A3 620W 50Hz Automatic Printing Machine for paper

Product Specification

FGK-330 A3 Office Quick Plastic Packing Hot Laminator/ Cold Pouch Laminator 

Automatic Electric Office Hot / Cold Photo Paper Pouch Machine A3 Size

FGK-300, this laminating machine is used to seal the identity card used by the identity card, employee card, marriage certificate, photo, business card, picture album, etc., easy to operate. Laminated materials can resist moisture. The water will get weaker. Easy to keep for a long time.

• Quick warm-up
• Smooth effect
• Adjustable temperature
• Automatic entry
• Low noise
• Humanization design

Features (Type: FGK-330) :

(1) Adopting infrared heating, preheating only takes 3 minutes.
(2) Double functions of oversizing and cold mounting to meet customers' different requirements for product sealing system.
(3) High quality high torque, noiseless motor, stable operation, longer service life.
(4) Durable, multiple safety protection.
(5) Adopt temperature measuring point open circuit and short circuit protection circuit to make temperature control safer. Packaging: British plug

Suggestions for thickness and temperature of plastic film:

• 200mic--180 ° C
• 170mic--170 ° C
• 150mic--160 ° C
• 125mic--140 ° C
• 100mic--130 ° C
• 80mic--110 ° C
• 70mic--100 ° C
• 60mic--90 ° C
• 50mic--80 ° C
• 40mic--70 ° C

Cold mounting -- no heating state (suitable for cold mounting of film with a thickness of about 0.6mm). The above Suggestions can be adjusted according to requirements.

Prepare: Insert the plug into the power socket, turn on the power switch, the power light is on (red), then the motor starts working properly. Turn on the preheating power and start preheating. The temperature rises rapidly.

Temperature setting: Set the button at the desired temperature and preheat for about 3 minutes. When the temperature rises to the set temperature, the working light will be switched on and off several times. Temperature tends to be stable, at this point, you can carry out plastic sealing work. In the process of work, the constant light will flicker, repeated light and shade changes. It means that the lights are constantly flashing, changing light and shade repeatedly. Refers to the internal constant temperature system in the machine when the heating stops in the conversion heating state, is a normal phenomenon.

Application:

This machine is widely used to envelop ID cards, office documents, photos and documentary cards. The cards packaged can resist against water, alteration pollution, improve their strength and appearance and extend their storage life.
 
Specification: 

Maintenance:

1. This machine is an electrical product, so it cannot be sprayed directly with water.
2. Unplug the plug before fixing it.
3. Do not use gasoline, thinners or metal blades.
4. Remove dust from the machine with a soft cloth.If the dust is very thick, remove it with a neutral soap or cleaner.
5. The rubber roller and shafei sleeve are regularly filled with high temperature resistant light lubricating oil.

Attention remarks:

1. Placement
Plastic packaging machine shall be placed in dry and clean condtions, but not close to the outlet of cooling equipment.
 
2. Machine operation
Don't spray water onto the machine.
When the machine is heating, don't place any objet on its upper cover and casing.
 
3. Sealing material
What is to be packaged in the card protective film can only be paper and card, total thickness not greater than 1mm. Don't insert any inflammbale material (such as celluloid) and wasily softened material (such as PVC and polythene) into the machine, as they can be melt down in the machine and product smoke.
 
Packing: