz | |||
| DCS | 1710 ~ 1785 MHz | 1805 ~ 1880 MHz | |||
| PCS | 1850 ~ 1910 MHz | 1930 ~ 1990 MHz | |||
| WCDMA | 1920 ~ 1980 MHz | 2110 ~ 2170 MHz | |||
| AWS | 1710 ~ 1755 MHz | 2110 ~ 2155 MHz | |||
| LTE | 2500 ~ 2570 MHz | 2620 ~ 2690 MHz | |||
| Max .Gain | ≥ 55dB | ≥ 60dB | |||
| ≥ 65dB | ≥ 65dB | ||||
| ≥ 65dB | ≥ 70dB | ||||
| Max .Output Power | ≥ 10dBm | ≥ 10dBm | |||
| ≥ 12dBm | ≥ 15dBm | ||||
| ≥ 15dBm | ≥ 20dBm | ||||
| Band width (-3dB) | Wide Band | ||||
| MGC | ≥ 31dB / 1dB step | ||||
| ALC | ≥ 15dB, auto shut off after 15dB | ||||
| Gain Flatness | GSM&CDMA | Tpy≦ 6dB(P- P); DCS,PCS≦ 8dB(P-P) | |||
| WCDMA | ≦ 2dB/ 3. 84MHz,Ful l Band≦ 5dB(P-P) | ||||
| Noise Figure | ≤6dB | ||||
| VSWR | ≤1.8 | ||||
| Group Delay | ≤0.5μs | ||||
| Frequency Stability | ≦ 0.01ppm | ||||
| Spurious Emission & | GSM Meet ETSI TS 151 026 | ||||
| WCDMA Meet 3GPP TS 25.143 | |||||
| CDMA Meet IS95 & CDMA2000 | |||||
| WCDMA System | Spurious Emission Mask | Meet 3GPP TS 25. 143 | |||
| Modulation Accuracy | ≦ 12.5% | ||||
| PCDE | ≦ -35dB@Spreading Factor 256 | ||||
| CDMA System | Rho | ρ> 0.980 | |||
| ACPR | Meet I S95 & CDMA2000 | ||||
| LED Alarm | Standard | ||||
| Power LED | Green light when power on. | ||||
| ALC LED | Orange @ ALC 1~5dB, Red @ ALC 15dB~20dB, LED off after 5 seconds red color | ||||
| Mechanical Specifications | Standard | ||||
| I /O Port | N-Female | ||||
| Impedance | 50 ohm | ||||
| Operating Temperature | -25ºC~+55ºC | ||||
| Environment Conditions | IP40 | ||||
| Power Supply | Input AC90~264V | ||||
Company Profile
Our company established in 2014, which is a new-high-tech enterprise which focus on microwave technology research,RF,microwave component and system industry development.We are located in ShenZhen, covering total 7300m2 and possess 300 advanced microwave detection devices and precision machining equipment. The capacity of production one year here is around USD200 million.
Our products contains 16 series and 1000 designs with their own property right and authority approval. The products are Power Splitter, Directional Coupler, RF Attenuator Dummy Load, Cable Assembly, Connector, Filter, Duplexer and Combiner. Customers' designs (OEM / ODM) are also available.
Company Details
Business Type:
Manufacturer
Year Established:
2014
Total Annual:
3000000-5000000
Employee Number:
150~200
Ecer Certification：
Active Member
Established in 2014, Lenolink telecom is professional mobile solution provider for indoor and outdoor coverage to cellular operators and end users. We are located in Shenzhen China where is telecommunication industrial center of China. Lenolink has a solid force of R&D team, over 25% of our empl... Established in 2014, Lenolink telecom is professional mobile solution provider for indoor and outdoor coverage to cellular operators and end users. We are located in Shenzhen China where is telecommunication industrial center of China. Lenolink has a solid force of R&D team, over 25% of our empl...
Get in touch with us
Leave a Message, we will call you back quickly!