Dongguan Haida Equipment Co.,LTD
| Payment Terms | L/C,D/A,D/P,T/T,Western Union,MoneyGram,In cash, escrow |
| Supply Ability | 300 Sets per Month Haida |
| Delivery Time | 20 days after order confirmed |
| Packaging Details | Each set protected with resin fiber and PP film, then put into Strong wooden case with operation man |
| Temp. range | -70°C~150°C |
| Resolution | 0.1°C, 1 percent, P.I.D control |
| Heating up | -40°C ~ +100°C within 45 min |
| Heating down | 20°C~ -20°Cwithin 40min |
| Power | AC220V±10 percent 50/60Hz |
| Display | LCD |
| Weight | Approx. 250 kg |
| Temp. & Humid. regularity | ± 2°C; ± 5 percent RH |
| Insulation | Rigid foam |
| Exterior dimension(W×D×H) | 95x150x105cm |
| Brand Name | HAIDA |
| Model Number | HD-E702-100 |
| Certification | ISO 9001:2000; ISO 9001:2008; QS-9000; ISO 14001:2004; CE, , SMC, CMC, CPA, CE,CMA,IMC |
| Place of Origin | Guangdong, China (Mainland) |
View Detail Information
Explore similar products
Formaldehyde Testing Chamber / Climate Test Chamber High Accuracy
Automobile Environmental Test Chambers , Ozone Durable Aging Testing Chamber
Anti Corrosive Environmental Test Chambers Salt Spray Corrosion Tester
Auto Environmental Test Chambers , Carbon Steel Benchtop Drying Oven To Dry
Product Specification
| Payment Terms | L/C,D/A,D/P,T/T,Western Union,MoneyGram,In cash, escrow | Supply Ability | 300 Sets per Month Haida |
| Delivery Time | 20 days after order confirmed | Packaging Details | Each set protected with resin fiber and PP film, then put into Strong wooden case with operation man |
| Temp. range | -70°C~150°C | Resolution | 0.1°C, 1 percent, P.I.D control |
| Heating up | -40°C ~ +100°C within 45 min | Heating down | 20°C~ -20°Cwithin 40min |
| Power | AC220V±10 percent 50/60Hz | Display | LCD |
| Weight | Approx. 250 kg | Temp. & Humid. regularity | ± 2°C; ± 5 percent RH |
| Insulation | Rigid foam | Exterior dimension(W×D×H) | 95x150x105cm |
| Brand Name | HAIDA | Model Number | HD-E702-100 |
| Certification | ISO 9001:2000; ISO 9001:2008; QS-9000; ISO 14001:2004; CE, , SMC, CMC, CPA, CE,CMA,IMC | Place of Origin | Guangdong, China (Mainland) |
| High Light | environmental testing equipment ，humidity temperature test chamber | ||
220V Constant Temperature And Humidity Chambers,PCL Control Environment Chamber
Product Features
1. Freezer imported by the French original armored warrior compressor and use environmental-friendly refrigerant (R134a, R404a, R23).
9. Frozen system uses units or low-temperature dual-loop system design.
2. Use more powerful wing-blower air supply cycle, to avoid any dead end, temperature and humidity are evenly distributed in the test region.
3. Wind-road cycle adopted the design of blowing side wind and return wind. Wind pressure and wind speed are in accord with test standards, and make the door instantaneous temperature and humidity open that is stabilized time soon.
4. Heating, cooling, humidification and dehumidification system is totally unaided to improve efficiency, reduce testing cost, increase life expectancy and lower failure rate.
Specification
| Model | HD-150T |
| System | Balanced Temperature & Humidity Control System |
| Temp. range | -70°C~150°C |
| Humid. range | 20 ~ 98 percent R.H. |
| Temp. & Humid. accuracy | ± 0.3°C; ± 2 percent R.H |
| Temp. & Humid. regularity | ± 2°C; ± 5 percent RH |
| Resolution | 0.1°C, 1 percent, P.I.D control |
| Heating up | -40°C ~ +100°C within 45 min |
| Heating down | 20°C~ -20°Cwithin 40min |
| Interior dimension(W×D×H) | 50×60×50cm |
| Exterior dimension(W×D×H) | 95x150x105cm |
| Interior material | Stainless steel plate(SUS304) |
| Exterior material | Stainless steel plate(SUS304) |
| Insulation | Rigid foam |
| Refrigeration system | Air cooled, Hermetic compressor, |
| Display | LCD |
| Safety devices | No fuse breaker refrigerator over load relay, Refrigeration High pressure Switch, Over Temp, Protector, Protection relay, Protection fuse, Water Lever protector, Overheat protector, Alarm |
| Accessories | Viewing window, Shelves (freely adjustable 2 pcs.), Cable port(Ø50mm)Chamber lamp. |
| Weight | Approx. 250 kg |
| Power | AC220V±10 percent 50/60Hz |
About Haida
Haida products are widely used in paper products, packaging, ink printing, adhesive tapes, bags, footwear, leather products, environment, toys, baby products, hardware, electronic products, plastic products, rubber products and other industries, and are applicable to all scientific research units, quality inspection institutions and academic fields. Our products meet UL, ASTM, JIS, GB,SO, TAPPI, EN, DIN, BS and other domestic and international standards.
Company Details
Business Type:
Manufacturer
Year Established:
2003
Total Annual:
5000000-7000000
Employee Number:
80~100
Ecer Certification：
Verified Supplier
Haida established in 2004 in Dongguan City, where is the “silicon valley” of world manufacturing industry. It is a certified national high-tech enterprise engaged in design, research and development, production, sales, calibration and after-sale service of test equipment, such as pap... Haida established in 2004 in Dongguan City, where is the “silicon valley” of world manufacturing industry. It is a certified national high-tech enterprise engaged in design, research and development, production, sales, calibration and after-sale service of test equipment, such as pap...
Get in touch with us
Leave a Message, we will call you back quickly!