startec ltd
| name | Light Weight Antenna Mast 6 Meter 18 Meter Hand Push Up Mobile Antenna Mast Tower |
| material | 6063 alu alloy |
| lock | self lock |
| erect | by hand |
| surface | anodized or painted |
| color | customized |
| Packaging Details | wooden case |
| Delivery Time | 5-8 working days |
| Payment Terms | L/C, D/A, D/P, T/T, Western Union, Paypal |
| Supply Ability | 5 sets |
| Brand Name | YG |
| Place of Origin | China |
| Certification | ISO |
View Detail Information
Explore similar products
Vehicle Mounted 6M To 15M Radio Antenna Telescopic Mast
Outdoor 30Ft 9M Customized Aluminium Telescopic Mast Aerial Photography Mast
Tripod 18M Hand Push Up 2MM Aluminium Telescopic Mast
Guyed Lightweight Push Up 18M Aluminium Telescopic Mast
Product Specification
| name | Light Weight Antenna Mast 6 Meter 18 Meter Hand Push Up Mobile Antenna Mast Tower | material | 6063 alu alloy |
| lock | self lock | erect | by hand |
| surface | anodized or painted | color | customized |
| Packaging Details | wooden case | Delivery Time | 5-8 working days |
| Payment Terms | L/C, D/A, D/P, T/T, Western Union, Paypal | Supply Ability | 5 sets |
| Brand Name | YG | Place of Origin | China |
| Certification | ISO | ||
| High Light | 6M Antenna Mast Tower ，Movable Antenna Mast Tower ，Movable Telescoping Radio Tower | ||
Lightweight 6M 18M Movable Antenna Mast Tower
product introduction:
Our mast pole is made of light weight aluminum, extremely portable but ready to provide years of permanent service too!
material: aluminum alloy round/square tube
sections: 2 adjustable
level: water puple water level
leg length: 1.2---2m for diffrent height masts
ideal for Emergency Response Antenna Systems, Restricted Space Antennas
specification:
Hand push up
| extended height (m) | No. Of section | Retracted height(m) | Outer tube range(mm) | Self weight (kg) | Max.payload (kg) |
| 3 | 2 | 1.55 | 50-55 | 3 | 20 |
| 4 | 3 | 1.35 | 50-60 | 4 | 20 |
| 5 | 3 | 1.7 | 50-60 | 5 | 20 |
| 6 | 4 | 1.55 | 45-60 | 6.5 | 15 |
| 7 | 4 | 1.8 | 45-60 | 7 | 15 |
| 8 | 5 | 1.65 | 45-65 | 9 | 12 |
| 9 | 5 | 1.85 | 45-65 | 10 | 12 |
| 10 | 6 | 1.7 | 40-65 | 12 | 10 |
| 12 | 7 | 1.75 | 35-65 | 28 | 8 |
| 15 | 8 | 1.9 | 30-65 | 6 |
product photo:
features:
|
Accessories:
Usually these masts require a flat or socket wrench, with the quick release clamps you can raise and lower the masts without any tools.
Even with limited space these quick clamps can be easily used, because the lever can be adjusted at any position. Just pull out and release the lever, the strong spring latches the lever at the desired position.
| Pulling cord box with handle bars | 3 units |
| Ground anchor | 3 pieces |
| Handle lifting bar | 2 pieces |
| 20cm 304 stainless steel stakes | 6 pieces |
| Tripod | 1 unit |
Attentions:
The mast can be extended to any length and securely locks into place by means of a massive clamp. The maximum allowed extended length is marked by a color ring approx. 20cm before the end of each tube. There is no fixed stop which makes it advisable to approach the marking slowly when extending the telescopes.
These masts are ideally suited for portable applications due to the low weight and the telescopic mechanism. When setting up the mast please pay special attention to the clamping length; the clamping length of the mast must be at least 1/6th of the extended length, or at least 1 meter at the minimum. When extending the mast more than 6 meters measured from the uppermost clamping point additional guys are mandatory.
The tubes are made of weather-proof aluminum alloy. The tubes are tapered by 5 mm and the tube thickness is 2mm. Please refer to the following table for weight and dimensions. The stated additional forces refer to a horizontally applied force at the tip of the extended mast - without guys and a mast clamping length of 1/6th. The calculation includes the inherent load at a wind speed of 50km/h (which is equivalent to a wind force of 7).
also we can produce according to clients special requests, and can give proposals.
Packing, delivery tiem, and shipping:
We will close then pack the goods safely in solid wooden box.
Prodcution lead time for sample: 2 weeks; 4 weeks for bulk order
Ship by sea, air, or express according to your request.
Company Details
Business Type:
Manufacturer,Exporter
Year Established:
2008
Total Annual:
500000-600000
Employee Number:
>100
Ecer Certification：
Active Member
Establised at the year of 2008, from begnning, we only produce hand push antenna masts, later on we developed hand winch type mast, and hand winch lattice tower, we focus on the manufacturing light weight, easy to operation mast and towers. They are ideal product to replace the pneumatic tower. O... Establised at the year of 2008, from begnning, we only produce hand push antenna masts, later on we developed hand winch type mast, and hand winch lattice tower, we focus on the manufacturing light weight, easy to operation mast and towers. They are ideal product to replace the pneumatic tower. O...
Get in touch with us
Leave a Message, we will call you back quickly!