Payment Terms | T/T |
Supply Ability | 3000 tons/month |
Delivery Time | 45 days |
Packaging Details | Bundles Package, Wooden Box Package |
Product Name | Steel tubes for automotive application |
Delivery Condition | without heat-treatment |
OD Size | 6-114mm |
WT Size | 1-20mm |
Steel Material | 10, 20, 35, 45 |
Process | Cold rolled |
Application | For automotive application |
Section shape | Round |
Brand Name | New Era |
Model Number | TY 14-161-200-2002 |
Certification | ISO9001 |
Place of Origin | China |
View Detail Information
Explore similar products
Black Phosphating Cold Rolled Steel Tube Bending For Manipulator / Steering Gear
High Pressure Boiler Cold Rolled Steel Tube With Clean Surface SA192 Model
Mechanical / Structural Steel Pipe , 1010 / 1020 Galvanized Steel Pipe
E255 / St45 / 1020 Bright Annealed Cold Rolled Steel Tube
Product Specification
Payment Terms | T/T | Supply Ability | 3000 tons/month |
Delivery Time | 45 days | Packaging Details | Bundles Package, Wooden Box Package |
Product Name | Steel tubes for automotive application | Delivery Condition | without heat-treatment |
OD Size | 6-114mm | WT Size | 1-20mm |
Steel Material | 10, 20, 35, 45 | Process | Cold rolled |
Application | For automotive application | Section shape | Round |
Brand Name | New Era | Model Number | TY 14-161-200-2002 |
Certification | ISO9001 | Place of Origin | China |
High Light | roll bar steel tubing ,cold rolled seamless tube |
TY 14-161-200-2002 Seamless cold rolled Steel Tube used for automotive parts
Material: Steel 10, 20, 35, 45
Size Range: OD: 6-114mm, WT: 1-20mm, Length: 5.8m/6m, maximal 12meters
Pipes are made of billet according to GOST 14-21, TY 14-1-1076 or to other regulations.
Example of symbolic notation record:
Pipe of internal diameter 51 mm, wall thickness 2 mm, fixed 4000 mm, steel grade 10, with heat-treatment according to TY 14-161-200-2002.
Pipe ID51x2x4000 steel 10 – heat treatment acc. TY 14-161-200-2002
Pipe outer diameter 26 mm, wall thickness 3 mm, random length, steel 10 without heat treatment according to TY 14-161-200-2002
Pipe 26x3x2, 5-5.0 steel 10 without heat treatment acc. TY 14-161-200-2002
2. Technical requirements
2.1 Pipes are made from carbon steel grade 10 by GOST 1050 with decreased content of sulfur - - not more than 0,035%, phosphorus - not more than 0,035% and total content of sulfur and phosphorus not more than 0,060%.
Deviations in other components of chemical composition are by GOST 1050.
It’s allowed to manufacture pipes from steel with content of sulfur and phosphorus by GOST 1050 by agreement with a customer.
2.2 Mechanical characteristics of pipes should comply with requirements, indicated in Table 3.
Table 3
Condition of material | Tensile strength N/mm2 (kgs/mm2) | Yield strength N/mm2 (kgs/mm2) | Elongation, 5 % | Hardness, HRE | |
Not less | |||||
Cold-deformed pipes without heat treatment | 471-687 (48-70) | 412 (42) | 5 | 75-100 | |
Cold-deformed pipes with heat treatment | 343-490 (35 50) | 206 (21) | 30 | 55-80 | |
Note: 1. Ultimate resistance for pipes with dimensions 36x2, 39x3,5 mm – 343(35)-441(45) N/mm2 (kgs/mm2).
2. Hardness of pipes with wall thickness 0,75 mm is not controlled.
3. Hardness of pipe’s metal with wall thickness 1,0 mm is measured on internal surface.
4. Control of hardness is not obligatory on condition that there is warranty from pipe’s factory of origin.
2.3 On the surface of the pipes cracks, film, flaws, blisters, sealing, exfoliated oxidized film and rust are not allowed.
Separate small dents, risks, traces of defects cleaning are allowed if they don’t lead the dimensions of pipes out of the limitations of negative allowed deviations.
Presence of non-exfoliated oxidized film or change of surface color, which is the result of heat treatment, can’t be considered a defect.
2.4 Ends of pipes should be cut off at right angles and cleaned from burrs on external and internal surfaces.
2.5 Pipes, which work under pressure (which should be stipulated in the order) should endure hydraulic pressure test not less than:
- with heat treatment 1,5 MPa (15 kgs/cm2)
- without heat treatment 2,0 MPa (20 kgs/cm2)
Factory of origin is allowed to guarantee ability of pipes to endure hydraulic pressure without procedure of tests.
2.6 Pipes, which have been subject to heat treatment, are put to test of dispensation of conic mandrel with angle of 60 degrees till internal diameters of pipes with dimensions 36x2, 39x3,5 will increase for 30 %, and other dimensions – on 25 %.
Pipes with dimensions 5x0,75, 9x1,0; 8x internal 4; 21x internal14, 21xext.16,5 are not put to test of dispensation.
Quality Control:
1. Incoming Raw Material Inspection
2. Raw Material Segregation to avoid steel grade mix-up
3. Heating and Hammering End for Cold Drawing
4. Cold Drawing or Cold Rolling, On line inspection
5. Heat Treatment
6. Straightening/Cutting to specified length/Finished Measuring Inspection
7. Quality Testing in own lab with Tensile Strength, Yield Strength, Elongation, Hardness, Straightness, etc.
8. Packing and Stocking.
100% Eddy Current Testing.
100% Size Tolerance Checking.
100% Tube surface checking to avoid surface defects.
FAQ:
1. Can you provide a sample to check the quality?
We can provide free sample with same or similar sizes for you to check tube quality.
You need to in charge of Express costs.
2. How about your production capacity?
3000 tons/Month.
3. What are your terms of payment?
30%TT in advance, Balance to be paid before shipment.
4. Where is your factory?
Jiaxing city, 2 hours away from Shanghai.
5. How can I get the quotation A.S.A.P?
Please send us an inquiry with full details as following,quotation will sent to you A.S.A.P:
1). Tube Standard
2). Steel Grade
3). Tube Size and Size Tolerance
4). Tube length
5). Quantity
6). If any special requirements
6. How about the minimum order quantity?
Normally for one size above 1 ton.
Welcome to contact us! Thanks.
Company Details
Business Type:
Manufacturer
Year Established:
1988
Total Annual:
100000000-15000000
Employee Number:
150~200
Ecer Certification:
Verified Supplier
Zhejiang New Era Steel Tube Technology Co., Ltd is one of the best seamless steel tube products manufacturer and exporter in china. Our main products include cold drawn and cold rolled seamless steel tubes .We can manufacture non-standard and special application tubes, also according to the int... Zhejiang New Era Steel Tube Technology Co., Ltd is one of the best seamless steel tube products manufacturer and exporter in china. Our main products include cold drawn and cold rolled seamless steel tubes .We can manufacture non-standard and special application tubes, also according to the int...
Get in touch with us
Leave a Message, we will call you back quickly!