ISO17357 Inflatable Rubber Wharf Yokohama Fender 1500mm*3000mm

Product Specification

ISO17357 Inflatable Rubber Fender Wharf Yokohama Fender

Inflatable rubber fender introduction:

Pneumatic fenders is a kind of ship supplies for berth cushion and protection. Yokohama pneumatic fender is more practical and economical than general ship fender, so it is very popular.

The inflatable rubber fender is a rubber airtight container made of gluon cloth as skeleton material. The fender is filled with compressed air and can float on the water. It serves as an important buffer medium between ship and ship berthing and between ship and wharf. At the same time, the inflatable rubber fender can absorb the impact energy of the ship's movement, reduce the ship's recoils, and greatly improve the safety of the ship's docking. With air as the medium, the compressed air is used to absorb the impact energy, so that the ship is flexible when docking, so as to achieve the effect of collision prevention and avoidance. Yokohama fenders has been widely used in oil tankers, container ships, engineering ships, ocean-going fishing boats, offshore platforms, large docks, military ports, large bridge piers and other ships and offshore platforms.

Inflatable rubber fender performance

Instructions for operation and maintenance

1. The maximum deformation of the inflatable fenders in the use process is 60% (except for special ship type or special operation), and the use pressure is 50KPa-80KPa (the use pressure can be determined according to the user's ship type, tonnage size, and near environment).

2. The inflatable fender of the ship should be used to avoid the puncture and scratch of sharp objects; And timely maintenance and maintenance, in general 5- 6 months for a pressure test.

3, often check the pneumatic rubber fender body for puncture, scratch. The surface objects in contact with the fenders shall not have sharp protruding hard objects to prevent puncturing the fender. When the fender is in use, the cable or chain or wire rope hanging the fender shall not be knotted.

4. When the fender is not used for a long time, it should be cleaned and dried, filled with appropriate amount of gas, and placed in a dry, cool and ventilated place.

5. The fender should be kept away from heat, and should not contact with acid, alkali, grease and organic solvent.

6, do not pile up when not in use, do not pile up heavy objects on the fender.

Schematic diagram of inflatable rubber fender

Compression deformation test of inflatable rubber fender

Picture of inflatable rubber fender

Service tenet:

Integrity management, quality first; Create a world famous brand, do a hundred years of enterprise;

Rigorous and pragmatic, considerate; Serve every user attentively.

After-sales service:

1. All products of the company are produced in strict accordance with ISO17357:2014 standards.

2, the company's products in normal use, the life of 8-10 years.

3, the company will carry out strict inspection on each product before leaving the factory, to ensure that all products without any quality problems before leaving the factory, so that every user can rest assured with.

4, the company's product quality warranty period of 2 years, quality problems occurred during the warranty period free repair or replacement.

5. Responsible for guiding repair and maintenance process, and long-term supply of repair materials and tools.

6. Instruct or participate in the implementation and application of products to various projects.

7. Provide pre-sale, in-sale and after-sale services