Payment Terms | T/T, L/C |
Supply Ability | 100PCS/MONTHS |
Delivery Time | Negotiate |
Packaging Details | Carton |
condition | new and original |
Manufacturer | Hokuyo |
Product No | UST-05LN |
Scan angle | 270° |
Scan speed | 25msec (motor speed 2400rpm) |
Angular resolution | 0.5° |
Insulation resistance | 10MΩ, DC 500V |
Protective structure | IP65 |
Brand Name | Hokuyo |
Model Number | UST-05LN |
Place of Origin | Japan |
View Detail Information
Explore similar products
Hokuyo UST-30LX Scanning Laser Range Finde Synchronous Output 1 Point
Hokuyo UAM-05LP-T301 Safety Laser Scanner Ethernet 100BASE-TX
Hokuyo DMS-HB1-V Optical Data Transmission Device/Parallel type
Hokuyo DMS-GB1-V Optical Data Transmission Device Used Infrared Data Transmissio
Product Specification
Payment Terms | T/T, L/C | Supply Ability | 100PCS/MONTHS |
Delivery Time | Negotiate | Packaging Details | Carton |
condition | new and original | Manufacturer | Hokuyo |
Product No | UST-05LN | Scan angle | 270° |
Scan speed | 25msec (motor speed 2400rpm) | Angular resolution | 0.5° |
Insulation resistance | 10MΩ, DC 500V | Protective structure | IP65 |
Brand Name | Hokuyo | Model Number | UST-05LN |
Place of Origin | Japan |
With a 5m range and 31 configurable area patterns the UST-05LN is an ideal solution for obstacle detection and collision avoidance where certified safety is not required or in personnel free zones for AMR and AGV type applications.
Features
• 2D scanner for measuring distance between the sensor and its surroundings.
• Supply voltage 10 to 30V
• The smallest and lightest of its kind
• Measurement distance, 5m
• Faster response, 66msec
• More flexible field setting available
Technical Parameter
Product name | Scanning Laser Range Finder |
Model | UST-05LN |
Supply voltage | DC 12V/DC 24V (operation range 10 to 30V, ripple within 10%) |
Supply current | 150mA (DC 24V) or less (during start up about 400mA is necessary.) |
Light source | Laser semiconductor (905nm), Laser class 1(IEC60825-1:2007, Accession number:1420210-000) |
Detection range and object | 60mm to 5000mm (white Kent sheet) |
60mm to 2000mm (diffuse reflectance 10% ) | |
Minimum detectable size 130mm (changes according to distance)*1 | |
Accuracy | 60mm to 5000mm ±40mm*2 |
Standard deviation | σ<20mm*2 |
Scan angle | 270° |
Scan speed | 25msec (motor speed 2400rpm) |
Angular resolution | 0.5° |
Start up time | Within 10 sec (start up time differs if malfunction is detected during start up) |
Outputs | Photo-coupler, open collector output Max DC 30V 50mA |
Output 1: Output 1 OFF during object detection | |
Output 2: Output 2 OFF during object detection | |
Output 3: Output 3 OFF during object detection | |
Malfunction output: ON during normal operation, OFF during malfunction | |
Synchronization output: Synchronization signal during Master/Slave operation. | |
Note: Output 1 to 3 are switched OFF during malfunction state | |
Inputs | Photo-coupler, common anode, power supply is 4mA when input is ON |
Input 1 to 5: Area switching inputs (refer Table1) | |
Synchronization input: Input synchronization signal during Slave operation. | |
Output response time*3 | OFF : 66msec to 3241msec |
ON : 66msec to 3241msec | |
Hysteresis | Hysteresis high (6.25%, not less than 60mm) |
Hysteresis low (3.125%, not less than 30mm) | |
No Hysteresis (Default) | |
Interface | USB |
LED display | Blue LED: ON during normal operation, |
blink during the start up, | |
Output 1 LED(Orange): ON during object detection | |
Output 2 LED(Orange): ON during object detection | |
Output 13LED(Orange): ON during object detection | |
Synchronization function | Master/Slave Synchronization mode is set using the configuration software*4 |
Slave synchronization mode (0°) | |
Slave synchronization mode (90°) | |
Slave synchronization mode (180°) | |
Slave synchronization mode (270°) | |
Ambient illumination | Less than 15,000lx |
Note : Avoid direct sunlight or other illumination sources as it may cause sensor malfunction | |
Ambient temperature and humidity | -10°C to +50°C, below 85%RH (without dew, frost) |
Storage temperature and humidity | -30°C to +70°C, below 85%RH (without dew, frost) |
Vibration resistance | 10 to 55Hz double amplitude of 1.5mm for 2hrs in each X, Y, and Z direction |
55 to 200Hz 98m / s2 sweep of 2min for 1hr in each X,Y and Z direction | |
Shock resistance | 196m/s2 (20G) each X,Y and Z direction 10 times. |
Insulation resistance | 10MΩ, DC 500V |
Protective structure | IP65 |
EMC standards | (EMI) |
EN61326-1:2013 | |
EN55011:2009 + A1:2010 | |
(EMS) | |
EN61326-1:2013 | |
EN61000-4-2:2009 | |
EN61000-4-3:2006 + A1:2008 + A2:2010 | |
EN61000-4-4:2012 | |
EN61000-4-6:2009 | |
EN61000-4-8:2010 | |
Weight | 130g |
Material | Upper case: Polycarbonate, Lower case: Aluminum |
Dimensions (W×D×H) | 50×50×70mm |
Related Product Recommendation:
UST-05LX | DMS-HB1-Z09 | BWF-11A |
UST-10LX | DMS-HB1-Z40 | BWF-11B |
UST-20LX | DMS-HB1-Z06 | PEY-155C |
UST-30LX | DMS-GB1-Z28 | DMS-GB1-P |
UST-05LN | DMJ-CN4-Z01 | DMS-HB1-P |
UAM-05LP-T301 | DMJ-HB1-Z01 | DML-HB1 |
DMS-HB1-V | EWF-11A | DMS-HA2-P |
DMS-GB1-V | EWF-11B | UAM-W002 |
DMS-HB2-V | BRC-G24T | DMG-HB1-Z09 |
Company Details
Business Type:
Trading Company
Year Established:
2017
Total Annual:
300000-800000
Employee Number:
12~20
Ecer Certification:
Verified Supplier
Xiamen Zhicheng Automation Technology Co., Ltd Xiamen Zhicheng Automation Technology Co., Ltd. Still Working And Able To Shipping Worldwide.We Are The Supplier For Industrial Automation Spare Parts.we Specialize In Plc Module, Dcs Card Pieces, Esd System C... Xiamen Zhicheng Automation Technology Co., Ltd Xiamen Zhicheng Automation Technology Co., Ltd. Still Working And Able To Shipping Worldwide.We Are The Supplier For Industrial Automation Spare Parts.we Specialize In Plc Module, Dcs Card Pieces, Esd System C...
Get in touch with us
Leave a Message, we will call you back quickly!