POETRONICS INDUSTRIAL LIMITED
| Output Power | 1 - 50W |
| Output Type | Single |
| Output Voltage | 24V |
| Output Frequency | 50-60Hz |
| Output Current | 1A |
| Transmission Rate: | 10M/100Mbps |
| Protocol Standard: | Non-IEEE802.3 |
| Delivery Time | 3-30days |
| Input Voltage | AC 100-240V |
| Place of Origin | CHINA |
| Model Number | POE-A2401 |
View Detail Information
Explore similar products
48VDC,1A POE Switching Power Adapter & Supply
48VDC,0.5A POE Switching Power Adapter & Supply
24VDC,2A POE Switching Power Adapter & Supply
24VDC,0.75A POE Switching Power Adapter & Supply
Product Specification
| Output Power | 1 - 50W | Output Type | Single |
| Output Voltage | 24V | Output Frequency | 50-60Hz |
| Output Current | 1A | Transmission Rate: | 10M/100Mbps |
| Protocol Standard: | Non-IEEE802.3 | Delivery Time | 3-30days |
| Input Voltage | AC 100-240V | Place of Origin | CHINA |
| Model Number | POE-A2401 |
POE SWITCHING POWER SUPPLY & ADAPTER
POE-A2401
Over View
POE (Power Over Ethernet) is a technology solution that, under the case of no any change for current Ethernet Cat5 wiring/cabling infrastructure, not only transfer data signal but also provide direct current power for some IP based terminal device (like IP telephony, Wireless LAN access point, Network camera, etc.).
POE technology can minimize the cost while ensuring the normal operation of the existing network and the safety of the existing structured cabling.
POE adapter provide a power solution for the related device, it can supply power and simultaneously be a media for data transfer in anywhere there is a cat5 cable.
General Specification:
Model:POE-A2401
Input:AC100-240V, 50-60Hz
Output:DC24V, 1A; 24W
Key Feature:
1. Strong resistance of interference, high reliability
2. Low DC ripple, high efficiency, low standby power consumption, lower calorific value, natural cooling, long service life.
3. Broad input voltage range (100-240VAC), conform to multinational use standard.
4. Excellent insulating performance, higher dielectric intensity
5. Good load capacity, constant current & constant voltage, wider adaptive range, over-voltage protection for input and output, short-cut protection, over-current protection.
6. The shell is made of flame resisted engineering plastic, which greatly improve the equipment using safety
7. Transmission Distance/Operating Distance: Max.100 meters (CAT 5 or better cable). It specifically depends on the quality of network cable, supply voltage and adaptability of power device for voltage. The higher quality of network cable, the voltage drop will be less, and the effective power distance will be further accordingly.
INPUT CHARACTERISTICS:
Direct Feeding=Plug and supplying power, supplying power directly without advanced detection for Power Device (PD)
Full Load Test 1A
OUTPUT CHARACTERISTICS:
Output Power:
| Voltage | Min. Load | Max. Load | Peak Current | Output Power |
| 24 VDC | 0 A | 1.0 A | 1.0-1.2 A | 24 W |
Loading Characteristics/Regulation:
| Voltage | Min. No-Load Voltage | Max. No-Load Voltage | Line Regulation | Load Regulation |
| 24 VDC | 24.0V | 24.75 V | ±3% | ±5% |
Technical Specification
| Input Voltage/Frequency | AC100-240V; 50-60Hz |
| Input Adjusting Range | AC90-264V; 47Hz~63Hz |
| Output Voltage/Current | 24V, 1A; 24W |
| Output Voltage Regulation | -23.7VDC±2% |
| Load Regulation | -24.5VDC±1% |
| Reset Function | Default non-resettable, it’s optional |
| DC Output Broadband Noise Voltage | 3.4kHz~150kHz ≤50mv |
| Network Port Mark | Data&Power Out=Power pin (4/5 “+” & 7/8 “-”) + Data pin (12/36) Data In=Data pin (12/36) |
| Transmission Rate | 10M/100Mbps |
| LED Power Indicator | Green Color; Indicator On: Power in normal working condition; Indicator Off: Power supply failure; Note: When the power in normal working condition, after connecting network cable, the indicator off means it’s in over-load protection or shortcut status, it should be the requiring power of powered device is too high, network cable is shortcut or the powered device is broken. |
| System Reliability | MTBF＞100khours |
| Operating Environment | Operating/Ambient Temperature: -10℃~50℃ |
| Relative Humidity: 5%~90%RH | |
| Operating and Storing Place: Ventilation and heat dissipation, Clean, No conductive dust, No corrosive gas | |
| Place of No dangerous of explosion | |
| Safety Assurance | Conducted Emission(CE) and Radiated Emission(RE) compliant with EN60950, CE, FCC standard |
| Dimension/Weight | 84mm×47mm×54mm; 90g |
| Power Plug Specs | EU/US/UK/AU Plug are available |
| Lightning Protection | AC Input can stand 5 times positive & negative 5KV, 8/20uS instantaneous current wave, lasting 1 minutes each time. The lightning protection circuit of the power adapter have invalidation alarming function and protective components like glass protective tube |
| Application | This is ordinary switching power supply, great protective performance, superior stability and adaptability connecting with power device, its scope of application include security surveillance, wireless access point, electrical machine, communication equipment, health care products and those POE supported equipment. |
| Warranty | One year |
Company Details
Business Type:
Manufacturer,Exporter,Trading Company,Seller
Year Established:
2012
Total Annual:
1000000-5000000
Employee Number:
50~100
Ecer Certification：
Site Member
POETRONICS INDUSTRIAL LIMITED, established in the background of 7 years’ experience in switch mode power supply and increasingly rapid growing demand of market in Power over Ethernet (PoE) based IP Video Surveillance, Wireless Access Point (AP), VoIP Phone and Portable Devices, etc. ... POETRONICS INDUSTRIAL LIMITED, established in the background of 7 years’ experience in switch mode power supply and increasingly rapid growing demand of market in Power over Ethernet (PoE) based IP Video Surveillance, Wireless Access Point (AP), VoIP Phone and Portable Devices, etc. ...
Get in touch with us
Leave a Message, we will call you back quickly!