Lenolink Telecommunication Co.,Ltd
| Supply Ability | 1000pcs/month |
| Packaging Details | Packing with bracket 1 PC /box |
| output power | 20dBm |
| gain | 60dB |
| coverage | 200sqm |
| frequency | GSM900, DCS1800, WCDMA2100 |
| Key words | mobile phone signal booster |
| Brand Name | Lenolink |
| Model Number | LSR20-lte |
| Certification | ISO |
| Place of Origin | China |
View Detail Information
Explore similar products
1.8V Standing Wave Ratio Mobile Signal Repeater / Band Selective Repeater 20 DBM
900MHz Pico Gsm Signal Repeater 50dB Gain Metal Housing With AGC Function
Indoor Channel Selective Repeater Blue Metal Cover Quad Band Antenna With 20 DBM
10dBm Pico Wcdma Mobile Signal Repeater 60dB Gain Metal Housing 500sqm Coverage
Product Specification
| Supply Ability | 1000pcs/month | Packaging Details | Packing with bracket 1 PC /box |
| output power | 20dBm | gain | 60dB |
| coverage | 200sqm | frequency | GSM900, DCS1800, WCDMA2100 |
| Key words | mobile phone signal booster | Brand Name | Lenolink |
| Model Number | LSR20-lte | Certification | ISO |
| Place of Origin | China | ||
| High Light | mobile signal booster ，wide band repeater | ||
20 dBm Triple Wide Band Signal booster cover 60dB gain 1000sqm
Description
Lenolink provides a series of products to support different applications and customized your requirement. The output power level is 10dBm, 20dBm, 25dBm, 30dBm and 43dBm. Triple band repeater can support GSM900, DCS1800 and WCDMA2100 in one housing, so that can amplify tree systems at the same time.
A mobile phone signal repeater provides the ultimate solution in any indoor area where cellular communications can not work well due to leak of signals (but outdoor signal good). The repeater device features easy installation & operation, build-in indoor antenna and no interference. It could also improve indoor electromagnetism environments, protract cellular battery life and reduce radiation of cellphones.
Design Advantage
1. Support wide band to cover all operators.
2. Manual gain control (MGC) available for both uplink and down link to adjust the gain value for proper coverage during installation or maintenance.
3. To maintain safe and specific output signal levels and give alarms on self-oscillation, the repeater has built-in AGC and ALC circuits, which can automatically control the gain of the repeater depending upon the strength of input signals.
4. Optional auto shut off design available for both uplink and downlink to avoid serious interference to network effectively when the repeater is in deep self-oscillation or very strong input power.
5. Very low power consumption.
6. Support single, dual, triple and quad systems with one housing.
7. Metal housing, professional design.
Specification:
| Electrical specification | Uplink | Downlink | |||
| Frequency Range | GSM | 880 ~ 915 MHz | 925 ~ 960 MHz | ||
| DCS | 1710 ~ 1785 MHz | 1805 ~ 1880 MHz | |||
| WCDMA | 1920 ~ 1980 MHz | 2110 ~ 2170 MHz | |||
| Max .Gain | ≥ 55dB | ≥ 60dB | |||
| ≥ 65dB | ≥ 65dB | ||||
| ≥ 65dB | ≥ 70dB | ||||
| ≥ 70dB | ≥ 75dB | ||||
| ≥ 75dB | ≥ 75dB | ||||
| ≥ 75dB | ≥ 80dB | ||||
| Max .Output Power | ≥ 10dBm | ≥ 10dBm | |||
| ≥ 12dBm | ≥ 15dBm | ||||
| ≥ 15dBm | ≥ 20dBm | ||||
| ≥ 15dBm | ≥ 23dBm | ||||
| ≥ 20dBm | ≥ 27dBm | ||||
| ≥ 20dBm | ≥ 30dBm | ||||
| Band width (-3dB) | Wide Band | ||||
| MGC | ≥ 31dB / 1dB step | ||||
| ALC | ≥ 15dB, auto shut off after 15dB | ||||
| Gain Flatness | GSM&CDMA | Tpy≦ 6dB(P- P); DCS,PCS≦ 8dB(P-P) | |||
| WCDMA | ≦ 2dB/ 3. 84MHz,Ful l Band≦ 5dB(P-P) | ||||
| Noise Figure | ≤6dB | ||||
| VSWR | ≤1.8 | ||||
| Group Delay | ≤0.5μs | ||||
| Frequency Stability | ≦ 0.01ppm | ||||
| Spurious Emission & | GSM Meet ETSI TS 151 026 | ||||
| WCDMA Meet 3GPP TS 25.143 | |||||
| CDMA Meet IS95 & CDMA2000 | |||||
| WCDMA System | Spurious Emission Mask | Meet 3GPP TS 25. 143 | |||
| Modulation Accuracy | ≦ 12.5% | ||||
| PCDE | ≦ -35dB@Spreading Factor 256 | ||||
| CDMA System | Rho | ρ> 0.980 | |||
| ACPR | Meet I S95 & CDMA2000 | ||||
| LED Alarm | Standard | ||||
| Power LED | Green light when power on. | ||||
| ALC LED | Orange @ ALC 1~5dB, Red @ ALC 15dB~20dB, LED off after 5 seconds red color | ||||
| Mechanical Specifications | Standard | ||||
| I /O Port | N-Female | ||||
| Impedance | 50 ohm | ||||
| Operating Temperature | -25ºC~+55ºC | ||||
| Environment Conditions | IP40 | ||||
| Dimensions | ≤20dBm | 250x125x52mm; | |||
| >20dBm | 250x220x52mm | ||||
| Weight | ≤20dBm | ≤ 2.0Kg; | |||
| >20dBm | ≤ 3.2Kg; | ||||
| Power Supply | Input AC90~264V | ||||
Our factory:
Company Details
Business Type:
Manufacturer
Year Established:
2014
Total Annual:
3000000-5000000
Employee Number:
150~200
Ecer Certification：
Active Member
Established in 2014, Lenolink telecom is professional mobile solution provider for indoor and outdoor coverage to cellular operators and end users. We are located in Shenzhen China where is telecommunication industrial center of China. Lenolink has a solid force of R&D team, over 25% of our empl... Established in 2014, Lenolink telecom is professional mobile solution provider for indoor and outdoor coverage to cellular operators and end users. We are located in Shenzhen China where is telecommunication industrial center of China. Lenolink has a solid force of R&D team, over 25% of our empl...
Get in touch with us
Leave a Message, we will call you back quickly!