China factories

China factory - Xi'an  Acme Measurement & Control Co., Ltd.

Xi'an Acme Measurement & Control Co., Ltd.

  • China
  • Active Member

Leave a Message

we will call you back quickly!

Submit Requirement
China OEM RS485 Air Compressor Pressure Transducer 4-20mA Ceramic Pressure Sensor I2C
China OEM RS485 Air Compressor Pressure Transducer 4-20mA Ceramic Pressure Sensor I2C

  1. China OEM RS485 Air Compressor Pressure Transducer 4-20mA Ceramic Pressure Sensor I2C
  2. China OEM RS485 Air Compressor Pressure Transducer 4-20mA Ceramic Pressure Sensor I2C
  3. China OEM RS485 Air Compressor Pressure Transducer 4-20mA Ceramic Pressure Sensor I2C
  4. China OEM RS485 Air Compressor Pressure Transducer 4-20mA Ceramic Pressure Sensor I2C

OEM RS485 Air Compressor Pressure Transducer 4-20mA Ceramic Pressure Sensor I2C

  1. MOQ: 1 Piece
  2. Price:
  3. Get Latest Price
Payment Terms L/C, D/A, D/P, T/T, Western Union, MoneyGram
Supply Ability 5000 pieces per month
Packaging Details Standard Carton or Wooden carton for OEM APT211 RS485 4-20mA ceramic pressure sensor i2c
Pressure Range:: -1..0-1..600 bar
Pressure type: gauge (G), absolute (A), sealed gauge (S)
Output signal: 0-5V,0.5-4.5V,0-10V,4-20mA,0-20mA
Power Supply: 12 ~ 30VDC typical value: 24VDC
Accuracy: 0.25%FS(typ.) 0.5%FS(max.)
Working Temp: -25℃~85℃
Electronic connection: Directly sealed cable
Pressure interface: M20x1.5, 1/8''NPT, 1/4''NPT, G1/4'', 7/16''-20 UNF(by Customized)
Material of pressure membrane:: 316L stainless steel
EMC Standard:: EN 61326-1; EN 61326-2-3:2013 EN 61000-6-2:2005; EN61000-6-4:2007+A1
Net Weight: 0.15KG
Brand Name ACMESENSOR
Model Number APT210
Certification CE
Place of Origin China

View Detail Information

Contact Now Ask for best deal
Get Latest Price Request a quote
  1. Product Details
  2. Company Details

Product Specification

Payment Terms L/C, D/A, D/P, T/T, Western Union, MoneyGram Supply Ability 5000 pieces per month
Packaging Details Standard Carton or Wooden carton for OEM APT211 RS485 4-20mA ceramic pressure sensor i2c Pressure Range:: -1..0-1..600 bar
Pressure type: gauge (G), absolute (A), sealed gauge (S) Output signal: 0-5V,0.5-4.5V,0-10V,4-20mA,0-20mA
Power Supply: 12 ~ 30VDC typical value: 24VDC Accuracy: 0.25%FS(typ.) 0.5%FS(max.)
Working Temp: -25℃~85℃ Electronic connection: Directly sealed cable
Pressure interface: M20x1.5, 1/8''NPT, 1/4''NPT, G1/4'', 7/16''-20 UNF(by Customized) Material of pressure membrane:: 316L stainless steel
EMC Standard:: EN 61326-1; EN 61326-2-3:2013 EN 61000-6-2:2005; EN61000-6-4:2007+A1 Net Weight: 0.15KG
Brand Name ACMESENSOR Model Number APT210
Certification CE Place of Origin China
High Light RS485 Air Compressor Pressure TransducerAir Compressor Pressure Transducer 4ma20mA ceramic pressure sensor

Product Description

 

OEM APT211 RS485 4-20mA ceramic pressure sensor i2c

APT211 pressure transmitter  series (piezoelectric pressure sensor)china pressure transmitter,Common pressure sensor applied in the engine fuel pressure, hydraulic pressure and gas pressure industries, which is adopt the Flush Ceramic piezoresistive technology and the advanced circuit design to avoid influences on the product caused by the temperature, humidity, mechanical fatigue and medium, thus to improve its permanent stability in the industrial environment.

 

Size Information

 

Electrionic Connections

OUTPUT=Signal, VCC=Power Supply, GND=VCC-&S,Sheild=Earth

Manufacture Specification

Ambient Temperature: 25°C (unless specified)

Parameter

Data

Pressure Range

-0.1...0~0.01...100MPa

Pressure type

gauge (G), absolute (A), sealed gauge (S)

Overpressure

150%FS

Burst pressure

250%FS

Electronic Wire

2 Wires

3 Wires

Output signal

4~20mA

0~5VDC

1~5VDC

0~10VDC

0.5~4.5VDC

0.5~4.5 V radio metric

Power Supply

12 ~ 30VDC, typical value: 24VDC

10~30 V DC

10~30VDC

12~30VDC

5 V DC

5 V DC±5%

Accuracy
(including: nonlinearity, repeatability, hysteresis, zero drift, full drift)

0.25%FS(typ.) 0.5%FS(max.)

Long-term stability

≤0.2%FS/year

Working Temp

−25℃~85℃

Storage Temp

−40℃~125℃

Temperature Compensation

-10℃~80℃ (Standard)

Temp.coefficient of zero

±0.1%FS/°C

Temp.coefficient of span

±0.05%FS/°C

Insulating resistance

100MΩ@250VDC

Medium compatible

Water, gas and weakly corrosive fluids

Short circuit protected

Yes

Reverse polarity protection

Yes

Electronic connection

Packard 3 Pin Connector;
Smaller Hirschman Terminal Box IP65;
Packard 3 Pin Connector with cable length by Customized.

Pressure interface

M20x1.5, 1/8’’NPT male, 1/4’’NPT male/Female, G1/4’’ male/female, 7/16’’-20 UNF male/Female (by Customized)

Material of pressure membrane

316L stainless steel

Response time(10%~90%)

≤10msec(Rises to 90%FS)

Vibration Shock

10g/5~2kHz,axes X/Y/Z/20g half sine 11ms

Water Proof

IP65

Certificate approving

CE Certificate available.

EMC Standard

EN 61326-1:2013; EN 61326-2-3:2013 EN 61000-6-2:2005; EN61000-6-4:2007+A1

Weight

Net weight is about 0.1KG, Full Packing weight is about 0.2KG (Included 2 Meters Cable)

 

 

Schematic diagram of common installation method

 

Our Services & Strength

 

1.The measuring medium must be compatible with 304 stainless steel and nitrile rubber.

2.If possible, the electrical connection of the pressure transmitter should be as vertical as possible. Measurement of dry gas pressure except indoors and in dry conditions;

3.When the pressure vessel being measured has a water or Air Hammer, a buffer valve must be installed at the front of the pressure transmitter interface.

4.When used to measure the pressure of the outlet of a pressure pump, a buffer valve or a buffer bend must be added at the front end of the pressure transmitter.

5.When a pressure transmitter is installed in the pipeline, the first step is to clean up the liquid at the threaded port and install the pressure transmitter. The second step is to slowly open the valve after installation to prevent pressure impact.

6.When a pressure transmitter is mounted on a turn pipe, it should be at least 9 times the diameter of the pipe at the turn and preferably downstream of the turn flow.

7.When a motor is present in the measuring system, ensure that the motor housing and the housing of the power supply for the pressure transmitter are at the same potential and that the resistance between the housing and the Earth does not exceed 9;

8.When there is a transducer in the measuring system, the shell of the motor controlled by the transducer should be connected to the ground wire of the power supply of the pressure transmitter.

9.When the pressure hole of the pressure transmitter is blocked, it is forbidden to use the sharp device to dredge the pressure hole. 10.The pressure transmitter should be dismounted and the part of the pressure hole should be immersed into the liquid that can dissolve the blocked material. If the user needs to calibrate zero or calibration full range should be under the guidance of our technical people, do not open the transmitter to adjust;

11.The pressure transmitter should be installed in a position that is not vulnerable to collision and trampling;

12.Transmission Cables for pressure transmitters shall not be placed in the same threading tube or in the same wiring groove as other high-voltage or high-voltage cables;

13.When installing pressure transmitters in the Dorey area, be sure to install lightning protection devices and ensure that the pressure transmitters and power supply are reliably connected to the ear;

 

FAQ

 

Q:Can you accept ODM & OEM service ?
A:We professional provide OEM &ODM service for all of items.
Q:Could I get samples?
A:Yes,we have materials in stock to help you to get the samples as soon as we can.
Q:How about the quality of the magnets?
A:We have the certification of ISO,CE and ROSH,we could send the certification test of our company to you.
Q:How is the price?
A:As we believe the quality is the most important,we will provide the best quality ultrasonic level sensor we can with reasonable
price.
Q:Could you provide me the shortest lead time?
A:We have materials in our stock,if you really need,you can tell us and we will try our best to satisfy you.
Q: How can I get my sensors?/ What's the means of transport?
A. We main delivery goods by express: DHL, FedEx, UPS,TNT, etc or logistics by indicator
Q. How to order ?
A. In order to recommend you the most suitable radar level sensors and make an accurate quotation, please provide the following information and send it to our sales when you are going to make an inquiry, thanks !
1. What is your medium? Water, oil or others?
2. Level range: 0-10meters, or others?
3. Output signal: 4-20mA, RS485 or others?

Company Details

Bronze Gleitlager

,

Bronze Sleeve Bushings

 and 

Graphite Plugged Bushings

 from Quality China Factory
  • Business Type:

    Manufacturer,Distributor/Wholesaler,Exporter,Trading Company,Seller

  • Year Established:

    2013

  • Total Annual:

    100000-1000000

  • Employee Number:

    >100

  • Ecer Certification:

    Active Member

Xi'an Acme M&C Co., Ltd. specializes in sensor production and sales. The main products includes pressure sensor and transmitter, Level transmitter ,wireless pressure sensor, wireless level transmitter, ultrasonic sensor.   We have been specializing in manufacturing pressure, l... Xi'an Acme M&C Co., Ltd. specializes in sensor production and sales. The main products includes pressure sensor and transmitter, Level transmitter ,wireless pressure sensor, wireless level transmitter, ultrasonic sensor.   We have been specializing in manufacturing pressure, l...

+ Read More

Get in touch with us

  • Reach Us
  • Xi'an Acme Measurement & Control Co., Ltd.
  • A001,6th Floor,Block A,Cross West,Fengcheng 7th Rd and Wenjing Rd,Xian 710007 P.R.China
  • https://www.pressureleveltransmitter.com/

Leave a Message, we will call you back quickly!

Email

Check your email

Phone Number

Check your phone number

Requirement Details

Your message must be between 20-3,000 characters!

Submit Requirement