24V 200AH Prismatic Lithium Electric Forklift Battery Pack

Product Specification

Powerful Prismatic Lithium Batteries , 24V 200AH Battery Forklift Truck

1. Description 

 This specification defines the performance of rechargeable LiFePO4 battery pack describes the type, performance, technical characteristics, warning and caution of the battery pack.

Specification

Note:

If above parameters not meet your requirement, please contact us, we could make customized LiFePO4 battery pack for you according to your requirement of battery pack size, continuous discharge current, peak discharge current.

Features

- Metal housing design is fiexible
- Long life span
- LCD smart monitor
- Automatic warnning alarm
- Environmental friendly

Electrical Characteristics & Test Condition

Testing Conditions: Ambient Temperature: 25±5℃; Huminity:45%~75%.

Test Conditions

3.1 Standard Test Conditions

3.1.1 Unless otherwise specified, all performance tests is required conducted at temperature 25℃±2℃, Humidity less than 45%~75%RH.

3.1.3 Unless otherwise specified, the tested product is required unused within two month after outgoing.

3.2 Standard Charge Mode

"Standard Charge" means at 25±2℃ charge to limit voltage with 0.33C constant current, then charge with constant voltage until current less than 0.02ItA.

3.3 Quick Charge Mode

" Quick Charge" means at 25±2℃ charge to limit voltage with 0.5 C constant current, then charge with constant voltage until current less than 0.02ItA.

3.4 Standard Discharge Mode

"Standard Discharge" means at 25±2℃ discharge to the cut-off voltage with 0.33C current.

3.5 Quick Discharge Mode

"Quick Discharge" means discharge to the cut-off voltage with 0.5C current.

3.2 Battery Pack Safety Test

Applications for Lifepo4 lithium iron phosphate battery:

· Energy Storage Systems (ESS)

· Remote area power systems

· Communications systems

· Electric vehicles

· Marine environments

· Military & Aviation

· Electric rickshaw

· Uninterruptible Power Supplies

· CCTV & Data Transfer

Advantage 

Longer Cycle Life: Offers up to 20 times longer cycle life and five times longer float/calendar life than lead acid battery, helping to minimize replacement cost and reduce total cost of ownership.
Lighter Weight: About 40% of the weight of a comparable lead acid battery. A ‘drop in’ replacement for lead acid batteries.
Higher Power: Delivers twice power of lead acid battery, even high discharge rate, while maintaining high energy capacity.
Wider Temperature Range: -20 C~60 C.
Superior Safety: Lithium Iron Phosphate chemistry eliminates
Increased Flexibility: Modular design enables deployment of up to four batteries in series and up to ten batteries in parallel.

Products  Parts 

Certification:

We have passed the MSDS , CE , ROHS , UL , IEC62133 certifications 

Protective circuit specification

The batteries are supplied with a LiFePO4 Battery Management System (BMS)that can monitor and optimized each single prismatic cell during charge & discharge, to protect the battery pack overcharge, over discharge, short circuit. Overall, the BMS helps to ensure safe and accurate running.

Warning & Tips

Please read and follow the specification and caution remarks on battery surface before use the battery. Improper use may cause heat, fire, rupture, damage or capacity deterioration of the battery. Shenzhen Topband Battery Co., Ltd. Describes is not responsible for any accidents caused by the usage without following our specification.

² The battery must be far away from heat source, high voltage, and avoid to be exposed in sunshine for long time.

² Never throw the battery into water.

² Do not put the battery in a charger or equipment with wrong terminals connected.

² Never connect the positive and negative of battery with metal.

² Avoid excessive physical shock or vibration. don't hit, fall, stamp on the battery

² Without the permission of the manufacturer and guidance, forbidden to remove or to assemble the battery

² Do not use the battery mixed with other different manufacturer, type, or model batteries.

² Keep the battery against high temperature. Otherwise it will cause battery heat, get into fire or lose some function and reduce the life.

² When battery run out of power, please charge your battery timely (≤15day).

² Please use the matched or suggested charger for this battery.

• Based on the character of cell, proper environment for transportation of LiFePO4 battery pack need to be created to protect the battery.
• Battery should be stayed in the ware house -20℃～35℃ where it’s dry, clean, shade, and well-ventilated.
• The battery should be stored in 50% SOC during transportation.
• The battery need to be charged every 6 months if out of use.

   Packing and shipping

Why Choose us?

Reliable quality -- We have 10 years of battery industry experience. Automated production line and precise equipment. In strict accordance with international standards

for production inspection, to ensure product quality and safety.

Positive service -- We give response for all inquiries/questions in 24 hours. We have a professional R&D team, we can provide professional customized and one-stop services.

Taking responsibility -- PAC members to proactively take responsibility, we always offer the best solution to our customers.

Lithium battery cell manufacturing, prismatic shape and other special shap battery, curved battery.

Cylindrical Li ion battery cell manufacturing, 18650, 26650, 14500, 32650, 32700
Battery management system (BMS) design, PCM, PCB, production is done in-house
Plastic tooling, injection is done in-house
Battery packing is done in-house

24 hours customer service, waiting for your inquiry!