Shenzhen Zhongguanda Technology Co., Ltd.
| Payment Terms | L/C, Western Union, Western Union, T/T |
| Delivery Time | 10-15 work days |
| Output Type | Single |
| Output Current | 4A |
| Output Frequency | 50/60Hz |
| Size | 173*94*146 mm |
| Weight | 1.4 kg |
| Input Current | 8.2 A |
| Frequency Range | ±5% (47.5 ~ 63Hz) |
| Nominal Capacity | 1.5 KVA |
View Detail Information
Explore similar products
AC220V 2.2kw 3HP Variable Frequency Drives VFD For Forging Machine Tool
Output 7A 50Hz 60Hz Variable Frequency Drives 1.5 Kw VFD VSD
380V 5.5kw 7.5HP VFD adjustable frequency drive Three Phase
AC380V 11kw 15HP Variable Frequency Drives Three Phase Overloading Type
Product Specification
| Payment Terms | L/C, Western Union, Western Union, T/T | Delivery Time | 10-15 work days |
| Output Type | Single | Output Current | 4A |
| Output Frequency | 50/60Hz | Size | 173*94*146 mm |
| Weight | 1.4 kg | Input Current | 8.2 A |
| Frequency Range | ±5% (47.5 ~ 63Hz) | Nominal Capacity | 1.5 KVA |
| High Light | 1HP Variable Frequency Inverter ，0.75kw 1HP VFD ，0.75kw Single Phase VFD | ||
AC220v 0.75kw 1HP Variable Frequency Drive For Metallurgical Equipment
Single Phase VDF AC 220v 0.75kw 1HP Variable Frequency Drive For Metallurgical Equipment
Models Overview
| MODEL | Nominal Capacity (KVA) | Input Current (A) | Output Current (A) | Applicable Motor Output (KW) |
| Single Phase 220V 50/60Hz | ||||
| Astro 0.75G-S2 | 1.5 | 8.2 | 4 | 0.75 |
| Astro 1.5G-S2 | 3 | 14 | 7 | 1.5 |
| Astro 2.2G-S2 | 4 | 23 | 9.6 | 2.2 |
| 3-Phase 380V 50/60Hz | ||||
| Astro 0.75G-T4 | 1.5 | 3.4 | 2.1 | 0.75 |
| Astro 1.5G-T4 | 3 | 5 | 3.8 | 1.5 |
| Astro 2.2G-T4 | 4 | 5.8 | 5.1 | 2.2 |
| Astro 3.7G-T4 | 6 | 10.5 | 9 | 3.7 |
| Astro 5.5G-T4 | 9 | 14.6 | 13 | 5.5 |
| Astro 7.5G-T4 | 11 | 20.5 | 17 | 7.5 |
| Astro 11G/15P-T4 | 17 | 26 | 25 | 11 |
| Astro 15G/18.5P-T4 | 21 | 35 | 32 | 15 |
| Astro 18.5G/22P-T4 | 24 | 38.5 | 37 | 18.5 |
| Astro 22G/30P-T4 | 30 | 46.5 | 45 | 22 |
Astro Variable Frequency Drive
0.75KW ~ 22KW
Product Specification
| Functional Descriptions | Specifications |
| SPECIAL FEATURES | |
| Non-stop | In case of power loss, the energy from load feedback is used to compensate and decelerate the motor until standstill, to prevent mechanical damage. |
| Rapid current limit | Reduce the risk of over-current faults to keep VFD operated normally. |
| Virtual IO | Supportfive sets of virtual DIDO to facilitate logic control |
| Timer control | Setting range: 0.0Min ~ 6500.0Min |
| Communication | Modbus |
| INPUT/OUTPUT | |
| Command source | Operation panel, control terminal and serial communication port. |
| Frequency source | Digital setting, Analog voltage setting, Analog current setting, Pulse setting and Serial port setting. |
| Auxiliary frequency source | 5 options to provide flexible auxiliary frequency fine-tuning and frequency synthesis. |
|
Input terminals | 4 digital input terminals, one of which supports high-frequency pulse input up to 50kHz |
| 1 analog input terminal supporting 0 ~ 10V voltage input or 0 ~ 20mA current input | |
| 1 rotary potentiometer analog input | |
|
Output terminals | 1 high-speed pulse output terminal supporting 50kHz step-wave signal output |
| 1 relay output terminal | |
| 1 analog output terminal supporting 0~20mA current output or 0~10V voltage output | |
| DISPLAY BUTTONS | |
| LED display | Display parameters |
| Key lock and function selection | It allows users to partially or fully lock the keys or define operated range for partial keys to prevent misoperation |
| Protective function | Motor short-circuit detection at power-on, output phase loss protection, over-current protection, over-voltage protection, under-voltage protection, overheat protection, overload protection and etc. |
| ENVIRONMENT | |
| Storage temperature | -20°C ~ 60°C |
| Operation temperature | -10°C ~ 50°C (If temperarture is higher than 40°C, the output capacity will be derated 1% per 1°C increase) |
| Storage humidity | ＜ 90% RH |
| Operation humidity | ＜ 90% RH |
| Noise Level | 50dBA Max. |
| OTHERS | |
|
EMI | Standards |
| IEC 61800-3: C3 | |
|
Safety | CE Report and CE mark |
| Standards | |
| INTERACE | |
| Communication Port | RS-485 |
| MODEL | Recommended cable size (mm²) | Set Screws | ||||
| RST | PE | P1 (+) | PB (+) | Screw spec | Torque(Nm) | |
| UVW | (-) | |||||
| Astro 0.75G-S2 | 1.5 | 1.5 | 1-4 | 1-4 | M3 | 0.8 |
| Astro 1.5G-S2 | 2.5 | 2.5 | 1-4 | 1-4 | M3 | 0.8 |
| Astro 2.2G-S2 | 2.5 | 2.5 | 1-4 | 1-4 | M3 | 0.8 |
| Astro 0.75G-T4 | 1.5 | 1.5 | 1.5 | 1.5 | M4 | 1.2~1.5 |
| Astro 1.5G-T4 | 1.5 | 1.5 | 1.5 | 1.5 | M4 | 1.2~1.5 |
| Astro 2.2G-T4 | 2.5 | 2.5 | 2.5 | 2.5 | M4 | 1.2~1.5 |
| Astro 3.7G-T4 | 2.5 | 2.5 | 2.5 | 2.5 | M4 | 2~2.5 |
| Astro 5.5G-T4 | 4 | 4 | 2.5 | 2.5 | M5 | 2~2.5 |
| Astro 7.5G-T4 | 6 | 6 | 4 | 2.5 | M5 | 2~2.5 |
| Astro 11G/15P-T4 | 10 | 10 | 6 | 4 | M5 | 2~2.5 |
| Astro 15G/18.5P-T4 | 10 | 10 | 10 | 4 | M5 | 2~2.5 |
| Astro 18.5G/22P-T4 | 16 | 16 | 10 | 6 | M6 | 4~6 |
| Astro 22G/30P-T4 | 16 | 16 | 10 | 6 | M6 | 4~6 |
Company Details
Business Type:
Manufacturer,Exporter,Seller
Total Annual:
1000000-5000000
Employee Number:
zgd001~zgd500
Ecer Certification：
Site Member
As a manufacturer with over 10 years of experience, Shenzhen ZGD Technology Co., Ltd. has more than 10 production lines which can produce 100,000 pieces of UPS every month. Over 10% of our staff members are engineers and professional technicians and more than 400 are skilled workers. Our company spe... As a manufacturer with over 10 years of experience, Shenzhen ZGD Technology Co., Ltd. has more than 10 production lines which can produce 100,000 pieces of UPS every month. Over 10% of our staff members are engineers and professional technicians and more than 400 are skilled workers. Our company spe...
Get in touch with us
Leave a Message, we will call you back quickly!