Lenolink Telecommunication Co.,Ltd
| Supply Ability | 1000pcs/month |
| Packaging Details | Packing with bracket 1 PC /box |
| output power | 20dBm |
| gain | 70dB |
| coverage | 1000sqm |
| frequency | gsm900, lte1800, lte2600 |
| Power supply | AC110~240V DC 5-12V |
| Connector | N-Female Connector |
| Brand Name | Lenolink |
| Model Number | LSP20-DB |
| Certification | ISO |
| Place of Origin | China |
View Detail Information
Explore similar products
1.8V Standing Wave Ratio Mobile Signal Repeater / Band Selective Repeater 20 DBM
900MHz Pico Gsm Signal Repeater 50dB Gain Metal Housing With AGC Function
Indoor Channel Selective Repeater Blue Metal Cover Quad Band Antenna With 20 DBM
10dBm Pico Wcdma Mobile Signal Repeater 60dB Gain Metal Housing 500sqm Coverage
Product Specification
| Supply Ability | 1000pcs/month | Packaging Details | Packing with bracket 1 PC /box |
| output power | 20dBm | gain | 70dB |
| coverage | 1000sqm | frequency | gsm900, lte1800, lte2600 |
| Power supply | AC110~240V DC 5-12V | Connector | N-Female Connector |
| Brand Name | Lenolink | Model Number | LSP20-DB |
| Certification | ISO | Place of Origin | China |
| High Light | mobile signal booster ，wide band repeater | ||
Dual Band Mobile Signal Booster 20 dBm Coverage 2000sqm 70dB Gain
Description
Consumer booster is to support any mobile systems to help end users to improve mobile signals for better signal coverage. It is designed to support coverage area up to 100~5000 square meters with proper engineering.
Lenolink provides a series of products to support different application and customize your requirement. And the products can support single, dual and triple systems with one housing.
The power level varies from 10dBm to 27dBm which can satisfy the coverage area from 100 to 5000 sqm. Lenolink boosters are widely used in parking lots, hotel, VIP room, basement and private house.
Specification:
| Electrical specification | Uplink | Downlink | |||
| Frequency Range | CDMA800 | 824 ~ 849 MHz | 869 ~ 894 MHz | ||
| CDMA1900 | 1850 ~ 1910 MHz | 1930 ~ 1990 MHz | |||
| GSM900 | 880 ~ 915 MHz | 925 ~ 960 MHz | |||
| DCS | 1710 ~ 1785 MHz | 1805 ~ 1880 MHz | |||
| PCS | 1850 ~ 1910 MHz | 1930 ~ 1990 MHz | |||
| WCDMA | 1920 ~ 1980 MHz | 2110 ~ 2170 MHz | |||
| AWS | 1710 ~ 1755 MHz | 2110 ~ 2155 MHz | |||
| LTE | 2500 ~ 2570 MHz | 2620 ~ 2690 MHz | |||
| Max .Gain | ≥ 55dB | ≥ 60dB | |||
| ≥ 65dB | ≥ 65dB | ||||
| ≥ 65dB | ≥ 70dB | ||||
| ≥ 70dB | ≥ 75dB | ||||
| Max .Output Power | ≥ 10dBm | ≥ 10dBm | |||
| ≥ 12dBm | ≥ 15dBm | ||||
| ≥ 15dBm | ≥ 20dBm | ||||
| ≥ 15dBm | ≥ 23dBm | ||||
| Band width (-3dB) | Wide Band | ||||
| MGC | ≥ 31dB / 1dB step | ||||
| ALC | ≥ 15dB, auto shut off after 15dB | ||||
| Gain Flatness | GSM&CDMA | Tpy≦ 6dB(P- P); DCS,PCS≦ 8dB(P-P) | |||
| WCDMA | ≦ 2dB/ 3. 84MHz,Ful l Band≦ 5dB(P-P) | ||||
| Noise Figure | ≤6dB | ||||
| VSWR | ≤1.8 | ||||
| Group Delay | ≤0.5μs | ||||
| Frequency Stability | ≦ 0.01ppm | ||||
| Spurious Emission & Output inter-modulation | GSM Meet ETSI TS 151 026 | ||||
| WCDMA Meet 3GPP TS 25.143 | |||||
| CDMA Meet IS95 & CDMA2000 | |||||
| WCDMA System | Spurious Emission Mask | Meet 3GPP TS 25. 143 | |||
| Modulation Accuracy | ≦ 12.5% | ||||
| PCDE | ≦ -35dB@Spreading Factor 256 | ||||
| CDMA System | Rho | ρ> 0.980 | |||
| ACPR | Meet I S95 & CDMA2000 | ||||
| LED Alarm | Standard | ||||
| Mechanical Specifications | Standard | ||||
| I /O Port | N-Female | ||||
| Impedance | 50 ohm | ||||
| Operating Temperature | -25ºC~+55ºC | ||||
| Environment Conditions | IP40 | ||||
| Power Supply | Input AC90~264V | ||||
Design Advantage
1. Support wide band to cover all operators.
2. Manual gain control (MGC) available for both uplink and down link to adjust the gain value for proper coverage during installation or maintenance.
3. To maintain safe and specific output signal levels and give alarms on self-oscillation, the repeater has built-in AGC and ALC circuits, which can automatically control the gain of the repeater depending upon the strength of input signals.
4. Optional auto shut off design available for both uplink and downlink to avoid serious interference to network effectively when the repeater is in deep self-oscillation or very strong input power.
5. Very low power consumption.
6. Support single, dual, triple and quad systems with one housing.
Our factory:
Company Details
Business Type:
Manufacturer
Year Established:
2014
Total Annual:
3000000-5000000
Employee Number:
150~200
Ecer Certification：
Active Member
Established in 2014, Lenolink telecom is professional mobile solution provider for indoor and outdoor coverage to cellular operators and end users. We are located in Shenzhen China where is telecommunication industrial center of China. Lenolink has a solid force of R&D team, over 25% of our empl... Established in 2014, Lenolink telecom is professional mobile solution provider for indoor and outdoor coverage to cellular operators and end users. We are located in Shenzhen China where is telecommunication industrial center of China. Lenolink has a solid force of R&D team, over 25% of our empl...
Get in touch with us
Leave a Message, we will call you back quickly!