Beijing Tianyihongda Science & Technology Development Co., LTD
| Payment Terms | L/C, T/T, Western Union |
| Supply Ability | 3000 sets/month |
| Delivery Time | within 3-5 days |
| Packaging Details | standard export package |
| Power of solar panel | 12W/10V |
| MTBF | ＞5×104 h |
| Circuit load current | 0~630A |
| Dimension of repeater station | H×W×T=388mm×366mm×368mm |
| Brand Name | TYHD |
| Model Number | TYHD-AI9 |
| Certification | type test report |
| Place of Origin | Beijing , China |
View Detail Information
Explore similar products
7 - 69KV Cable Fault Indicator , Wireless Power Supply Failure Indicator
Remote Transmission Fault Path Indicator H × W × T= 388mm × 366mm × 368mm Size
Anti Rust Precision Approach Path Indicator For Fault Path 12W / 10V Solar Panel
Short Circuit Earth Fault Path Indicator Detection System Device For Overhead
Product Specification
| Payment Terms | L/C, T/T, Western Union | Supply Ability | 3000 sets/month |
| Delivery Time | within 3-5 days | Packaging Details | standard export package |
| Power of solar panel | 12W/10V | MTBF | ＞5×104 h |
| Circuit load current | 0~630A | Dimension of repeater station | H×W×T=388mm×366mm×368mm |
| Brand Name | TYHD | Model Number | TYHD-AI9 |
| Certification | type test report | Place of Origin | Beijing , China |
| High Light | power supply failure indicator ，precision approach path indicator | ||
Safety criterion
Welcome to use remote transmission unit manufactured by us. Each remote terminal uint has already experienced the complete assembly, test and inspection, also the careful check and adjustment before delivery, which has been in good condition when transport. When received, the repeater station shall be carefully checked for damage during transport, and in case of any problem, the carrier shall be reported immediately in written.
Working principle
Remote terminal uint is to receive the circuit fault information and circuit load operation information from overhead indicator installed in the circuit via wireless for analysis and compiling and then sends the information to main distribution network station via GPRS/GSM communications, to realize the online monitoring, fault detection and positioning functions of distribution network.
Main features
1.GSM or GPRS forwarding
GSM (short messages) and GPRS (data) are mutually the standby mode, which are used to send the substation condition, circuit load current, indicator status and fault information to main distribution network station, to ensure the reliable transmitting of distribution network fault information.
2 Remote upgrade
The equipment program can be upgraded conveniently through master remote maintenance station.
3 Work mode setting
The terminal can be in the two-remote or one-remote working mode by setting the intrinsic parameters of remote terminal uint.
Two-remote working mode: the terminal is online in real time, and the circuit load current and circuit status can be uploaded.
One-remote working mode: the terminal is online regularly; when the circuit breaks down, the terminal opens GPRS module power supply and sends the fault information to main distribution network station.
| Environment temperature | -35℃～70℃ |
| Humidity | 5～95%RH |
| Altitude | ＜2000m |
| Voltage grade | 7～69kV |
| Frequency | 50 Hz |
| Total indicating time | >2000 hours |
| Cable diameter range | 5～40mm |
| Long time withstand current | 630A |
| Weight | ≤500g |
| Size | Ф75(MAX)×115mm |
installation
a) By fitting the bracket installed in the hot sticks, screw detaching sheet nut to let the sheet fully retracted into the interior of the column (ie: try to tighten the sides, leaving enough space so as not to block the indicator when installing).
b)put the indicator into the bracket , and make the spring device to hook with the indicator spring, and rotate the spring device down firmly until after the indicator spring pulled position retractor can hook, then hook the spring with retractor and pull t he spring device out. And use the same method to the other side of the same end of the indicator spring to hook retractors.
c) Aligning the overhead lines pushed up and under the pressure of the overhead lines the indicator springs are divorced from the retractor spring and stucked overhead lines firmly.
Company Details
Business Type:
Manufacturer,Exporter,Seller
Year Established:
2014
Total Annual:
3000000-5000000
Employee Number:
150~180
Ecer Certification：
Site Member
Beijing TIANYIHONGDA Science & Technology Development Co., LTD is located in Lize Business Circle area, a prosperous business area in the center of Beijing City, China. is a high and advanced technology enterprise which is professionally engaged in research, production, sales and service of adva... Beijing TIANYIHONGDA Science & Technology Development Co., LTD is located in Lize Business Circle area, a prosperous business area in the center of Beijing City, China. is a high and advanced technology enterprise which is professionally engaged in research, production, sales and service of adva...
Get in touch with us
Leave a Message, we will call you back quickly!