Xi'an Dehou Electronic Technology Co., Ltd.
| Payment Terms | T/T |
| Supply Ability | 1000 pcs/ pre month |
| Delivery Time | 5-7 work days |
| Packaging Details | Export standard packing |
| Applications | Deep well, oversize range |
| Probe type | Soft rope |
| Measuring Range | 0~120m |
| Process connection | Screw thread, Flange(optional), |
| Protection grade | Display instrument IP67, IP67 |
| Operating temperature | -40～150℃ |
| Signal output | 4-20mA, 4-20mA/HART(Two wire/FOUR wire) |
| Power supply | （13-35）vDC |
| Brand Name | NUOYINGJIAYE |
| Model Number | NYSP-Z20 |
| Certification | Explosion-proof certificate |
| Place of Origin | China |
View Detail Information
Explore similar products
NYSP-M21 RF Admittance Level Transmitter For Low Dielectric Constant Liquid
Circuit RF Admittance Level Transmitter For Strong Corrosive Liquid
13 - 35VDC RF Admittance Level Transmitter For Strong Stirring Conditions
NYSP-M16 Anti Hang Ability Stable Reliable RF Admittance Level Meter
Product Specification
| Payment Terms | T/T | Supply Ability | 1000 pcs/ pre month |
| Delivery Time | 5-7 work days | Packaging Details | Export standard packing |
| Applications | Deep well, oversize range | Probe type | Soft rope |
| Measuring Range | 0~120m | Process connection | Screw thread, Flange(optional), |
| Protection grade | Display instrument IP67, IP67 | Operating temperature | -40～150℃ |
| Signal output | 4-20mA, 4-20mA/HART(Two wire/FOUR wire) | Power supply | （13-35）vDC |
| Brand Name | NUOYINGJIAYE | Model Number | NYSP-Z20 |
| Certification | Explosion-proof certificate | Place of Origin | China |
| High Light | IP67 Admittance Type Level Switch ，Admittance Type Level Switch 120m ，IP67 admittance level sensor | ||
NYSP-Z20 Soft RopeRf Admittance Level Meter Deep Well Oversize Measuring Level Transmitter
NYSP-Z20 Rf Admittance Level Meter
The NYSP-Z20 Rf admittance level meter is based on the principle of radio frequency admittance level measurement products continuously.The product has high stability, high sensitivity and wide applications, etc.Compared with the traditional capacitive material level meter, the use of modular design, can be concise and easily realize the instrument set, once set, can be normal use and free maintenance for life.Enables users to intuitive understanding of the running status of equipment, and deal with the problems in time, in the complex industrial occasions as well as safe and reliable.
Rf Admittance Level Meter Technical Parameter
| Applications | Deep well, oversize range |
| Probe type | Soft rope |
| Measuring Range | 0~120m |
| Process temperature | -40～150℃ |
| Ambient temperature | -40 ℃ ~ + 70 ℃ |
| Storage temperature | -20 ℃ ~ + 65 ℃ |
| Process pressure | -0.1～1.6MPa |
| Power supply | (13-35)vDC |
| Signal output | 4...20mA/HART/RS485/Modbus... |
| Process connection | Thread/Flange(selective) |
| Protection class | IP67 |
| Explosion-proof grade | ExiaⅡCT6(selective) |
| Delay: | 0 ~ 30 s adjustable |
※ Note: Products can be customized according to the specific requirements of users!
Rf Admittance Level Meter Design Features
◎ The unique Driving - shields circuit design can improve the ability to resist hanging
◎ No dead zone measurement, can be applied to more than ten or even a few cm level measurement occasions
◎ The output of the stable and reliable, fly ash, blanking, water vapor, crystallization, wax
◎ No activities, no easy worn parts, often without cleaning and maintenance, debugging
Rf Admittance Level Meter Installation requirements
Installation instructions
(1) the meter probe and other probe should have sufficient space, the proposal is more than 600mm, see "1" and "2", "2" and "3" in the picture.
(2) there should be sufficient space between the instrument probe and feeding port, and the proposal is greater than 600mm, as shown in fig.1.Otherwise, the instrument will not work properly.
See "4" in the picture.
(3) the probe cannot reach the bottom of the tank.See the "4" probe too long.It must be cut short.Otherwise, the instrument will not work properly.
(4) the lower end of the probe cannot enter the cone range of the cone outlet.See "5" in the figure, such installation, the tension capacity of the material in this place
Easy to damage the probe or damage the roof.
(5) make sure that there is sufficient distance between the materials that are attached to the silos and silos, and the proposal is more than 600mm, as shown in fig.2.It's too close to the wall, detective
The slightest oscillation of the head will contact the material on the wall or the wall, causing the instrument to not work properly, as shown in FIG. 6.
(6) see "6)" in the picture, the side installation, also called the fishing rod type installation, do not recommend such installation.
FIG. 4 details of the bottom of the tank are as follows:
The probe in figure A must be straightened to prevent hitting the wall.
The probe in figure B is too long and must be truncated.Short-time contact manufacturer.
Company Details
Business Type:
Manufacturer
Year Established:
2015
Total Annual:
1500000-180000
Employee Number:
60~80
Ecer Certification：
Verified Supplier
Company Introduction Xi'an Dehou Electronic Technology Co., Ltd. is a high-tech enterprise specializing in research and development, production, sales of industrial automation instruments and providing Internet of Things solutions. At present, the company has ... Company Introduction Xi'an Dehou Electronic Technology Co., Ltd. is a high-tech enterprise specializing in research and development, production, sales of industrial automation instruments and providing Internet of Things solutions. At present, the company has ...
Get in touch with us
Leave a Message, we will call you back quickly!