Brass Solenoid Valve Normally Closed

Product Specification

Z1 Compact Series 2 / 2 - Way Direct Acting Normally Closed Anti - Explosion Solenoid Valve Water Valve

Applicability :

1 . The pipeline fluid must same as solenoid valve marked medium .

2 . Fluid temperature must be less than the marked temperature .

3 . Solenoid valve allowed the liquid viscosity , generally under 20 CST ,  more than 20 CST shall be indicated .

6 . Pay attention to the orifice and port size ; usually only open and close two type ; Conditions

permit , please install bypass pipe , easy maintenance ; When there is water drain to customize

solenoid valve opening and closing time regulation .

7 . Pay attention to the environmental temperature on the influence of solenoid valve .

Reliability :

Solenoid valve is divided into normally closed and normally open . General choose normally close , power on is open and power off is shut down ; But in the open for a long time and very short close time to choose the normally open type .

Ction time is very short at high frequency generally choose directly acting , large diameter

choose fast series .

Security : 

General solenoid valve is not waterproof , when needs waterproof model , we can be customized .

Nominal pressure solenoid valve of the highest calibration must be more than the highest pressure

in the pipeline , otherwise life will shorten or other unexpected circumstances .

Economy :

There are a lot of solenoid valve can be common use , but on the basis of can satisfy the above three terms , should choose the most economical products

Details                                                                                                                                                            

1 : 2 - Way normally closed solenoid valve , Closed when de - energized , Open when energized . Body materila : brass

2 : Max . Allowable pressure 16kgf / cm² ; Fluids Temp : 0 ℃ ~ 120 ℃

3 : Serialized products , small in size , large flow rate , widely use

4 : Flow as the arrow , mounts in any position ; Best position is solenoid vertical and upright direction .

5 : Voltage : 220VAC / 230VAC / 240VAC / 110VAC / 24VAC / 50 / 60HZ 24VDC / 12VDC / ; Voltage Tolerance : + 10 % to - 10 % applicable voltage

6 : Coil can fix Germany Nass Coil , For orifice under DN25 only .

7 : This series valves are offered NBR , VITON , EPDM etc for Seals and diaphragm to provide on - off control of various fluids .

Why choose us                                                                                                                                              

1: Various style for each products and completely series pneumatic products .
2: Large stock for fast shipping .
3: High quality with competitive price .

4: Provide free products information .
5: Reliable quality assured and active after-sell service
6: One year quality guarantee

FAQ                                                                                                                                                               

Q: How much is our minimum order quantity ?
A: Our minimun quantity is 1 Piece .

Q: Could you offer the free samples ?
A: Yeah, we could offer the free samples based on special customer.pre-production sample,production sample.

Q: What is the price of the product ?
A: Our prices are based on the size and type of material , if you can give me the information ,
then we can give you an estimated price is for reference only . We can do any size and any desgin .

Q: what types of products you can make ?
A: We can make many kinds of stainless steel materials and brass,aluminum . Valve / solenoid valve / electric valve / pneumatic valve and air cylinder products and so on .

Q: Do your company have specialized technical personnel ?
A: Design as your requirements,and have QC for make 100% inspection

Our products are high quality with 12 month guarantee ,and support paypal payment.