8 Layer ENIG 1.5U SSD PCB Board NVME 2280 PCIE 128GB FR4 Substrate

Product Specification

8 Layer ENIG 1.5U SSD PCB Board NVME 2280 PCIE 128GB FR4 substrate

SSD NVME 2280 PCIE 128GB 8 Layer Printed Circuit Board

PCB Specifications: 

Part NO: SSDPCB00012

Layer Count: 8 Layer Printed Circuit Board

Finished Board Thickness: 0.9mm +/-0.05mm

Copper Thickness: 1/H/H/H/H//H/H1

Min Lind Space&Width: 3/3mil

Application Area: SSD(Solid State Drive)

Our Product Categories:

1 FR4 substrate PCB : 2 Layer Printed Circuit Board, 4 Layer PCB, 6 Layer PCB, 8 Layer PCB, 10 Layer PCB, 12 Layer PCB, 14 Layer PCB, 16 Layer PCB, 18 Layer PCB, 20 Layer PCB, 22 Layer PCB, 24 Layer PCB, HDI PCB, High frequency PCB.

2 Aluminum Substrate pcb: 1 Layer Aluminum PCB, 2 Layer Aluminum PCB, 4 Layer Aluminum PCB.

3 Flexible PCB: 1 Layer FPC, 2 Layer FPC, 4 Layer FPC, 6 Layer FPC

4 Rigid-Flex PCB: 2 Layer Rigid-Flex PCB, 4 Layer Rigid-Flex PCB, 6 Layer Rigid-Flex pcb, 8 Layer Rigid-Flex PCB, 10 Layer Rigid-Flex pcb

5 Ceramic substrate pcb: single Layer Ceramic pcb, 2 layer ceramic pcb

FAQ:

Q:What is PCB Shielding?

A: 

PCB Shielding is the mechanical method to protect Printed Circuit Boards (PCBs) from unwanted electromagnetic radiation by covering the PCBs completely or partially with metal shields.

The unwanted electromagnetic radiation is referred to as Electromagnetic Interference (EMI) which can interfere with the internal PCB components or external electronic circuits, hence corrupting the signal integrity.

PCB shields increase the Electromagnetic Compatibility (EMC) of printed circuit boards and protect them from EMIs.

A PCB may contain both conducted and radiated EMI from a number of sources, such as switching devices, switching pulses, high-speed digital signals, and clock signals. Current path obstructions, particularly in high-frequency PCBs, produce EMI and put the board's EMC at risk. Metal protrusions, such as heat sinks, act as antennas when operating at high frequencies and emit electromagnetic radiation. 

The EMI, generated internally or externally, is absorbed by the EMI shield. The shielding metal experiences a current flow as a result of this absorption and the ground plane is connected to the EMI shield, which prevents EMI currents from entering the critical circuit and interfering with its sensitive signals. 

PCB shielding can be used to shield the entire PCB or just a portion of it. This shield protects against information loss and shields the signal transmission from outside noise. 

Shielding Serves Two Main Objectives:.

When an electromagnetic wave's energy enters a shield and is reflected back, this is known as reflection (R) and Absorption (A) occurs when any residual electromagnetic wave energy that is not reflected is absorbed by the shield and exits through the other side.

PCB Shielding can be used to protect an EMI-sensitive or EMI-radiating component by enclosing it with a shield. To stop the harmful effects of EMI from affecting other circuits, a portion of a board or an entire board can be enclosed in EMI shields. In high-frequency circuits, parasitic reactance makes analogue or digital signal cables more susceptible to EMI. The reduction of EMI in cables can be achieved through the use of cable shielding.

Types of PCB Shielding

1. RF Shielding 

EMI shielding, also known as RF shielding, prevents radio frequencies and other electromagnetic radiation from propagating. The coupling of radio waves, electromagnetic fields, and electrostatic is minimised by this kind of shielding. A Faraday cage is a conductive enclosure that is used to suppress electrostatic fields.

2. Arduino Shielding

A board that can be mounted on top of the Arduino board is the EMI PCB shield. The shield's pins are inserted into the sockets on the Arduino board that run down both sides of the board. A wide variety of shields made for prototyping are available for Arduino.

 3. EMC Shielding

EMC shielding refers to any technique used to shield a signal from external electromagnetic interference (EMI) or to stop a stronger signal from escaping and interfering with nearby electronics. It can cover PCB elements such as IC chips and active components, as well as connectors and cables that connect PCBs.