Chengdu Helical Line Products Co., Ltd.
| Payment Terms | T/T, L/C |
| Supply Ability | 100000 sets per month |
| Delivery Time | 10-20 days |
| Packaging Details | Carton pallets,wooden cases, or as required by customer |
| Material | galvanized steel , aluminum clad steel |
| Product length | 1400/1000mm |
| Grip strenth | not less than 95% RTS of OPGW |
| Helical direction | right hand is standard |
| Sandard | GB,or according to customer requirement |
| Customized products | yes |
| Brand Name | HLLP |
| Model Number | ONY 0000 |
| Place of Origin | CHENGDU CHINA |
View Detail Information
Explore similar products
ISO9001 Armor Rods Electrical 25mm2 Preformed Guy Grip
Terminal Poles Color Code ACSR 9/16" Preformed Grips
Plastic Jacketed Conductor 3.65mm DN1118 Preformed Dead End
Preformed Helical Fiiting 1/4" OPGW Guy Wire Dead End Grips
Product Specification
| Payment Terms | T/T, L/C | Supply Ability | 100000 sets per month |
| Delivery Time | 10-20 days | Packaging Details | Carton pallets,wooden cases, or as required by customer |
| Material | galvanized steel , aluminum clad steel | Product length | 1400/1000mm |
| Grip strenth | not less than 95% RTS of OPGW | Helical direction | right hand is standard |
| Sandard | GB,or according to customer requirement | Customized products | yes |
| Brand Name | HLLP | Model Number | ONY 0000 |
| Place of Origin | CHENGDU CHINA | ||
| High Light | OPGW Preformed Dead End ，Helical 95% OPGW Dead End ，ONY0780 Preformed Dead End | ||
Preformed dead end for OPGW
Preformed dead end for OPGW is made of aluminum-clad steel wire or galvanized steel wire,It is designed as two layers structure consisting of structural reinforcing rods and dead end component to terminate Optical Ground Wire (OPGW) .The product grips the OPGW cable to prevent damaging the strand or internal optical fibers, and the holding strenth is not less than 95%RTS of the OPGW cable.The ground wire with compression terminal can be provided.During installation,care should be taken to ensure a successful installation .This product is intended for use by trained crafts people only.
| Model | Range of Dia. of Cable | Length of Reinforcing Rods (mm) | Length of Outer Rods (mm) | Weight(kg) | Broken Strength(KN) | |
| Minimum(mm) | Maximum(mm) | |||||
| ONY 0780 | 7.2 | 7.8 | 1400 | 1000 | 1.1 | 70 |
| ONY 0880 | 7.9 | 8.8 | 1400 | 1000 | 1.15 | 70 |
| ONY 1010 | 8.9 | 10.1 | 1400 | 1000 | 1.28 | 70 |
| ONY 1140 | 10.2 | 11.4 | 1540 | 1120 | 1.7 | 90 |
| ONY 1280 | 11.5 | 12.8 | 1620 | 1200 | 2.41 | 112 |
| ONY 1410 | 12.9 | 14.1 | 1660 | 1240 | 2.55 | 112 |
| ONY 1550 | 14.2 | 15.5 | 1840 | 1360 | 2.89 | 112 |
| ONY 1730 | 15.6 | 17.3 | 2000 | 1480 | 3.61 | 112 |
| ONY 1920 | 17.4 | 19.2 | 2400 | 1800 | 4.68 | 112 |
| ONY 2110 | 19.3 | 21.1 | 2600 | 2000 | 5.14 | 112 |
Products can be customized according to customer requirements.
What is preformed rod?
Preformed rod is made of high strenth wire.The usual materials are galvanized steel wire,aluminum-clad steel wire,aluminum-allovy wire.
The high strenth wire through a moid molding,made of a certain length of the screw,like ordinary spring,The screw pitch is the pressure spring dozens of times,the screw inner diameter is less than the diameter of strand or conductor.Because of the elasticity of the high strenth screw wire,when it is installed and wound on the strand,the screw wire produces a grip force on the strand.This made of screw wire we call it preformed rod.The parameters include :out diameter of wire,pitch,lenth,rod diameter and helical direction.
what is preformed dead end?
In order to increase the grip foce of the preformed rod on the strand or conductor,several preformed rods glued together according to the need,and the part in contact with the strand is gritted.
A certain length in middle of the glued preformed rod need to be wrung to facilitity the installation of the thimble clevis,based on the center of the wrung segment,the preformed rod is folded in half according to the required radius to form twe legs.The product that makes after such craft processing is called preformed dead end.
Preformed dead end is widely used in power transmission and distribution lines.Its main function is to tighten the conductor and install it on the terminal tower.It bear the line operating tension and other additional loads.For various categories of conductor,strand,or optical cable etc,different occasion,to desigh different categories of preformed dead end production.Because of its special structure,compared with the traditional bolt or compression tension clamp,has excellent product performance:
1,The stress of clamped conductor is evenly distributed along the wrapping conductor segment to ensure the grip forth on the conductor and avoid the damage to the conductor caused by stress concentration.
2,The clamp stracture installed on the conductor can enhance the vibration resistance of the conductor and extend the service life of the conductor.
3,Installation is convenient,the construction personnel only needs to ensure that the clamp is evenly wound around the conductor,without any tools,installation quality is easy to ensure.
Company Details
Business Type:
Manufacturer,Exporter,Seller
Year Established:
2009
Total Annual:
500000-1500000
Employee Number:
100~150
Ecer Certification：
Verified Supplier
Chengdu Helical Line Products Co., Ltd. is a professional manufacturer and sales of preformed line products since 2009,located in CHENGDU City,CHINA.Although our company is a small-scale manufacturing enterprise,but we are good at producing preformed dead ends. &... Chengdu Helical Line Products Co., Ltd. is a professional manufacturer and sales of preformed line products since 2009,located in CHENGDU City,CHINA.Although our company is a small-scale manufacturing enterprise,but we are good at producing preformed dead ends. &...
Get in touch with us
Leave a Message, we will call you back quickly!