Dongguan Haida Equipment Co.,LTD
| Payment Terms | L/C, D/A, D/P, T/T, Western Union, MoneyGram |
| Supply Ability | 300sets/month |
| Packaging Details | Each set protected with resin fiber and PP film, then put into Strong wooden case with operation manual and video inside. |
| Standard | BS EN IS) 8442:-5:2 |
| Cutting stroke | 20 to 60 mm (standard requirement is 40 mm) |
| Display | PLC & large touch screen monitor |
| Usa area | cookware |
| Travel speed | adjustable from 20 - 80 mm per second |
| Movement drive | ball screw and servo motor |
| test cycles setting | 4 digits pre-set counter |
| Feature | easy to operate |
| display | large touch screen monitor |
| Controller | PLC (programmable logic controller) |
| Brand Name | Haida |
| Model Number | TT-C09 |
| Certification | BS EN IS) 8442:-5:2 |
| Place of Origin | China(Mainland)Guangdong |
View Detail Information
Explore similar products
Corrugated roller grooved Paper Testing Equipments Electronic
Rub Resistance Paper Testing Equipments With Microcomputer Control
Automatic Corrugated Cardboard Bursting Resistance Strength Testing Equipment
Moisture Paper Testing Equipments Computer Control With Japans Advanced Sensor
Product Specification
| Payment Terms | L/C, D/A, D/P, T/T, Western Union, MoneyGram | Supply Ability | 300sets/month |
| Packaging Details | Each set protected with resin fiber and PP film, then put into Strong wooden case with operation manual and video inside. | Standard | BS EN IS) 8442:-5:2 |
| Cutting stroke | 20 to 60 mm (standard requirement is 40 mm) | Display | PLC & large touch screen monitor |
| Usa area | cookware | Travel speed | adjustable from 20 - 80 mm per second |
| Movement drive | ball screw and servo motor | test cycles setting | 4 digits pre-set counter |
| Feature | easy to operate | display | large touch screen monitor |
| Controller | PLC (programmable logic controller) | Brand Name | Haida |
| Model Number | TT-C09 | Certification | BS EN IS) 8442:-5:2 |
| Place of Origin | China(Mainland)Guangdong | ||
| High Light | paper testing instruments ，paper testing machine | ||
Knives Sharpness Laboratory Testing Equipment With PLC Screen
The need for such a cutting performance test is internationally agreed:
• To compare objectively various knife blades and determine which one is superior to another.
• To monitor the consistency of quality of cutting performance against the norm of manufacturing to be sure that the knives are within the standard values agreed upon.
• To be used as a development tool to enable research into the optimum steel, heat treatment, surface coating, edge geometry and finishing operations to suit the application.
• The machine system answers the questions " How sharp is it?" and " How long will the sharpness last?"
Methodology:
The knife is fixed in the machine and the blade is mounted in a position with the edge vertical. The blade is moved back and forth whilst a pack of special testing paper is lowered onto the blade. The blade cuts through the paper and the sharpness is then measured.
Two measurements are produced:
1. Initial Cutting Performance (ICP)
This measurement is based on the first 3 strokes, which represents the cutting ability or the sharpness of the blade.
2. Total Card Cut (TCC)
This is measured by conducting over 60 strokes, which represents the life of the blade.
These two measurements are produced and recorded by a microcomputer for each of the knives tested.
| Item | Specification |
| Applicable Standards | EN ISO 8442-5 |
| Test stoke | 20 to 60 mm (adjustable) |
| Load between the test media and the test blade | 50N |
| Cutting speed | 50 mm/second over 90% of the specified stroke |
| Max blade width | 110 mm (include 50 mm of cut) |
| Controller | PLC Programmable controller, LCD Touch screen interface |
| Result Output | USB Flash Drive – Print Out the Image File Tabular or graphical presentation of result |
| Connection | USB interface (Optional) |
| Compressed air requirement | 3 L/min at 6 bar |
| Power | 1 phase, AC 220V, 50～60Hz (Customized) |
Advantages:
1. Ball screw with servo motor to ensure high accuracy of movement
2. Linear optical scale, Laser displacement detector
3. PLC programmable controller, LCD touch screen interface, easy to operate
4. Automatic add paper during test
5. With USB interface to output test results
6. Display test results and graph
7. Two test items: Initial Cutting Performance (ICP) and Total Card Cut (TCC)
Company Details
Business Type:
Manufacturer
Year Established:
2003
Total Annual:
5000000-7000000
Employee Number:
80~100
Ecer Certification：
Verified Supplier
Haida established in 2004 in Dongguan City, where is the “silicon valley” of world manufacturing industry. It is a certified national high-tech enterprise engaged in design, research and development, production, sales, calibration and after-sale service of test equipment, such as pap... Haida established in 2004 in Dongguan City, where is the “silicon valley” of world manufacturing industry. It is a certified national high-tech enterprise engaged in design, research and development, production, sales, calibration and after-sale service of test equipment, such as pap...
Get in touch with us
Leave a Message, we will call you back quickly!