Changzhou Tianniu Transmission Equipment Co., Ltd
| Payment Terms | T/T, Western Union, MoneyGram, L/C, D/A, D/P |
| Supply Ability | 10000 per month |
| Delivery Time | 5-10working days |
| Packaging Details | Cartons by sea shipping by airplane |
| Name | GC-D Roller Type One Way Backstop Clutch |
| Material | GCR 15 Bearing Steel |
| Type | Sprag bearings |
| Width (mm) | 10-45 |
| Torque (Nm） | 29.4-2110 Nm |
| Weight (Kg) | 0.23-6 |
| Bore Size(mm) | 10-45 |
| Brand Name | Tianniu |
| Model Number | PB series |
| Place of Origin | China |
| Certification | ISO-9001 |
View Detail Information
Explore similar products
MX22 MX35 MX50 MX70 Backstop Clutch Bearing Press Freewheel Cam
RSCI Sprag Freewheel One Way Pump Overrunning Clutch Bearing
NF8 NF12 NF15 NF20 NF25 High Torque Backstop Clutch Sprag One Way Direction
NFS-K NSS30 Roller Ramp Sprag Clutch Freewheel For Inner Race High Speed
Product Specification
| Payment Terms | T/T, Western Union, MoneyGram, L/C, D/A, D/P | Supply Ability | 10000 per month |
| Delivery Time | 5-10working days | Packaging Details | Cartons by sea shipping by airplane |
| Name | GC-D Roller Type One Way Backstop Clutch | Material | GCR 15 Bearing Steel |
| Type | Sprag bearings | Width (mm) | 10-45 |
| Torque (Nm） | 29.4-2110 Nm | Weight (Kg) | 0.23-6 |
| Bore Size(mm) | 10-45 | Brand Name | Tianniu |
| Model Number | PB series | Place of Origin | China |
| Certification | ISO-9001 | ||
| High Light | PB 8 Clutch Tianniu ，PB 3 Clutch Tianniu ，sprag clutch backstop Cam Tianniu | ||
PB Sprag Type Overrunning Cam Clutch
Production introduction
A spherical plain bearing is a spherical plain bearing. Its sliding contact surface is an inner spherical surface and an outer spherical surface. It can rotate and swing at any angle during the movement. It is made by various special processing methods such as surface phosphating, pits, pad embedding, and spraying. The spherical plain bearing has the characteristics of large bearing capacity, impact resistance, corrosion resistance, wear resistance, self-aligning, good lubricity, etc
Installation
1. Concentricities of the inner race and the outer race are maintained by the plain bearing located between the outer race and the shaft. Radial load which works on the outer race is also supported by this plain bearing. The shaft must therefore be extended through the clutch outer race end.
2. Specify right (RH) or left hand (LH) inner race drive viewed from the end marked by the arrow in the illustration Above.Check if the rotation of the clutch is correct before being run-in.
3.Key to be used should be in accordance with JIS B1301-1959
4.The bore of the driven member, such as the sprocket on the clutch outer race, should meet H6 or H7 tolerance of the JIS standard.
5. For indexing use, oil lubrication is recommended.
Products Parameters
| Max. | Bore Size | Outer Race | Lubrication | |||||||||||||||
| Torque | Drag | Overrunning | Max. | Keyway | Filler Plug | |||||||||||||
| Model | Capacity | Torque | (r/min) | indexing | A | B | C | D | E | F | Weight | SizexPitch | ||||||
| (N@m) | (N@m) | Inner Race | Outer Race | (cycle/min) | Dia. | Keyway | (h7) | G | K | L | (kg) | |||||||
| (J7) | ||||||||||||||||||
| PB 3 | 29.4 | 0.2 | 1,800 | 900 | 150 | 10 | 4x1.5 | 50 | 50 | 23 | 22 | 25 | 21 | 25.7 | 4× 2.5 | 16 | 0.23 | M6× P1.0 |
| PB 5 | 147 | 0.2 | 1,800 | 900 | 150 | 16 | 5x2 | 70 | 60 | 32 | 32 | 35 | 25 | 38.8 | 5× 3.0 | 20 | 0.58 | M6× P1.0 |
| PB 6 | 382 | 0.2 | 1,500 | 800 | 150 | 20 | 5x2 | 82 | 73 | 38 | 38 | 37 | 33 | 41 | 5× 3.0 | 27 | 1.1 | M6× P1.0 |
| PB 8 | 568 | 0.29 | 1,200 | 650 | 150 | 25 | 7x3 | 85 | 83 | 45 | 40 | 45 | 33 | 42 | 7× 4.0 | 27 | 1.6 | M6× P1.0 |
| PB 10 | 843 | 0.39 | 1,000 | 400 | 150 | 31.5 | 10x3.5 | 92 | 95 | 60 | 41 | 56 | 37 | 44 | 10 × 4.5 | 28 | 2.5 | M6× P1.0 |
| PB 12 | 1530 | 0.39 | 800 | 300 | 150 | 40 | 10x3.5 | 100 | 113 | 65 | 50 | 66 | 37 | 52.6 | 10 × 4.5 | 29 | 3.6 | M6× P1.0 |
| PB 14 | 2110 | 0.59 | 700 | 300 | 150 | 45 | 12x3.5 | 112 | 133 | 75 | 54 | 76 | 41 | 57.3 | 12 × 4.5 | 30 | 6 | M6× P1.0 |
Company Details
Business Type:
Manufacturer,Exporter,Trading Company,Seller,Other
Year Established:
2007
Total Annual:
8,000,000-10,000,000
Employee Number:
50~100
Ecer Certification：
Verified Supplier
Changzhou Tianniu Transmission Equipment Co., Ltd is a professional one way clutch bearing supplier, the primary products are micro electromagnetic clutch, torque limiter coupling, sliding shaft coupling, flexible propeller shaft coupling, locking assembly and shaft couplings, etc.... Changzhou Tianniu Transmission Equipment Co., Ltd is a professional one way clutch bearing supplier, the primary products are micro electromagnetic clutch, torque limiter coupling, sliding shaft coupling, flexible propeller shaft coupling, locking assembly and shaft couplings, etc....
Get in touch with us
Leave a Message, we will call you back quickly!