Haining Idol Imp. & Exp. Co., Ltd.
| Fabric | 100% polyester |
| Color | GREY |
| Size | XS,S,M,L,XL,XXL |
| Sleeve | long sleeve |
| Lining | black mesh lining |
| Fabric type | woven |
| Rib | 100%polyester in black |
| Delivery Time | 10-15days after pp approval |
| Brand Name | HEMISPHERE |
| Model Number | XS, S, M, L, XL, XXL |
| Place of Origin | China |
View Detail Information
Explore similar products
Cobalt Quilted Mens Polyester Bomber Jacket With Branded Tape On Sleeve TW80378
Men's Fatigue Polyester Bomber Jacket With Tap On Zip Pocket TWS15781
Chunky Denim Look Polyester Nylon Wadded Puffer Jacket With Rib Detail TW64465
Mens Navy Blue Bomber Jacket With Tape On Front Chest Exstreamed On Sleeve
Product Specification
| Fabric | 100% polyester | Color | GREY |
| Size | XS,S,M,L,XL,XXL | Sleeve | long sleeve |
| Lining | black mesh lining | Fabric type | woven |
| Rib | 100%polyester in black | Delivery Time | 10-15days after pp approval |
| Brand Name | HEMISPHERE | Model Number | XS, S, M, L, XL, XXL |
| Place of Origin | China | ||
| High Light | men's polyester coat ，male bomber jacket | ||
Men's Grey Polyester Bomber hooded Jacket With black rib and mesh lining TW83339
SPECIFICATIONS :
| NAME | POSITION | SIZE | COLOR | QTY |
| NYLON ZIP | PLACKET & CHEST & POCKETS | #5 | DTM | 4 |
| EYELET | HOOD | 9MM | GUNMETAL | 4 |
| TOGGLE | HOOD | BLACK | 2 | |
| DRAWCORD | HOOD | 8MM | BLACK | 1 |
| MAIN LABLE | CB | 50X88 | 1 | |
| SIZE LABLE | CB | 1 | ||
| CARE LABLE | 10CM ABOVE HEM | 1 | ||
| HANGTAG | LSW CUFF | 1 |
MEASUREMENTS:
| MEASUREMENTS | Tolerances | X-Small | Small | Medium | Large | X-Large | XX-Larg |
| Hood Height at Opening | 10/5 | 36 | 36 | 36.5 | 37 | 37.5 | 38 |
| Hood Width at Widest | 19/5 | 23.5 | 24 | 25 | 26 | 27 | 28 |
| Collar Leading Edge | 0/0 | 7 | 7 | 7 | 7 | 7 | 7 |
| Across Back Neck (HSP to HSP) | 5/5 | 19 | 19.4 | 20.2 | 21 | 21.8 | 22.6 |
| Neck Drop (seam to seam) | 5/5 | 7.8 | 8.2 | 8.6 | 9 | 9.4 | 9.8 |
| Across Front Mid-Armhole or Yoke | 10/10 | 36.5 | 37.6 | 39.8 | 42 | 44.6 | 47.2 |
| Across Back Mid-Armhole or Yoke | 10/10 | 38.5 | 39.6 | 41.8 | 44 | 46.6 | 49.2 |
| Half Chest at Underarm | 10/10 | 46 | 48 | 52 | 56 | 62 | 68 |
| Shoulder Seam ex Neck Trim | 5/5 | 12 | 12.4 | 13.2 | 14 | 14.8 | 15.6 |
| Half Bicep at Underarm Pt | 5/5 | 18.5 | 19 | 20 | 21 | 22.5 | 24 |
| Half Hem Width - Straight Across | 10/10 | 38 | 40 | 44 | 48 | 54 | 60 |
| Half Armhole (Diagonal) | 5/5 | 22 | 22.5 | 23.5 | 24.5 | 26 | 27.5 |
| Half Cuff Width | 5/5 | 8.5 | 9 | 9.5 | 10 | 11 | 12 |
| Cuff Depth | 0/0 | 5.5 | 5.5 | 5.5 | 5.5 | 5.5 | 5.5 |
| Front Length (from HSP) | 10/15 | 67 | 68 | 70 | 72 | 74 | 76 |
| C/Back Length from Neck Seam | 10/15 | 65 | 66 | 68 | 70 | 72 | 74 |
| Welt Depth | 10/15 | 5.5 | 5.5 | 5.5 | 5.5 | 5.5 | 5.5 |
| Sleeve Length (including Cuff) | 10/10 | 66.5 | 67 | 67.5 | 68 | 68.5 | 69 |
| Print position from HSP | 10/10 | 15.5 | 16 | 17 | 18 | 19.5 | 21 |
Styling - Front:
HOOD:
- 3 Panel hood as per original.
- Panel seams of hood to be finished with foot stitch.
- Hood opening to be finished with tunnel stitch
- At drawcord opening to have 2x black coated eyelets. 9mm diameter.
- Chunky round drawcord; 8mm diameter, black, slightly finer weave than drawcord on sample.
- To have toggle on drawcord between the two eyelets as per sample
- Drawcord ending to come out at bottom of tunnel as per sample
- Drawcord endings to be rubber sealed; colour of seal = black. Drawcords must be knotted before sealing
- Front neck to be raised as per original.
- Finish neck seam with 5mm edge stitch.
SHOULDER SEAM:
Finish with edge stitch
CF ZIP:
-Change to size 5 reversed coated nylon coil zip
-To have branded black metal puller with black plastic tip. Tip to have raised swish
CHEST ZIP:
At LHSW
-Size 5 reverse nylon coil zip
-To have branded black metal puller with black plastic tip. Tip to have raised swish
-Zip to be concealed with a welt, finish welt with an edge stitch
-Functional pocket with poly lining
BOTTOM ZIPS:
-Slanted reverse nylon coil size 5 zips with rubber coating
-To have branded black black metal puller with black plastic tip. Tip to have raised swish
-Zips to have self fabric welt above zip, 2cm length
-Finish around zips with edge stitch
-Functional pocket with poly lining
PRINT AT RHSW:
- Chest print on LHSW chest
- Print to be 25mm in height, width adjusted propotionately
SIDE SEAM:
Finish with twin needle as per sample
HEM:
Self fabric inset at CF, finish with foot stitch
To have 1x1rib hem with good recovery, 5.5cm wide
SLEEVE:
-Standard set in sleeve
- Finish at armhole with foot stitch
- Cuff to be finished as original, 1x1 rib with good recovery. Cuff width 5.5cm
-Finish above cuff with foot stitch
BADGE ON SLEEVE:
Rubber badge
Black base, white wording
Back:
HOOD:
- 3 Panel hood as per sample.
- Panel seams of hood to be finished with foot stitch.
- Hood opening to be finished with tunnel stitch
- Finish neck seam with 5mm edge stitch.
BODY:
Horizontal cutline across back as per sample
SLEEVES:
As per front
HEM:
As per front
Inside:
HOOD LINING:
Mesh as original, black
BODY LINING:
Mesh as original, black
SLEEVE LINING:
To be poly as original, black
LABEL AT CB:
Black flat label with white wording, design attached
To be laid onto self fabric patch creating a 1cm border around label
TAPE LOOP:
As original, colour to be black
STORM FLAP:
As original, 2cm wide
INTERNAL POCKET:
Vetical welt pocket with popper closure as per sample
Finish with edge stitch
Specification
Company Details
Business Type:
Agent,Exporter,Trading Company
Year Established:
2013
Total Annual:
6,000,000-7,000,000
Employee Number:
60~100
Ecer Certification：
Active Member
Locattion: Haining Idol was set up in September 2013, which is located Haining city, Jiaxing, Zhejiang Province, 100km far away from Hangzhou, 150km from Shanghai. It is very convenient for customer to visit us or control quality. Products: Our main products is jacket, coat, faux ... Locattion: Haining Idol was set up in September 2013, which is located Haining city, Jiaxing, Zhejiang Province, 100km far away from Hangzhou, 150km from Shanghai. It is very convenient for customer to visit us or control quality. Products: Our main products is jacket, coat, faux ...
Get in touch with us
Leave a Message, we will call you back quickly!