Nanjing Powder New Material Co., Ltd.
| Payment Terms | L/C, T/T, Western Union |
| Supply Ability | 3000 tons per year |
| Delivery Time | 8-15 work days |
| Packaging Details | 20kg/carton |
| Color | zinc yellow |
| Material | epoxy resins |
| Curing temperature | 180°C |
| Curing | 15min |
| Gloss | 98% gloss |
| Pencil hardness | H-2H |
| Certificate | ISO9001, ISO14001,SGS |
| Usage | exterior or interior |
| Brand Name | PURDA |
| Model Number | RAL 1018 |
| Certification | ISO, SGS, Rohs |
| Place of Origin | CHINA |
View Detail Information
Explore similar products
Metal Substrates Gloss Powder Coat , Powder Coating Chemical Resistance
Indoor High Gloss Powder Coat Finish , Red Powder Coating Corrosion Resistance
Epoxy Polyester Resin Decorative Powder Coating Black Color High Glossy Smooth
RAL 6017 High Gloss Powder Coat UV Resistant Environmental Friendly
Product Specification
| Payment Terms | L/C, T/T, Western Union | Supply Ability | 3000 tons per year |
| Delivery Time | 8-15 work days | Packaging Details | 20kg/carton |
| Color | zinc yellow | Material | epoxy resins |
| Curing temperature | 180°C | Curing | 15min |
| Gloss | 98% gloss | Pencil hardness | H-2H |
| Certificate | ISO9001, ISO14001,SGS | Usage | exterior or interior |
| Brand Name | PURDA | Model Number | RAL 1018 |
| Certification | ISO, SGS, Rohs | Place of Origin | CHINA |
| High Light | gloss white powder coat ，thermoset powder coating | ||
Free sample RAL 1018 zinc yellow tgic spray paint,epoxy powder coat paint colors supplier
Curing of Powder Coated Parts
Thermoset powder materials require a certain amount of thermal energy applied for a certain time to produce the chemical reaction needed to cross-link the power into a film. The powder material will melt when exposed to heat, flow into a level film and then begin to chemically cross-link before ultimately reaching full cure. Various methods can be used to supply the energy needed for cure.
Convection ovens use a heat source (usually natural gas) and fan to distribute and circulate air through a duct inside the oven. The heated air will in turn heat the part and then the coating. Convection ovens are the most common type of cure oven used for powder. As the part reaches peak temperature it will conduct heat into the coating and cause the powder to cure.
Infrared (IR) ovens, using either gas or electricity as their energy source, emit radiation in the IR wavelength band. This radiated energy is absorbed by the powder and substrate immediately below the powder without heating the entire part to cure temperature. This allows a relatively rapid heat rise, causing the powder to flow and cure when exposed for a sufficient time. Parts can be cured in less time in an IR oven, but the shape and density of the part can affect curing uniformity.
Combination ovens generally use IR in the first zone to melt the powder quickly. The following convection zone can then use relatively higher airflows without disturbing the powder. These higher flows permit faster heat transfer and a shorter cure time.
A variety of radiation curing technologies are available, including near-infrared, ultraviolet (UV) and electron beam (EB). These processes have the potential to open up new applications for powder coating of heat-sensitive substrates such as wood, plastic parts and assembled components with heat-sensitive details.
SPECIFICATION:
| Main Material | Polyester resin,barium sulfate,titanium dioxide |
| Surface Type | Gloss,matte,wrinkle,sand grain,antique, Hammer,crocodile skin, wood effect,candy,chrome,transparent,semitransparent,metallic,and special pattern |
| Powder Properties | Specific gravity : 1.3 - 1.75 (depend on colors) |
| Average particle size : 35 - 45um | |
| Coating Properties | Film thickness(ISO 2178) :60 - 90 μm |
| Coverage:15㎡ based on 60μm | |
| Pencil hardness: ASTM D3363,H-2H | |
| Adhesion :GB/T 9286-1998,0 grade | |
| Bending test:GB/T 6742 ,=<2mm | |
| Cupping test:GB/T 9753,>=7mm | |
| Direct and reverse impact (ASTM D2794) : > 50kg.cm | |
| Salt spray Resistance ( ASTM B117, 1000hrs)(Maximum undercutting ,1 mm ): No blistering or loss of adhesion | |
| Heat and moisture test GB/T 1740,>=1000 hours,no change | |
| Application Schedule | Applied by : Electrostatic spraying devices |
| Curing schedule :15 minutes at 180 ℃ | |
| Advantage | Good adhesion,anti-corrosion,UV resistant, strong coating film, |
| Accurate colors, good leveling | |
| Shelf Life | 12 months
|
Purchase Note:
1.M.O.Q :
The minimum order is 500kg ,each color ≥ 100kg
2.Colors:
RAL color :we usually use RAL colors that is widely used in paint industry and easily find in market
Custom color : Color matching is available , if you have colors model ,please send to us for matching .
3.Prices:
Prices depend on the colors and using environment ,for prices please tell us the colors and using environment (indoor use or outdoor use).
4.Time of delivery :
Production will take about 5-8 days after receipt of prepayment,this is subject to the quantity .
5.Payment :
30% T/T prepayment , 70% T/T before shipment (or against BL) or LC at sight .
6.Samples:
1kg powder sample is available for each color for your testing.
Sample is free of cost,but if you pay for the air freight we will highly appreciate.
Company Details
Business Type:
Manufacturer,Exporter,Seller
Year Established:
2005
Total Annual:
200-300
Employee Number:
100~150
Ecer Certification：
Active Member
Nanjing Powder New Material Co., Ltd is a professional powder coating manufacturer and exporter in China, Located in Nanjing,the center of powder coating industry,we control the cost well and it is convenient to arrange delivery in time. With 11 years experience, we focus on developing ... Nanjing Powder New Material Co., Ltd is a professional powder coating manufacturer and exporter in China, Located in Nanjing,the center of powder coating industry,we control the cost well and it is convenient to arrange delivery in time. With 11 years experience, we focus on developing ...
Get in touch with us
Leave a Message, we will call you back quickly!