Ningbo Sanmin Import And Export Co.,Ltd.
| Payment Terms | L/C, T/T, Western Union |
| Supply Ability | Negotiation |
| Delivery Time | Negotiation |
| Packaging Details | Plastic Bags , Boxes , Carton , Pallet Or As Customer Advice |
| Pressure | 0 . 3 - 0 . 6MPa |
| Temperature | - 25 ~ 60 ℃ |
| Relative Humidity | ≤ 85 % |
| Medium | Clean Air |
| Voltage | DC24V / AC110V / Etc |
| Diaphragm | Double Diaphragm |
| Diameter | G1 - 1 / 2 " , G2 " |
| Body | ADC 12 Die Cast |
| Brand Name | NBSANMINSE |
| Model Number | QD - Z - 40S / 50S |
| Certification | ISO9001 |
| Place of Origin | CHINA |
View Detail Information
Explore similar products
Custom Air Disc Type Check Valve For Pharmaceutical / Chemical Industries
SMWZ644 -DNA -C Split Disc Check Valve Double Beat 100% Airtight Eco Friendly
Cement Plant / Power Station Double Disc Valve Excellent Wear Resistant
High Performance Double Disc Valve Temperature ≤ 200℃ SMDF-DNA-J
Product Specification
| Payment Terms | L/C, T/T, Western Union | Supply Ability | Negotiation |
| Delivery Time | Negotiation | Packaging Details | Plastic Bags , Boxes , Carton , Pallet Or As Customer Advice |
| Pressure | 0 . 3 - 0 . 6MPa | Temperature | - 25 ~ 60 ℃ |
| Relative Humidity | ≤ 85 % | Medium | Clean Air |
| Voltage | DC24V / AC110V / Etc | Diaphragm | Double Diaphragm |
| Diameter | G1 - 1 / 2 " , G2 " | Body | ADC 12 Die Cast |
| Brand Name | NBSANMINSE | Model Number | QD - Z - 40S / 50S |
| Certification | ISO9001 | Place of Origin | CHINA |
| High Light | pulse air valve ，pulse jet solenoid valve | ||
QD - Z - 40S / 50S Series Electromagnetic Pulse Valve GOYEN Replace G1 - 1 / 2 " , G2 " Dust proof valve Dust Control Valve
Usage
Electromagnetic valve ( Also called diaphragm valve ) is the” switch “for compressed air in the dust clean blowing system of the pulse bag filter . Controlled by the output signals of the pulse jet control device , it makes dust clean to the filter bags cell by cell to keep the resistance of thebaghouse within the set range and thus guarantee the processing functions and the dust collecting efficiency of the baghouse .
Z type electromagnetic pulse valves is a right angle valve , with the 90 degree , angle between the inlet and outlet , which is suitable for the installation connection between the gas dome and the baghouse blow tube provide good air flow and dust clean pulses satisfying the requirements .
During installation and commissioning
Failure phenomena
1 . The valves cannot all be opened, but the leading part does act.
2 . Some valves do not work, but the others are normal.
3 . The valves cannot all be closed. There is leakage. There is no way to establish a gas dome.
4 . Some valves cannot be closed. There is leakage.
5 . A valve closing is slowly.
Possible Reason
1 . Check the gas dome pressure to see if it is too low.
2 . Check the valve coil connection and coil
3 ( 1 ) . Y-valve. Some valves for the same gas dome are leaking, thus causing leakage for all the valves.
3 ( 2 ) . Z-valve. The valve inlet and blowing muzzle are installed backwards.
4 . There is some dirt or debris on the membrane, ii is blocking the moving iron core.
5 . The membrane orifice is blocked.
Troubleshooting
1 . Check the leakage
2 . Replace the accessories
3 ( 1 ) . Check the leakage
3 ( 2 ) . Re-install
4 . Clean the membrane and check that the membrane is complete. Check the moving iron core and air lock.
5 . Dredge the membrane orifice
During use period
Failure phenomena
1 . Some valves are leaking. The membrane cannot close tightly and the valve is always open a
little.
2 . Coil is hot and burned out.
3 . Voltage exists but the valve does not operate.
4 . Ambient temperature is below -20℃. The valve is leaking and cannot open.
Possible Reason
1 . There is some dirt or debris on the membrane, the leading part is damaged. Moving iron core is blocked.
2 . It has been turned on for too long.
3 . Membrane is damaged and the orifice is blocked.
4 . Ambient temperature is too low and here is frost in the valve.
Troubleshooting
1 . Clean the membrane and check that the membrane piece is complete. Check the moving iron core and the air lock. Replace the accessories if necessary.
2 . Check the working condition of the control system.
3 . Replace the accessories in time.
4 . Pay attention to insulation and maintaining proper temperatures.
Company Details
Business Type:
Manufacturer,Importer,Exporter,Trading Company
Year Established:
2014
Total Annual:
2000000-3000000
Employee Number:
40~60
Ecer Certification：
Verified Supplier
NINGBO SANMIN IMPORT & EXPORT CO.,LTD. was established in 2014.Our company is mainly engaged in instrumentation, pneumatic and hydraulic industry accessories and services, has more than 10 series of core products.Focusing on the production of automatic machinery to provide a variety of options, ... NINGBO SANMIN IMPORT & EXPORT CO.,LTD. was established in 2014.Our company is mainly engaged in instrumentation, pneumatic and hydraulic industry accessories and services, has more than 10 series of core products.Focusing on the production of automatic machinery to provide a variety of options, ...
Get in touch with us
Leave a Message, we will call you back quickly!