Universal Network Inline Ethernet Surge Protector , Ethernet Surge Protector Poe

Product Specification

Universal Network Surge Protector Anti-jamming Universal Network Camera

Model:Trss-rj11 / 45

colour:white

Authentication:CE ECM

Product description

    The TRSS-RJ45/8 type network lightning arrester is used on the RJ45 interface of the LPZ2- LPZ3 partition interface to protect Ethernet computers, servers, switches, routers and other network devices. The network surge protector is suitable for lightning strikes or other surge protection of network devices such as SWITCH, HUB, ROUTER and computers of six types of wiring systems. It has the characteristics of large flow capacity, low residual pressure level, sensitive reaction, stable performance and reliable operation.
    It is designed and manufactured according to the standard of IEC and GB, and meets the requirements of IEEE802.3AT. It is suitable for the power supply of the communication equipment such as the server of the POE network wire, the wireless AP, the network camera, the network switch and so on. The integrated integrated design and the installation are convenient.

Product specification

Working principle of product

   During the operation of the equipment, the lightning arrester will play a protective role once the abnormal voltage occurs. When the protected device is running under normal working voltage, the arrester will not work, and it will be regarded as a circuit for the ground. Once the high voltage is present and the insulation of the protected equipment is endangered, the lightning arrester acts immediately and leads the high voltage impact current to the earth, thus limiting the amplitude of the voltage and protecting the insulation of the electrical equipment. When the overvoltage is gone, the arrester is restored to its original state quickly, so that the system can supply electricity normally. The main function of the lightning arrester is to reduce the voltage value of the protected equipment through the action of parallel discharge gap or nonlinear resistance, and to reduce the voltage value of the protected equipment, so as to protect the power equipment.

Use of attention

   1. standard RJ45 interface can be conveniently connected to the front end of the protected equipment. The grounding path should be as short as possible, and the length should not exceed 1.5 meters.

  2. after correct installation, it can work steadily for a long time. If it is found that the transmission performance of the system is reduced or the signal is interrupted due to the cause of surge protection, it should be maintained or replaced in time.

  3. the grounding of the signal protector should be connected to the grounding grid through the electronic switch.

  4. lightning protector is between the protected device and the signal channel.

Product features

  1. multi-functional overvoltage protection, lightning and overpressure are no longer afraid of disasters.

  2. transmission performance, excellent insertion loss, high transmission frequency and low attenuation coefficient, ensure that the lightning arrester does not affect the system performance.

  3. installation and use of convenient novice can also be easy to install

 
  4. strict product structure, meticulous and comprehensive protection

Company profile

   Zhejiang Thor Electric Co is following the international quality system standards, is ISO 9001 certified and our technical standards are in line with GB18802.1-2011/IEC1643-1.
   Ltd is committed to meeting the requirements of the European Union’s Waste Electrical and Electronic Equipment (WEEE) directive. This directive requires producers of electrical and electronic equipment to finance the take-back for re-use or recycling of their products placed on the EU market after 2005