Zhejiang THOR Electric Co., Ltd
| Payment Terms | L/C, T/T, Western Union, MoneyGram |
| Supply Ability | 20000 pieces/month |
| Delivery Time | 3-7 work day |
| Packaging Details | Carton packaging |
| Product name | Surge protective device |
| UC | 275V |
| IN | 40KA |
| IMAX | 80KA |
| Surge protective device | IEC/EN 61643-11 |
| Certificate | CE |
| Warranty | 2 Years |
| OEM/ODM | YES |
| Brand Name | THOR |
| Model Number | TRS9-B80 |
| Certification | CE |
| Place of Origin | CHINA |
View Detail Information
Explore similar products
Domestic Type 2 Surge Protection Device High Performance Chips React Quickly
Whole house surge protector 80KA voltage surge suppressor power lightning
Multi Functional Type 2 Surge Protection Device Single Phase Indoor Mounted
Low Residual Electrical Surge Arrester , 275V 20KA Type 2 3 Phase Surge
Product Specification
| Payment Terms | L/C, T/T, Western Union, MoneyGram | Supply Ability | 20000 pieces/month |
| Delivery Time | 3-7 work day | Packaging Details | Carton packaging |
| Product name | Surge protective device | UC | 275V |
| IN | 40KA | IMAX | 80KA |
| Surge protective device | IEC/EN 61643-11 | Certificate | CE |
| Warranty | 2 Years | OEM/ODM | YES |
| Brand Name | THOR | Model Number | TRS9-B80 |
| Certification | CE | Place of Origin | CHINA |
| High Light | type 2 surge protector ，type 2 surge arrester | ||
Power surge protector can appliance or device designed to protect electrical devices from voltage spikes
Brief introduction
Surge protector is an electronic device that provides security protection for all kinds of electronic devices, instruments and communication lines. When the peak current or voltage is suddenly produced in the electrical circuit or communication line because of the external interference, the surge protector can guide the shunt in very short time, thus avoiding the damage of the surge to other equipment in the circuit.
Product specification
| Model | TRS9-B80 | TRS9-B100 | TRS9-B120 | TRS9-150 | |
| Rated Operating Voitage | UC | 275 | 275 | 275 | 275 |
| Voltage protective level | Up(KV)≤ | 1.7 | 2.1 | 2.35 | 2.8 |
| Max discharge current | Imax(8/20μS) | 80 | 100 | 120 | 150 |
|
Nominal discharge current
|
In(8/20μS) | 40 | 60 | 80 | 100 |
| Ressponse time | NS | <25 | |||
| Lndication of invalidation | Aging invalidation:green Normal,red:Invaldation | ||||
| Operating condition | Temp:-40℃~+70℃ | ||||
| RH≤95%(25℃) | |||||
| Sea level elevation≤3km | |||||
|
Remote signal function
|
Can also picking | ||||
| Remarks | Other max continuous operating voltage can be customized | ||||
Product features
1. multi-functional overvoltage protection, lightning and overpressure are no longer afraid of disasters.
2. using the latest arc extinguishing technology to avoid fire completely
3. leakage current is small, the response time is fast, and the residual pressure is low
4. copper fittings have good electrical conductivity
Notice of product
1. surge protector is installed with 35MM standard guide rail
2. generally speaking, it is better to separate the protected conductor from the non protected conductor, and it should be separated from the ground wire. At the same time, in order to avoid transient orthogonal coupling between power cables and communication cables, necessary measurements should be made.
3. identify the input / output interface identifier of the lightning protector, input the external line and output the connection device.
4. it should match the working voltage of the protected equipment. Please install according to the installation sketch.
Working principle of product
The lightning arrester can effectively protect the power equipment. Once the abnormal voltage appears, the lightning arrester will play a protective role. When the protected device is running under normal working voltage, the arrester will not work, and it will be regarded as a circuit for the ground. Once the high voltage is present and the insulation of the protected equipment is endangered, the lightning arrester acts immediately and leads the high voltage impact current to the earth, thus limiting the amplitude of the voltage and protecting the insulation of the electrical equipment. When the overvoltage is gone, the arrester is restored to its original state quickly, so that the system can supply electricity normally. The main function of the lightning arrester is to reduce the voltage value of the protected equipment through the action of parallel discharge gap or nonlinear resistance, and to reduce the voltage value of the protected equipment, so as to protect the power equipment.
Company profile
Thor is all about protecting against the damaging effects of power transients. It is our goal and mission to connect our customer challenges with high-quality, right-priced solutions and products – completed by unrivaled customer service and technical support.
Company Details
Business Type:
Manufacturer,Exporter,Trading Company
Year Established:
2006
Total Annual:
100-150
Employee Number:
300~500
Ecer Certification：
Active Member
Thor is all about protecting against the damaging effects of power transients. It is our goal and mission to connect our customer challenges with high-quality, right-priced solutions and products – completed by unrivaled customer service and technical support. Incorporated in 2006, Zhejiang... Thor is all about protecting against the damaging effects of power transients. It is our goal and mission to connect our customer challenges with high-quality, right-priced solutions and products – completed by unrivaled customer service and technical support. Incorporated in 2006, Zhejiang...
Get in touch with us
Leave a Message, we will call you back quickly!