Bicheng Electronics Technology Co., Ltd
| Payment Terms | T/T |
| Supply Ability | 5000PCS per month |
| Delivery Time | 8-9 working days |
| Packaging Details | Vacuum bags+Cartons |
| Base material | FR-4 |
| Layer count | 4 Layers |
| PCB thickness | 1.6mm ±0.16 |
| PCB size | 119 x 80mm=1PCS |
| Solder mask | Green |
| Silkscreen | White |
| Copper weight | 1oz |
| Surface finish | Immersion gold |
| Brand Name | Bicheng |
| Model Number | BIC-452.V1.0 |
| Certification | UL, ISO9001, IATF16949 |
| Place of Origin | CHINA |
View Detail Information
Explore similar products
RO4003C and RO4450F high frequency Radar Altimeter HDI PCB Board 1.94mm 6 Layer
1-32 Layers ISO9001 HDI PCB Board With LPI Solder Mask
Multi Layer HDI PCB Board IATF16949 buried via PCB
10 Layer RO4450F 2mm RF PCB Board For Broadband Wireless Solutions
Product Specification
| Payment Terms | T/T | Supply Ability | 5000PCS per month |
| Delivery Time | 8-9 working days | Packaging Details | Vacuum bags+Cartons |
| Base material | FR-4 | Layer count | 4 Layers |
| PCB thickness | 1.6mm ±0.16 | PCB size | 119 x 80mm=1PCS |
| Solder mask | Green | Silkscreen | White |
| Copper weight | 1oz | Surface finish | Immersion gold |
| Brand Name | Bicheng | Model Number | BIC-452.V1.0 |
| Certification | UL, ISO9001, IATF16949 | Place of Origin | CHINA |
| High Light | Blind Via HDI PCB Board ，Fr4 Tg150 HDI PCB Board ，Fr4 Tg150 Blind Via PCB | ||
Blind Via PCB Built on Tg150℃ FR-4 With Immersion Gold 4-Layer FR-4 Circuit Board
(Printed circuits boards are custom-made products, the picture and parameters shown are just for reference)
1.1 General description
This is a type of multilayer PCB built on FR-4 substrate with Tg 150°C for the application of mobile phone with blind via technology. It's 1.6 mm thick with white silkscreen(Taiyo) on green solder mask (Taiyo) and immersion gold on pads. The base material is from ITEQ supplying single up PCB. They're fabricated per IPC 6012 Class 2 using supplied Gerber data. Each 25 boards are packed for shipment.
1.2 Features and Benefits
1.2.1 Middle Tg FR-4 Shows low Z-CTE and excellent through hole reliability;
1.2.2 Immersion gold has high solderability, no stressing and less contamination;
1.2.3 Multilayer shortened connection between electronic components;
1.2.4 16000㎡ workshop and 8000 types of PCB's per month;
1.2.5 Delivery on time: >98%
1.2.6 No minimum order quantity. 1 piece is available;
1.3 Applications
GPS Tracking Syste
Embedded Systems
Data Acquisition System
Microcontrollers
1.4 Parameter and data sheet
| PCB SIZE | 119 x 80mm=1PCS |
| BOARD TYPE | Multilayer PCB |
| Number of Layers | 4 layers |
| Surface Mount Components | YES |
| Through Hole Components | YES |
| LAYER STACKUP | copper ------- 18um(0.5oz)+plate TOP layer |
| Core FR-4 0.61mm | |
| copper ------- 35um(1oz) MidLayer 1 | |
| Prepreg 0.254mm | |
| copper ------- 35um(1oz) MidLayer 2 | |
| Core FR-4 0.61mm | |
| copper ------- 18um(0.5oz)+plate BOT layer | |
| TECHNOLOGY | |
| Minimum Trace and Space: | 4 mil / 4 mil |
| Minimum / Maximum Holes: | 0.3 mm /3.5 mm |
| Number of Different Holes: | 9 |
| Number of Drill Holes: | 415 |
| Number of Milled Slots: | 0 |
| Number of Internal Cutouts: | 0 |
| Impedance Control: | no |
| Number of Gold finger: | 0 |
| BOARD MATERIAL | |
| Glass Epoxy: | FR-4 Tg150℃, er<5.4.IT-158, ITEQ |
| Final foil external: | 1oz |
| Final foil internal: | 1oz |
| Final height of PCB: | 1.6mm ±0.16 |
| PLATING AND COATING | |
| Surface Finish | Immersion Gold |
| Solder Mask Apply To: | TOP and Bottom, 12micron Minimum |
| Solder Mask Color: | Green, PSR-2000 GT600D, Taiyo Supplied. |
| Solder Mask Type: | LPSM |
| CONTOUR/CUTTING | Routing, stamp holes. |
| MARKING | |
| Side of Component Legend | TOP and Bottom. |
| Colour of Component Legend | White, S-380W, Taiyo Supplied. |
| Manufacturer Name or Logo: | Marked on the board in a conductor and leged FREE AREA |
| VIA | Plated through hole(PTH), minimum size 0.3mm. Blind Via Top to Inner layer 1, Bottom to Inner layer 2 |
| FLAMIBILITY RATING | UL 94-V0 Approval MIN. |
| DIMENSION TOLERANCE | |
| Outline dimension: | 0.0059" |
| Board plating: | 0.0029" |
| Drill tolerance: | 0.002" |
| TEST | 100% Electrical Test prior shipment |
| TYPE OF ARTWORK TO BE SUPPLIED | email file, Gerber RS-274-X, PCBDOC etc |
| SERVICE AREA | Worldwide, Globally. |
1.5 Composition of Holes
The blind hole is located on the top and bottom surface of the printed circuit board and has a certain depth for the connection between the surface line and the inner line below. The depth of the hole usually does not exceed a certain ratio (aperture). Buried hole is a connecting hole located in the inner layer of the printed circuit board, which does not extend to the surface of the circuit board.
The above two kinds of holes are located in the inner layer of the circuit board. The formation of through hole process is used before lamination, and several inner layers may be overlapped done during the formation of the through hole.
The third is called a through hole, which passes through the entire circuit board. It can be used to interconnect internally or as an installation location hole for components. Because the through hole is easier to realize and the cost is low, it is used in most printed circuit boards instead of the other two. The following mentioned holes, without special instructions, are considered as through holes.
From the design point of view, a hole is mainly composed of two parts, one is the middle hole (drill hole), the other is the pad area around the hole, see below. The size of these two parts determines the size of the hole. Clearly, in
high-speed, high-density PCB design, designers always want the holes the smaller the better, so that it can leave more wiring space on the board.
1.6 PCB capability 2022
| Parameter | Value |
| Layer Counts | 1-32 |
| Substrate Material | RO4350B, RO4003C, RO4730G3, RO4360G2, RO4533, RO3003, RO3006, RO3010, RO3035, RO3203, RO3210; RT/Duriod 5880; RT/Duriod 5870, RT/Duriod 6002, RT/Duroid 6010, RT/duroid 6035HTC; TMM4, TMM10, Kappa 438; TLF-35; RF-35TC, RF-60A, RF-60TC, RF-35A2, RF-45, RF-10, TRF-45; TLX-0, TLX-6, TLX-7, TLX-8; TLX-9, TLY-3, TLY-5; PTFE F4B (DK2.2 DK2.65 DK2.85 DK2.94, DK3.0, DK3.2, DK3.38, DK3.5, DK4.0, DK4.4, DK6.15, DK10.2); AD450, AD600, AD1000, TC350; Nelco N4000, N9350, N9240; FR-4 ( High Tg S1000-2M, TU-872 SLK, TU-768, IT-180A etc.), FR-4 High CTI>600V; Polyimide, PET; Metal Core etc. |
| Maximum Size | Flying test: 900*600mm, Fixture test 460*380mm, No test 1100*600mm |
| Board Outline Tolerance | ±0.0059" (0.15mm) |
| PCB Thickness | 0.0157" - 0.3937" (0.40mm--10.00mm) |
| Thickness Tolerance(T≥0.8mm) | ±8% |
| Thickness Tolerance(t＜0.8mm) | ±10% |
| Insulation Layer Thickness | 0.00295" - 0.1969" (0.075mm--5.00mm) |
| Minimum Track | 0.003" (0.075mm) |
| Minimum Space | 0.003" (0.075mm) |
| Outer Copper Thickness | 35µm--420µm (1oz-12oz) |
| Inner Copper Thickness | 17µm--350µm (0.5oz - 10oz) |
| Drill Hole(Mechanical) | 0.0059" - 0.25" (0.15mm--6.35mm) |
| Finished Hole(Mechanical) | 0.0039"-0.248" (0.10mm--6.30mm) |
| DiameterTolerance(Mechanical) | 0.00295" (0.075mm) |
| Registration (Mechanical) | 0.00197" (0.05mm) |
| Aspect Ratio | 12:1 |
| Solder Mask Type | LPI |
| Min Soldermask Bridge | 0.00315" (0.08mm) |
| Min Soldermask Clearance | 0.00197" (0.05mm) |
| Plug via Diameter | 0.0098" - 0.0236" (0.25mm--0.60mm) |
| Impedance Control Tolerance | ±10% |
| Surface Finish | HASL,HASL LF,ENIG,Imm Tin,Imm Ag, OSP, Gold Finger |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Exporter,Seller
Year Established:
2003
Total Annual:
10 million-18 million
Employee Number:
350~450
Ecer Certification：
Verified Supplier
Company Profile Founded in 2003, Shenzhen Bicheng Electronics Technology Co., Ltd is an established high frequency PCB supplier and exporter in Shenzhen China, severing cellular base station antenna, satellite, high frequency passive components, microstrip line and band line circuit, millime... Company Profile Founded in 2003, Shenzhen Bicheng Electronics Technology Co., Ltd is an established high frequency PCB supplier and exporter in Shenzhen China, severing cellular base station antenna, satellite, high frequency passive components, microstrip line and band line circuit, millime...
Get in touch with us
Leave a Message, we will call you back quickly!