JINQIU MACHINE TOOL COMPANY
| Payment Terms | L/C, T/T |
| Delivery Time | 25days |
| Packaging Details | iron pallet or wooden case |
| Charateristics | shrinking, flattening,doming ,planishing and stretching |
| name | sheet forming machine |
| drive | motor drive |
| working type | manual mode |
| application | palne,train,automobile,ship and light industy |
| material | cast iorn |
| Brand Name | wxjq |
| Model Number | CX08-350 |
| Certification | ISO9001 |
| Place of Origin | China |
View Detail Information
Explore similar products
2.5mm Sheet Metal Forming Machine R Angle CNC Corner Forming Machine With Moulds
1300X400mm Automatic Corrugated Sheet Making Machine Transformer Oil Tank
Eckold Kraftformer KF 665-460 Forming Machine With Beak Shaped Stretching Tool
1600mm Corrugated Band Former Corrugated Fin Forming Machine Transformer Tank
Product Specification
| Payment Terms | L/C, T/T | Delivery Time | 25days |
| Packaging Details | iron pallet or wooden case | Charateristics | shrinking, flattening,doming ,planishing and stretching |
| name | sheet forming machine | drive | motor drive |
| working type | manual mode | application | palne,train,automobile,ship and light industy |
| material | cast iorn | Brand Name | wxjq |
| Model Number | CX08-350 | Certification | ISO9001 |
| Place of Origin | China | ||
| High Light | Shrinker Stretcher Sheet forming Machine ，Electric Sheet forming Machine ，Power Hammer Sheet forming Machine | ||
Electric Kraftfomer 350 Sheet forming Machine Power Hammer Shrinker Stretcher
KRaftformer 350 Introduction :
The Kraftformer 350 is part of the medium-force Kraftformer range with motor drive.
Depending on the workpiece to be machined, the operator can adjust the number of working strokes to any value between 220 and 600 strokes per minute continuously. Low speeds are particularly suitable for shrinking, stretching and for straightening and precision finishing. Thanks to the high stroke rate, the machine is also widely used for doming (dishing) and planishing, boosting productivity. This Kraftformer is capable of machining steel sheets of up to 3 mm in thickness!
For our Kraftformers, we offer a wide range of tools (tools are not included in the scope of delivery of this machine).
Max. forming capacity
Steel 400 N/mm²: 3.0 mm
Aluminium 250 N/mm²: 4.0 mm
Inox 600 N/mm²: 2.0 mm
Summary:
Shrinking and stretching are indispensable operations in aircraft manufacturing, mainly
for correcting and adjusting of pressed parts of all sorts. The special machines and tooling
offer a highly efficient solution to assure precise fitting together of the individual parts.
Usage:
the sheet forming machine changes the traditional style of sheet forming by
manaually.reduce labour intensity and increase the productivity. it is widely
used to making palne. train.automobile,ship,electronic,light industry and etc.
it solved the technology that general dies are substituted for special dies.
Service And Maintenance:
The machine is of simple structure and does not require special maintenance.
However in order to prolong its working life please pay attention to the following item:
Lubricate all relevant points of the machine as per requirement of the lubrication
information plate, see figure below.
When stopping the machine be sure to push the selector button to “adjust” position,
step on foot switch S2 to lift the plunger for 1—2 seconds and then stop and switch
off power.
Before starting the machine be sure to clean up the work piece surfaces without
leaving a single spot of grease so as to make it easy for the shaping and prolong
the working life of dies.
Often check on the tension of the belt. If the machine is to lay idle for long period
of time the belt is to be loosened. Be sure to change belt in good time when it is
found damaged.
Emergency switch is not for stopping the machine in normal conditions. Do not use
it unless in emergency.
Technical Paramter:
| Throat depth | 350mm | |
| Opening height between the connecting face of the upper and lower dies | 160～ 198 mm
| |
| Stroke of plunger | 8 mm | |
| Plunger in feed adjustment | 30 mm | |
| Plunger punching frequency | 0～ 400 timeses/ min | |
| Max thickness of sheet the machine is capable of forming | ||
| Steel sheet ((s= 400 MPa) | 2 mm | |
| Aluminum sheet((s= 250 MPa) | 2.5 mm | |
| Copper sheet((s= 250 MPa) | 2 mm | |
| Stainless steel sheet ((s= 600 MPa) | 1 mm | |
| Main motor | type | capacity |
| QA90L4A,B5 | 1.5 kw | |
| In-Feeding motor | type | capacity |
| 5RK90A-SM | 90 w | |
| Machine weight | Net weight | Gross weight |
| 500 kg | 600 kg | |
| Overall dimensions (L×W×H) | 1720×1040×1666 | |
| Power supply | 3～380V 50 Hz | |
Warranty And Service:
one year warranty for whole press.
all spare parts are available as we produce most of the parts in our factory.
it is easy to get the electric parts as all are international famous brands.
we can provide technical support via email, phone or video.
we can send out engineers for service, installation or training with reasonable additional cost.
English operation and maintenance manual is provided with the press.
All safety warning tags and control panels are in English
Machine Photo:
Company Details
Business Type:
Manufacturer,Exporter,Trading Company
Year Established:
1969
Total Annual:
500-800
Employee Number:
250~300
Ecer Certification：
Verified Supplier
WUXI JINQIU MACHINERY CO.,LTD was founded in June 1969. it is located in No.99Qianluo road Qianqiao town Huishan district Wuxi city. It is at Wuxi Vocation park. It mainly produces hydraulic press brake, hydraulic shear, CNC sheet V grooving machine, allotype surface quick forming machine, CN... WUXI JINQIU MACHINERY CO.,LTD was founded in June 1969. it is located in No.99Qianluo road Qianqiao town Huishan district Wuxi city. It is at Wuxi Vocation park. It mainly produces hydraulic press brake, hydraulic shear, CNC sheet V grooving machine, allotype surface quick forming machine, CN...
Get in touch with us
Leave a Message, we will call you back quickly!