Changzhou Powace Internation Co., Ltd.
| Payment Terms | T/T, Western Union,Paypal |
| Supply Ability | 5000 |
| Delivery Time | 2-7 work days |
| Packaging Details | Independent anti-collision foam+outer box packaging for each product |
| Protection Level | IP65 |
| Encoder Resolution | 1000 PPR |
| Driver | 24V-48VDC |
| Operating Temperature | -20°C to 50°C |
| Control Mode | Closed Loop |
| Rated Current | 6.0A |
| Encoder line number | 1000 |
| Insulation resistance | >=500MΩ |
| Brand Name | Rattm Motor |
| Model Number | 2N Kit |
| Certification | CE CCC |
| Place of Origin | China |
View Detail Information
Explore similar products
Nema 34 Closed Loop Stepper Motor Kit 116mm 2HSS86 For CNC Controller Milling
2N.M Nema23 Closed Loop Servo Motor 76mm HSS57 For CNC Controller Kit
Closed Loop Nema24 Stepper Motor 88mm For CNC Controller Router Milling Kit
12N.M Nema34 Closed Loop Servo Stepper Motor 154mm 6.0A 1700OZ-IN With 2HSS86
Product Specification
| Payment Terms | T/T, Western Union,Paypal | Supply Ability | 5000 |
| Delivery Time | 2-7 work days | Packaging Details | Independent anti-collision foam+outer box packaging for each product |
| Protection Level | IP65 | Encoder Resolution | 1000 PPR |
| Driver | 24V-48VDC | Operating Temperature | -20°C to 50°C |
| Control Mode | Closed Loop | Rated Current | 6.0A |
| Encoder line number | 1000 | Insulation resistance | >=500MΩ |
| Brand Name | Rattm Motor | Model Number | 2N Kit |
| Certification | CE CCC | Place of Origin | China |
| High Light | Nema23 Closed Loop Servo Motor ，Integrated Closed Loop Servo Motor ，Hybrid Closed Loop Servo Motor | ||
2N.M Nema23 Closed Loop Servo Motor Integrated Digital Hybrid For CNC Router Milling Controller Kit
1. Product description
2.)The default work is in closed loop mode, no loss of step, and it also supports working in open loop mode.；
3.)Increase the output torque and running speed of the motor;
4.)The current level is intelligently adjusted according to the load, reducing the temperature rise of the motor, locking the current, and adjusting the closed-loop peak current.；
5.)Adapt to various mechanical load conditions (including low-rigidity loads such as pulleys and pulleys) without adjusting the gain parameters;；
6.)The position command smoothing filter can be set, the motor runs smoother, the vibration is lighter, and the acceleration and deceleration dynamic performance is improved.；
7.)Zero-speed static capability without vibration after positioning；
8.)Support single and double pulse input, pulse response frequency up to 200KHZ；
9.)Support 15 fixed subdivisions, and support software to set any subdivision (200~65535)；
10.)Support modbus RTU protocol on RS232, position and speed control controlled by communication；
11.)Support monitoring of motor operating conditions, including speed, position deviation, bus voltage, operating current, etc.
12.)Voltage range: DC+24V~48V；
13.)With overcurrent, overvoltage, positional tolerance and other protection；
2-1 Electrical index
| Power supply | DC36VRecommended power supply DC36V |
| Output current | Peak 6.0A (current varies with load) |
| Logic input current | 10mA7~16mA, recommended 10mA |
| Pulse frequency | 0~200KHz |
| Encoder line number | 1000 |
| Insulation resistance | >=500MΩ |
2-2 Use environment and parameters
| cooling method | Natural cooling or external heat sink | |
| Use environment | Use occasion | Try to avoid dust, oil and corrosive gases |
| Temperature | 0~40℃ | |
| Humidity | 40~90%RH | |
| Vibration | 5.9m/s2Max | |
| Storagetemperature | -20℃~80℃ | |
| weight | About1.3Kg | |
2-3 Mechanical installation size
3. Typical wiring diagram
4. Drive interface and wiring introduction ( Interface definition )
4-1. Power input port
| Terminal number | Symbol | Name | Description |
| 1 | +Vdc | DC power positive terminal | DC+24V~48V Recommended DC+36V power supply |
| 2 | GND | DC power ground |
4-2. Control signal port
| Terminal number | Symbol | Name | Description |
| 1 | PUL+ | Pulse positive input | Support 5~24V |
| 2 | PUL- | Pulse negative input | |
| 3 | DIR+ | Positive input | |
| 4 | DIR- | Negative input | |
| 5 | ENA+ | Enable positive input | |
| 6 | ENA- | Enable negative input | |
| 7 | PEND+ | In-position signal positive output | OC gate output, the default closure indicates that the positioning is completed, and the open indication indicates that the positioning is not completed. |
| 8 | PEND- | In-position signal negative output | |
| 9 | ALM+ | Alarm signal positive output | OC gate output, the default close indication has an alarm signal, and the open indication indicates no alarm signal. |
| 10 | ALM- | Alarm signal negative output |
4-3. RS232 communication port
| Terminal number | Symbol | Name |
| 1 | +5V | Positive power terminal |
| 2 | TXD | RS232 sender |
| 3 | GND | Power ground |
| 4 | RXD | RS232 receiver |
| 5 | NC |
4-4. Status indication
| Steps / circle | SW3 | SW4 | SW5 | SW6 |
| default | on | on | on | on |
| 800 | off | on | on | on |
| 1600 | on | off | on | on |
| 3200 | off | off | on | on |
| 6400 | on | on | off | on |
| 12800 | off | on | off | on |
| 25600 | on | off | off | on |
| 51200 | off | off | off | on |
| 1000 | on | on | on | off |
| 2000 | off | on | on | off |
| 4000 | on | off | on | off |
| 5000 | off | off | on | off |
| 8000 | on | on | off | off |
| 10000 | off | on | off | off |
| 20000 | on | off | off | off |
| 40000 | off | off | off | off |
The default file segmentation defaults to 400, which can be modified by the host computer software.
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer,Exporter,Trading Company,Seller,Other
Year Established:
2009
Total Annual:
700000-1000000
Employee Number:
30~50
Ecer Certification：
Verified Supplier
Leading intelligent manufacturing and connecting the future of CNC - Changzhou POWACE International Trade Co., Ltd. In the rapidly developing era of intelligent manufacturing, Changzhou POWACE International Trade Co., Ltd. responds to the situation Sheng, as a company specializing in CNC techn... Leading intelligent manufacturing and connecting the future of CNC - Changzhou POWACE International Trade Co., Ltd. In the rapidly developing era of intelligent manufacturing, Changzhou POWACE International Trade Co., Ltd. responds to the situation Sheng, as a company specializing in CNC techn...
Get in touch with us
Leave a Message, we will call you back quickly!