NingBo ZhongYiDa IMP & EXP Co.,Ltd
| Payment Terms | T/T |
| Supply Ability | 100PCS / MONTH |
| Delivery Time | 30DAYS |
| Packaging Details | WOODEN PALLET |
| Water pressure set up range | 0.1-16Mpa |
| Work station | Two |
| Testing speed | 25s/pcs |
| Leak test accuracy | Leakage of 3 drops per minute |
| Pressure stable range | ±0.01MPa |
| Machine size | 850*650*1600mm |
| Voltage | 380V |
| Running average power | 1.0KW |
| Brand Name | ZYD |
| Model Number | ZYD-T05 |
| Certification | ISO9001 |
| Place of Origin | CHINA |
View Detail Information
Explore similar products
Easy Operate Material Testing Machines For Cartridge LifeTime 1500-2000pcs /
High Speed Intelligent Water Testing Equipment Atmospheric Water Flow For
High Test Speed Material Testing Machines , Mechanical Property Testing Machine
Laboratory Faucet Material Testing Machines , Flow Test equipment with normal
Product Specification
| Payment Terms | T/T | Supply Ability | 100PCS / MONTH |
| Delivery Time | 30DAYS | Packaging Details | WOODEN PALLET |
| Water pressure set up range | 0.1-16Mpa | Work station | Two |
| Testing speed | 25s/pcs | Leak test accuracy | Leakage of 3 drops per minute |
| Pressure stable range | ±0.01MPa | Machine size | 850*650*1600mm |
| Voltage | 380V | Running average power | 1.0KW |
| Brand Name | ZYD | Model Number | ZYD-T05 |
| Certification | ISO9001 | Place of Origin | CHINA |
| High Light | Flow Test Equipment ，Material Testing equipment | ||
ZYD-T05 Laboratory Ball Valve Life Time Testing Machine
Description:
Flow is a certain amount of time in a certain amount of time under a certain pressure, the common units are: L/min, that is, L. Americans commonly used GPM this flow unit, that is, gallons per minute, 1GPM=3.785L/min
Function:
1, flow and pressure can be adjusted;
2, the water temperature can be set, at room temperature to 90 C range can be arbitrarily set;
3, can be carried out 0.01MPa low voltage flow test;
4, touch screen display water temperature, flow, pressure value
5, generation time flow curve;
6, print test results.
Applicable products: faucet, shower hand, hose, angle valve, flow rate is not greater than 35L/min, the test pressure is less than 0.6MPa
Structure:
1, aluminum frame, flow test of water can be returned to the water tank;
2, water supply: stainless steel water tank + stainless steel multi-stage pump + pipe;
3, the pressure regulating part: the use of frequency converter to adjust the output pressure and flow;
4, flow test part: electronic digital flow meter, respectively, to detect the flow of cold water and hot water;
5, hot water tank: hot water tank installation of stainless steel heating pipe, automatic heating temperature control, internal water floating ball valve, drain pipe, overflow pipe, liquid level switch, water temperature to 80;
6, cold water tank: can be connected with the cold water machine, the internal water float valve, drain pipe, overflow pipe, liquid level switch, etc.;
7, temperature detection: each station of the hot water, cold water inlet pipe are installed temperature sensor, display the temperature unit is C, the index value is 0.1;
8, control system: PLC+ touch screen control, touch screen will show the flow of cold water and hot water, pressure and temperature, with thermal printer
Remarks:
1.Faucet flow testing stadard of china and american are both using normal temperature cold water
2, the European standard EN 817 for hot and cold water inlet pipe is respectively communicated with the cold water and hot water, cold water, 34 degrees, 38 degrees Celsius, 44 DEG C and hot water five temperature conditions in the detection of cold and hot water inlet flow, total flow is cold and hot water inlet and.
3, Australia standard taps in the use of cold water at room temperature were detected, the requirements of the first water 1 minute 500kPa, respectively in 150kPa, 250KPa and 350KPa several pressure detection flow, maximum flow value and minimum value difference of less than 2L / min.
4, hose flow test must be in a straight state, so the hose flow test equipment to use the hydraulic characteristics of the test machine for such a long time.
5, EN200 requirements under the pressure of 0.3MPa and 0.01MPa to carry out the flow test.
6, American Standard ASME A112.18.1 test method: using cold water for testing in 0.14 and 0.41MPa under pressure.
Installation conditions:
Venue:
1, a water inlet pipe and a drainage pipe, covers an area of about 4 square meters,
2 power: three-phase five wire, wire diameter 10m meters
Company Details
Business Type:
Manufacturer,Trading Company
Year Established:
2008
Total Annual:
1000000-2000000
Employee Number:
50~100
Ecer Certification：
Active Member
We,Ningbo ZhongYiDa IMP.&EXP. CO.,LTD,established in yuyao city,where is called china plumbing city,is one of moden high-tech multibusiness company. Integrates designing , production and marketing machinery . Such as drilling&tapping combi... We,Ningbo ZhongYiDa IMP.&EXP. CO.,LTD,established in yuyao city,where is called china plumbing city,is one of moden high-tech multibusiness company. Integrates designing , production and marketing machinery . Such as drilling&tapping combi...
Get in touch with us
Leave a Message, we will call you back quickly!