Nanjing Kelisaike Safety Equipment Co., Ltd.
| Description | UV Hot-Wet Online Monitoring Gas Analyzer |
| Stock | 1PC |
| Model NO. | KF100 |
| Power | 220VAC/50Hz 100W |
| Protection Grade | IP42 |
| Sample Gas Input and Output Interface | ø 6 Tube Fittings |
| Port | Shanghai |
| Resonse Time(T90) | Less Than 10s |
| Origin | Nanjing, China |
View Detail Information
Explore similar products
20mA 4000W CEMS Emissions Monitoring Equipment O2 No2 with UV Analyser
Cabinet CEMS Continuous Emission Monitoring System Explosion Proof
Customizable Flue Gas CEMS Monitoring System With Ultraviolet Light
Electrical CEM Emissions Monitoring 220V AC High Accuracy For Industrial Safety
Product Specification
| Description | UV Hot-Wet Online Monitoring Gas Analyzer | Stock | 1PC |
| Model NO. | KF100 | Power | 220VAC/50Hz 100W |
| Protection Grade | IP42 | Sample Gas Input and Output Interface | ø 6 Tube Fittings |
| Port | Shanghai | Resonse Time(T90) | Less Than 10s |
| Origin | Nanjing, China | ||
| High Light | uv continuous emission monitoring system ，uv cems emission monitoring system ，so2 cems emission monitoring system | ||
The analyzer based on UV absorption spectroscopy and chemometric algorithms to measure SO2, NOx, O2, NH3, Cl2, O3, H2S and other gases concentration, with high accuracy, high reliability, fast response time, wide application and other characteristics, the indicators have reached or exceeded similar products, it can be widely used in environmental online monitoring, industrial control, security monitoring and other occasions.
>>>Key Features
Full spectrum measurement and DOAS (Differential Optical Absorption Spectroscopy) algorithm, excelling in accuracy, repeatability and anti-interference with moisture, dust.
Modular design and no moving parts, higher reliability and easier maintenance.
Pulse Xenon Lamp used as light source with over 10-year lifetime.
The adoption of diode array sensor enables instant spectrum acquisition and rapid response.
>>> Features and Benefits
1. Analyzer uses the following optical technology platform to get the UV absorption spectrum, the technology platform consists of light source, gas chamber, fiber optics and spectroscopy (including the diaphragm, holographic gratings, linear array detector) and other optical components.
2. UV-visible light emitted by the optical window into the gas chamber, is absorbed by the sample gas flowing through the measured gas chamber, carrying the tested sample gas absorbs light through the lens after gathering information coupled into optical fiber through the optical fiber transmission into the spectrometer splitting, sampling, to obtain the absorption spectrum of the gas.
3. Use DOAS technology spectrum analysis, can analyze the concentration of the gas in the relevant component.
1) The light source emits ultraviolet beam which transfers to gas cell through optical fiber.
2) After absorption by measuring gas, the light beam transfers through optical fiber to spectrometer.
3) Being dispersed through the grating, and converted into electric signal by the array sensor, a continuous absorption spectrum of measuring gas is thereafter obtained.
| Item | UV Hot-Wet Method | NDIR |
| Spectral Range | Complete and continuous absorption spectra obtained through holographic grating and diode array detection | Non Dispersive, characteristic absorption spectra obtained through band-pass filter |
| Linear Response | High wavelength resolution secures linear response | band-pass filtration compromises linear response |
| SO2 Loss | Hot-wet prohibits SO2 dissolution | Condensation inevitably causes SO2 loss |
| Sampling System | Heat tracing. Requests only dust filtration, simple and no corrosive | Cold-dry. Requests dust filtration, condensation, water removal and corrosion proof |
| Zero Calibration Period | Long (DOAS algorithm) | Short |
| Anti-Interference | The combination of complete & continuous absorption spectra, high wavelength resolution, DAOS algorithm erases interference from dust, moisture and background gases | Vulnerable to moisture interference |
| Gas Cell | Connected by optical fiber, easy to replace and low maintenance cost | Complex to replace and maintenance |
| Maintenance | ||
| Reliability | No moving parts | Moving parts existed |
>>>Technical Specifications
| SO2, NOx Analyzer | |
| Technical Principle | UV-DOAS |
| Installation type | Hot-wet Extractive |
| Measurement Range | 0~200ppm, 0~1000ppm, 0~3000ppm |
| Zero Drift | ≤ ±2%F.S. |
| Span Drift | ≤ ±2%F.S. |
| Accuracy | ≤ ±1% |
| Response Time(T90) | ≤ 60s |
| Linearity | ≤ ±1%F.S. |
| O2 Analyzer | |
| Technical Principle | Zirconia/Electrochemical |
| Measurement Range | 0~25% |
| Response Time(T90) | ≤ 60s |
| Linearity | ≤ ±2%F.S. |
| CO, CO2 Analyzer | |
| Technical Principle | NDIR |
| Installation type | Extractive |
| CO Measurement Range | 0~1000 ppm |
| CO2 Measurement Range | 0~20% |
| Zero Drift | ≤ ±2%F.S. |
| Span Drift | ≤ ±2%F.S. |
| Accuracy | ≤ ±1% |
| Response Time(T90) | ≤ 60s |
| Linearity | ≤ ±2%F.S. |
Technical Data for UV gas analyzer
| Project | Indicators |
| SO2 Detection range | Min:0-50ppm,Max:0-100%, |
| NO Detection range | Min:0-50ppm,Max:0-100%, |
| O2 Detection range | 0-25%, Electrochemical or zirconia |
| Linearity error | ≤±1%F.S. |
| Repeatability | ≤1% |
| Zero drift | ≤±1%F.S./ week |
| Span drift | ≤±1%F.S./week |
| Ambient temperature | 5ºC~45ºC |
| Response time(T90) | <60s |
| Size | 19" *3U*320mm |
| Analog interface | 3-way 4-20mA output,2-way 4-20mA output |
| Data interface | 4-way switch input; 8-way relay output |
| Communication Interface | 1-way RS-232,1-way RS-485(Supports Mod-bus protocol) |
| Power | 220VAC/50Hz 100W |
| Protection grade | IP42 |
| Sample gas input and output interface | Ø6 Tube Fittings |
>>> OEM
Customize producta are also available,pls feel free to contact me for more detailes.
>>> Our Services
1.The inquiry and question will be replied within12hours
2.High quality with competitive price
3.Good after sales service
4.Accept OEM
5.One of the most professional safety equipment manufacture with a very good and trained team
>>> FAQ
Q: Can I order one piece for sample to test the quality?
A: Yes, We recommend to check the sample before place an qty order.
Q: May I have your catalogue and price list for trial order in MOQ quantity?
A: All our products were shown on -line, please have a detailed looking and choose the interested models in our site. Or you can send email to us.
Q: If I order big quantity, what's the good price?
A: Please send the details enquiry to us, such as the Item Number, Quantity for each item, Quality request, Logo, Payment Terms, Transport method, Discharge place etc. We will make the accurate quotation to you as soon as possible.
>>>COMPANY VIEW
Nanjing KELISAIKE company is one of the largest safety equipment manufactures, possesing the most complete production range and specifications in the safety equipment industry of mainland China. Nanjing KELISAIKE was founded in 2004, including three subsidiaries in Beijing, Xi'an and Xinjiang, and more than 30 domestic sales service centers, with total registered capital of 5.16 million Yuan.
We are the leader enterprise of the science and technology, persisting in creating core competencies by the core technology. In the company, there is one professional and technical talent team who masters core technology, including more than 10 senior technicans and masters.
Standard products and services cover the portable gas detector, fixed gas transmitter, wall-mounted gas detector, gas detector control unit, air breathing apparatus etc. Also Nanjing KELISAIKE is an experienced factory for OEM service, providing professional design and construction of the customize products. The products are widely used in fields of petroleum, chemical, gas transmission and distribution, warehousing, municipal gas, fire fighting, environmental protection, metallurgy, pharmacy, energy and power industry.
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer,Exporter,Trading Company,Seller
Year Established:
2004
Total Annual:
1300000-2000000
Employee Number:
100~300
Ecer Certification：
Verified Supplier
Nanjing KELISAIKE Safety Equipment Company is one of the largest safety equipment manufacturers, possessing complete product ranges and specifications in the safety equipment industry of mainland China. Founded in 2004, Nanjing KELISAIKE has set three subsidiaries in Beijing, Xi'an, and Xinjiang... Nanjing KELISAIKE Safety Equipment Company is one of the largest safety equipment manufacturers, possessing complete product ranges and specifications in the safety equipment industry of mainland China. Founded in 2004, Nanjing KELISAIKE has set three subsidiaries in Beijing, Xi'an, and Xinjiang...
Get in touch with us
Leave a Message, we will call you back quickly!