Shenzhen Topband Battery Co., Ltd
| Supply Ability | 450Mwh/year |
| Delivery Time | 2~4weeks for samples; 4~6weeks for mass production |
| Packaging Details | standard export carton |
| Payment Terms | L/C, T/T |
| Material | LiFePO4 |
| Battery moudle Voltage | 24V |
| Capacity | 20Ah / 50Ah / 100Ah / 150Ah / 200Ah |
| Protection | PCM / BMS for protection |
| Case | plastic case / metal case |
| Battery module | series-parallel connection |
| Cycle life | 2000 times at 100% DOD |
| Warranty | 2 years |
| Brand Name | Topband |
| Model Number | TB-lithium battery module |
| Certification | ISO9001/ISO14001 |
| Place of Origin | China |
View Detail Information
Explore similar products
Customized Lithium Battery Module , Battery Backup Module Flexible Assembly
12V Rechargeable Lithium Battery Module 20Ah / 50Ah / 100Ah / 150Ah / 200Ah /
Lithium Rechargeable Battery Pack With ISO9001 / ISO14001 Certificate
12V Lithium Battery Module For UPS / RV / Solar Energy / LED Light
Product Specification
| Supply Ability | 450Mwh/year | Delivery Time | 2~4weeks for samples; 4~6weeks for mass production |
| Packaging Details | standard export carton | Payment Terms | L/C, T/T |
| Material | LiFePO4 | Battery moudle Voltage | 24V |
| Capacity | 20Ah / 50Ah / 100Ah / 150Ah / 200Ah | Protection | PCM / BMS for protection |
| Case | plastic case / metal case | Battery module | series-parallel connection |
| Cycle life | 2000 times at 100% DOD | Warranty | 2 years |
| Brand Name | Topband | Model Number | TB-lithium battery module |
| Certification | ISO9001/ISO14001 | Place of Origin | China |
| High Light | Battery Backup Module ，Battery Pack Module | ||
24V / 36V / 48V Battery Backup Module , Battery Pack Module LiFePO4
1. Lithium battery module advantage
A. Extremely safe and stable chemistry: PCB and/or BMS built inside to balance protect the battery.
B. Long life-cycle: Can be circularly used, best can up to 2000 times recycles, 8 times of Lead acid battery.
C. Lighter weight, with the best power-to-weight ratio: 1/3 of Lead acid battery weight.
D. Good performance at high temperature and high temperature resistance
E. Low self-discharge rate, less than 3% monthly.
F. No memory effects and highly efficient charge.
G. Environment friendly: Clean and Green energy poses no pollution on our environment.
2. Lithium battery module can be assembled with various cells,
Available to make all customzied battery pack. Cell's details as below:
| 3.2V Lithium Iron Phosphate Cells | ||||||
| Cell Model | Volt(V) | Capacity(Ah) | Inpendance(mΩ) | Weight(g) | Cycle life | Cycle condition |
| TB-01865135C-12Ah | 3.2V | 12Ah | ≤12 | 310±10 | 2000 cycles | 100% DOD |
| TB-02707145C-20Ah | 3.2V | 20Ah | ≤10 | 525±10 | 2000 cycles | 100% DOD |
| TB-02707145D-20Ah | 3.2V | 20Ah | ≤4 | 525±10 | 2000 cycles | 100% DOD |
| TB-02707180C-25Ah | 3.2V | 25Ah | ≤6 | 650±10 | 2000 cycles | 100% DOD |
| TB-02707180D-25Ah | 3.2V | 25Ah | ≤4 | 650±10 | 2000 cycles | 100% DOD |
| TB-02707180C-27Ah | 3.2V | 27Ah | ≤4 | 660±10 | 2000 cycles | 100% DOD |
3. Electrical Characteristics
| item | Criteria | Test method |
| 3.1 High Temperature Discharge Performance
| Capacity retention at 55℃ :≥95%
| A cell is charged in accordance with 3.2, and stored in high temperature chamber at 55℃for 5 h, then discharged to cut-off voltage at a constant current of 1C. After that, fetch out the cell and place it in the ambient temperature of 25℃±5℃ for 4 h, then check its appearance |
| 3.2 Low Temperature Discharge Performance
| Capacity retention at -20℃ :≥70%
| A cell is charged in accordance with 3.2, and stored in certain ambient temperature for 24hours,then discharged to cut-off voltage(1.8V) at a constant current of 1C. After that , fetch out the cell and place it in the ambient temperature of 25℃±5℃for 4hours. |
| 3.3 Rate Charge Performance in Normal Temperature
| 2C charge capacity≥80%
| Under the ambient temperature of 25℃±5℃, a, 1C constant discharge till the cut-off voltage, standby for 1h; b, charge at 2C current till 3.65V, standby for 1h; c, constant discharge with 1C current till 2.0V.
|
| 3.4 Rate Discharge Performance in Normal Temperature
| 3C discharge capacity≥95%
| A cell is charged in accordance with 3.2, then discharged to cut-off voltage at certain current in an ambient temperature of 25℃±5℃.
|
| 3.5 Cycle Life (25℃±5℃)
| ≥2000cycles | A cell is 1C CC/CV 3.65V fully charged, after that stored for 30min;Subsequently, the cell is discharged to cut-off voltage at a constant current of 1C, and stored 30min prior to next charge-discharge cycle, until the capacity retention＜80%, and record all the cycles
|
4. Safety Test
| No. | Item | Test Method | Criteria |
| 4.1 | Short- circuit Test | A cell is tested in accordance with 3.2, after that the cell is short-circuited by connecting the positive and negative terminals with a wire for 10min, the wire has a maximum resistance load of 5mΩ., then observe for 1h. | No fire, no explosion |
| 4.2 | Overcharge Test
| A cell is tested in accordance with 3.2, then 1C constant current charged till the voltage reaches 1.5 times of the specified end-off charge voltage, or the charge time reaches 1h, then stop charge, and observe for 1h. |
No fire, no explosion
|
| 4.3 | Over discharge test | A cell is tested in accordance with 3.2, then 1C discharge for 90min, then observe for 1h.
|
No fire, no explosion, no leakage
|
| 4.4 | Crush Test
| A cell is tested in accordance with 3.2, and then is placed on the crush machine, the axis is parallel to the crush equiment, and it is crushed between two flat surfaces till the crushing force is gradually approaching 200 kN, or voltage reaches 0V,or reaches 30% distortion, then observe for 1h. |
No fire, no explosion
|
| 4.5 | Impact Test
| A cell is tested in accordance with 3.2, and then placed on the impact flat. A Φ15.8mm bar is to be placed on the center of the cell. A 9.1kg weight is dropped from a height of 610mm onto the cell, the distortion is allowed. |
No fire, no explosion
|
| 4.6 | Stick Test | a) A cell is tested in accordance with 3.2 b) use φ5mm～φ8mm high temperature resistance steel needle, with speed of 25±5mm/s, to go through the cell from vertical direction of pole plate, the penetrate position should be close to the geometric center of plate surface, the steel needle remains in the cell;
|
No fire, no explosion
|
| 4.7 | Heating Test(130℃)
| A cell is tested in accordance with 3.2, and then heated in a circulating air oven. The temperature of the oven is raised at a rate of 5℃ per minute to 130℃±3℃ and remain for 30 min.
|
No fire, no explosion
|
5. Our Service
6. Lithium battery module solution
Company Details
Business Type:
Manufacturer,Exporter
Year Established:
1996
Total Annual:
240million-250million
Employee Number:
5000~5500
Ecer Certification：
Active Member
Shenzhen Topband Co., Ltd. was registered in so-called “China Silicon Valley”, Shenzhen Hi-tech Industrial Park in 1996, and got listed in Shenzhen Stock Exchange ( the stock code as 002139) in 2007. After years of rapid development, now Topband takes lithium battery as the ... Shenzhen Topband Co., Ltd. was registered in so-called “China Silicon Valley”, Shenzhen Hi-tech Industrial Park in 1996, and got listed in Shenzhen Stock Exchange ( the stock code as 002139) in 2007. After years of rapid development, now Topband takes lithium battery as the ...
Get in touch with us
Leave a Message, we will call you back quickly!