Packaging Film Automated Bagging Systems Six Liquid Raw Materials

Product Specification

Packaging Film Automatic Batching System Automatic Weighing Control For Six Liquid Raw Materials

Production introduction:

Raw material addition:

Before the system starts the automatic weighing control, the six liquid raw materials should be selected according to the formula ratio of the corresponding product name (the quantitative value difference is stored), and the delivery hose should be placed in the original barrel and reinforced and placed off. The control program is started and the work starts !

Material delivery

The design of the delivery pump and the added value of the six liquids are controlled by the DC system as a whole.

Our company designs liquid materials to be transported through pipelines, pumped directly into the metering hopper, directly controlled according to the logic sequence of the formula, and embedded in the advance amount program to ensure the accuracy of the batching, and the design measurement accuracy is 0.2-0.5.

When the system batching is completed, the indicator light will display with a green light to indicate that the batching is completed and waiting for the next batching instruction. In case of insufficient raw materials in the interval, an automatic alarm will be issued to remind the operator to replace the raw material barrel, and the original batching procedure will continue to be executed.

When the ingredients are finished, you can manually select the raw materials of each tank to be sent to the corresponding reaction tank! The operation mode is semi-automatic. When there is no instruction, the system will send all the raw materials in the currently selected stun tank to the reaction tank. The interval can be operated.

The operator manually stops and starts!

DCS control system

DCS integrated touch screen operation unit, working status is clear at a glance, and can be automatically switched by hand, and can be maintained in the future

Select manual mode to quickly eliminate, and at the same time, multiple sets of formulas are selectively produced, and the formula values ​​will be kept secret and displayed through product codes. The set value can be set directly on the touch screen without special program setting, and the fault alarm device is embedded

Make the system malfunction, and also can manually complete the ingredients

DCS control system:

DCS integrated touch screen operation unit, working status is clear at a glance, and can be automatically switched by hand, and can be maintained in the future

Select manual mode to quickly eliminate, and at the same time, multiple sets of formulas are selectively produced, and the formula values ​​will be kept secret and displayed through product codes. The set value can be set directly on the touch screen without special program setting, and the fault alarm device is embedded

Make the system malfunction, and also can manually complete the ingredients