2km SMF Optical Module 10-3284-02 Cisco QSFP 100G FR S With Duplex LC Connector

Product Specification

Cisco QSFP-100G-FR-S 10-3284-02 QSFP28 100G FR 2km SMF Optical Module With Duplex LC Connector

Cisco QSFP-100G-FR-S Transceiver's Overview

The QSFP28 FR-S module supports 100G link lengths of up to 2km over duplex G.652 SMF. It accepts duplex LC connectors. FR-S is a single-lambda 100G optic and contains an internal processor chip that performs PAM4 (Pulse Amplitude Modulation), KP4 FEC (Forward Error Correction), and a gearbox to convert the 4x25G electrical signals from the host port to a single channel 100G optical signal.

FR-S interoperates with 400G optical interfaces such as IEEE 400GBASE-DR4, and Cisco’s 4x100G FR QSFP-DD module via fiber breakout cable. FR-S complies with the 100G-FR specification issued by the 100G Lambda MSA. It is primarily used in data center, enterprise, and service provider applications.

Parameters for the Cisco QSFP28 100G Optical Transceiver:

The first product in Cisco’s line of single-lambda 100G optics is the 100G FR (Product ID QSFP-100G-FR-S). It’s a 100G pluggable optical transceiver in a QSFP28 form factor that performs PAM4 modulation, among other things, inside the module. It complies with the 100G Lambda MSA’s 100G-FR specification, which has a reach of 2km over duplex SMF and uses duplex LC connectors. This is the same reach, fiber, and connector as CWDM4 which has been very popular in data centers. You can use FR in any application that CWDM4 has been used.

When it comes to network deployment strategies, you may be accustomed to treating pluggable optics as an afterthought. But over the past several years, higher data rate pluggable optics have been developed to keep up with bandwidth demands in data centers and service provider networks. And with those higher data rates comes increased complexity in transceiver module design and their interactions with switch and router host ports. Today we’re at the point where 100G optics are a consideration in your network hardware cost and fiber infrastructure design.

Cisco’s vision is to simplify 100G pluggable optics. With fewer components in the pluggable module, we can scale manufacturing volume and cost to the level of today’s 10G SFP+ optics. Through silicon photonics and signal processing technology, Cisco has taken the first step toward that vision: single – lambda 100G optics. When new generation form factors are available, you’ll be able to re-use the first generation and transition gradually. It will also allow you to upgrade to 400G host platforms one site at a time.

Photo for Cisco QSFP28 100G QSFP-100G-FR-S Transceiver

FAQ

Q1. Except for this Cisco QSFP28 100G QSFP-100G-FR-S optical modules, what else Cisco sfp can you offer?

A1: Topstar can offer Cisco optical module from 1G SFP, 10G SFP+, 16G/32G FC SFP+, 25G SFP28, 40G QSFP+ to 100G QSFP28, etc....

Q2. How do you guarantee the Cisco QSFP28 100G optical transceiver you offer is genuine?

A2: 1st, Topstar's target is to be a respected century-enterprise, based on this, we only sell 100% genuine brand transceiver because reputation worths more;

2nd, Topstar works on this optical transceiver field for 16 years, we have our mature supply chain, all the Cisco cooperators is verfied;

3rd, we have our strict procedure for how to verify the identify true and false of the Cisco transceiver by label,appearance,serial number checking, and also test equipment;

4th, if you found any faked or copied Cisco optical module from us, we will refund and afford all the freight for ship and return;

Q3. How does your company do regarding quality control for this Cisco QSFP28 100G optical module?

A3: Every single optic individually tested in our test center to make sure it can work befor shipment;