Xiamen ZhiCheng Automation Technology Co., Ltd
| Payment Terms | T/T, L/C |
| Supply Ability | 30pcs/month |
| Delivery Time | 3-5days |
| Packaging Details | new in box |
| Description | Acoposmicro Stepper Motor Module, X2x Link Interface, 24-64 Vdc |
| Warranty | 1year |
| B&R ID code | 0xA4A4 |
| Input voltage | 24 VDC ±25% |
| Inrush current | Max. 10 A |
| Undervoltage cutoff | <18 VDC |
| Overvoltage cutoff | >95 VDC |
| Line protection | Must occur externally |
| Nominal voltage | 24 VDC |
| Brand Name | B&R |
| Model Number | 80SD100XD.C0XX-01 |
| Place of Origin | Austria |
View Detail Information
Explore similar products
X20CP1586 | B&R | X20 CPU ATOM System module Controller
X20CM0985 | B&R | Analog inputs X20 energy measurement and synchronization
X20CP1583 B&R PLC Module Industrial Fanless Cooling with B R ID code 0xD45B
8SCS000.0000-00 B&R Shield.comp.set 1xSCHBL 1xSCH ACOPOSmulti shield component
Product Specification
| Payment Terms | T/T, L/C | Supply Ability | 30pcs/month |
| Delivery Time | 3-5days | Packaging Details | new in box |
| Description | Acoposmicro Stepper Motor Module, X2x Link Interface, 24-64 Vdc | Warranty | 1year |
| B&R ID code | 0xA4A4 | Input voltage | 24 VDC ±25% |
| Inrush current | Max. 10 A | Undervoltage cutoff | <18 VDC |
| Overvoltage cutoff | >95 VDC | Line protection | Must occur externally |
| Nominal voltage | 24 VDC | Brand Name | B&R |
| Model Number | 80SD100XD.C0XX-01 | Place of Origin | Austria |
Product Description
Material number:
80SD100XD.C0XX-01
Description:
Control for 2 stepper motors (2-phase bipolar, full bridge)
256 microsteps per step
2 trigger inputs
Motor holding brake connection
Enable input
Automatic motor identification
Holding, boost and continuous current can be defined independent of one another
ACOPOSmicro stepper motor module, X2X Link interface, 24-64 VDC ±25% power supply, 2 motor connections, 10 A continuous current, 2 digital inputs 24 VDC, sink, can be used as trigger inputs, 1 digital output 24 VDC, 1 A, order terminal blocks separately!
Product Information
Short description
| Stepper motor module | Connection for two stepper motors without encoder, 2-phase bipolar |
General information
| B&R ID code | 0xA4A4 |
| Status indicators | X2X Link, operating state, module status, motor information |
| Diagnostics |
|
| Module run/error | Yes, using LED status indicator and software |
| Module temperature / Cooling unit temperature | Yes, using software |
| Motor status | Yes, using LED status indicator and software |
| X2X Link | Yes, using LED status indicator |
| Electrical isolation |
|
| CPU - 24 VDC power supply | No |
| CPU - Power supply | Yes |
| CPU - Motor connection | Yes |
| CPU - Digital inputs | Yes |
| CPU - Enable inputs | Yes |
| CPU - Motor holding brake | No |
| CPU - X2X Link | Yes |
| Certifications |
|
| CE | Yes |
| Functional safety | Yes |
| UL | cULus E225616 |
| KC | Yes |
24 VDC power supply
| Input voltage | 24 VDC ±25% |
| Voltage monitoring | Yes |
| Power consumption |
|
| CPU | Max. 6 W |
| X2X Link power supply | Generated internally from the CPU power supply |
| Reverse polarity protection | Yes |
Power supply
| Input voltage | 24 to 64 VDC ±25% |
| Inrush current | Max. 10 A |
| Power consumption |
|
| Idle (no motor powered) | Max. 0.5 W |
| Full load | See diagram "Dimensioning - Power dissipation from the power unit for each powered axis" |
| Inrush current limiting | Yes, PTC (min. 9 Ω), is bypassed during operation by means of relay contact. |
| Undervoltage cutoff | <18 VDC |
| Overvoltage cutoff | >95 VDC |
| Voltage measurement | Yes |
| Line protection | Must occur externally |
| Reverse polarity protection | Yes |
Motor connection
| Quantity | 2 |
| Nominal current | 10 APeak |
| Max. current/motor | 15 APeak (2 s) |
| Max. current/module | 30 APeak |
| Nominal switching frequency | 38.5 kHz |
| Max. motor line length | 25 m |
| Step resolution | 256 microsteps per full step |
| DC bus capacitance | 940 µF |
Motor holding brake connection
| Quantity | 1 |
| Nominal voltage | 24 VDC |
| Input voltage | 24 VDC ±25% |
| Continuous current per connection | 1 A |
| Max. internal resistance | 0.3 Ω |
| Switching frequency |
|
| Resistive load | 100 Hz |
| Inductive load | See section "Switching inductive loads" |
| Protective measures |
|
| Overload and short-circuit protection | Yes |
| Open-circuit monitoring | No |
| Undervoltage monitoring | Yes |
| Max. overcurrent limiting | 8 A |
| Response threshold for undervoltage monitoring | ≤11 VDC |
| Reference potential | GND for module power supply (X2 terminal, pin 10) |
Interfaces
| X2X |
|
| Variant | 4-pin male connector |
| Min. X2X Link cycle time | 250 μs |
Enable inputs
| Quantity | 1 |
| Nominal voltage | 24 VDC |
| Input voltage | 24 VDC ±25% |
| Input current at nominal voltage | Typ. 60 mA |
| Input circuit | Sink |
| Switching threshold |
|
| Low | <5 VDC |
| High | >15 VDC |
| Switching delay at nominal input voltage |
|
| Enable 1 → 0, PWM off |
|
| Maximum | 450 ms (Rev. < L0: 452 ms) |
| Enable 0 → 1, ready for PWM |
|
| Maximum | 500 ms |
| Insulation voltage between input and bus | 500 Veff |
| Input capacitance | 10 nF (Rev. < L0: 100 µF) |
Digital inputs / Trigger inputs
| Quantity | 2 |
| Additional functions | Can be used as trigger input |
| Input circuit | Sink |
| Input voltage |
|
| Nominal | 24 VDC |
| Maximum | 30 VDC |
| Input current at nominal voltage | Approx. 7.5 mA |
| Input resistance | Approx. 3.2 kΩ |
| Switching threshold |
|
| Low | <5 VDC |
| High | >15 VDC |
| Switching delay |
|
| Rising edge | [Instant recording] Typ. 3 µs |
| Falling edge | [Instant recording] Typ. 4 µs |
| Electrical isolation |
|
| Input - ACOPOS | Yes, 500 Veff |
| Input - Input | Yes, 500 Veff |
| Modulation compared to ground potential | Max. ±38 V |
Operating conditions
| Mounting orientation |
|
| Horizontal | No |
| Vertical | Yes |
| Pollution degree per EN 61800-5-1 | 2 (non-conductive pollution) |
| Degree of protection per EN 60529 | IP20 |
Ambient conditions
| Temperature |
|
| Operation | 0 to 45 °C |
| Storage | -25 to 55 °C |
| Transport | -25 to 55 °C |
| Relative humidity |
|
| Operation | 5 to 85 %, non-condensing |
| Storage | 5 to 95%, non-condensing |
| Transport | 5 to 95%, non-condensing |
Mechanical properties
| Note | Order terminal blocks and cables separately! |
| Mounting/Cooling | Screw mounting with heat spreader on mounting plate or cold-plate. |
| Dimensions |
|
| Width | 65 mm |
| Height | 134 mm |
| Depth | 95 mm |
| Weight | 655 g |
| Backplane | Always mount on conductive and earthed backplane. |
Product Photo
More Products
| X20PS9600 | X20SO6300 | X20DC4395 |
| X20CP0483 | X20SLX210 | X20BT9100 |
| X20CP1483 | X20DI4371 | X20DI9371 |
| x20cp1586 | X20BM05 | X20AT6402 |
| X20CP1583 | X20BC0083 | X20AI4622 |
| X20CP3584 | X20BC8083 | x20at4222 |
| X20CP3583 | X20BB80 | x20bt9400 |
| X20CP1585 | X20BM11 | X20AT2222 |
| X20CP1584 | X20TB12 | X20AO4622 |
| X20CP1684 | X20IF1072 | X20DO9322 |
| X20CP1382 | X20DO6322 | X20IF1030 |
| X20AI1744 | X20DC2395 | X20IF1082-2 |
| X20DI6371 | X20BM15 | X20IF371 |
| X20DOF322 | X20DO4332 | X20CM4810 |
| X20DS4389 | X20DO4322 | X20AI83211 |
| X20PS2100 | X20MM2436 | X20DOF322 |
| X20PS9400 | X20DO8332 | X20PS3330 |
| X20CS1030 | X20DC11A6 | X20BM01 |
| X20CS1020 | X20CM8281 | X20SI9100 |
| X20ATC402 | X20BR9300 | X20SI4100 |
Cooperative Brand
(DCS)
ABB / TRICONEX / FOXBORO/ I/A / HONEYWELL / TDC2000/3000 / YOKOGAWA / BENTLY NEVADA
(PLC)
B&R / ALLEN BRADLEY / BECKHOFF / HONEYWELL / OMRON / SIEMENS
(SENSOR)
IFM / SICK/ P+F/ WENGLOR / BAUMER / LEUZE / HOLLY/ SYSHOKUYO / EUCHNER
(CONNECTOR)
HARTING / PHOENIX CONTACT/ WEIDMUELLER
(VALVE)
SMC / FESTO / +GF+.......
(INSTRUMENT)
+GF+ /E+H / HITACHI / ROSEMOUNT
Why Choose Us
Xiamen ZhiCheng Automation Technology Co., Ltd it is a leading global supplier of control system components. We specialize in control systems and drives. With many years of experience in the industrial sector, we consistently deliver the highest quality of spare parts. We have tens of thousands of spare partsand spare parts warehouse . Products and services to serve for installing of users control system,Distributed control systems, programmable controllers, panel controller and drive!
We major in DCS system,Sensor,PLC,Connector,Valve, and Instrument,MAGNETRON,RO Membrane. With many years of experience in the industrial sector, we consistently deliver the highest quality of spare parts.which make sure that all this jobs are perfectly. If you have any further questions, please don't hesitate to contact us.
How To Contact Me
Company Details
Business Type:
Trading Company
Year Established:
2017
Total Annual:
300000-800000
Employee Number:
12~20
Ecer Certification：
Verified Supplier
Xiamen Zhicheng Automation Technology Co., Ltd Xiamen Zhicheng Automation Technology Co., Ltd. Still Working And Able To Shipping Worldwide.We Are The Supplier For Industrial Automation Spare Parts.we Specialize In Plc Module, Dcs Card Pieces, Esd System C... Xiamen Zhicheng Automation Technology Co., Ltd Xiamen Zhicheng Automation Technology Co., Ltd. Still Working And Able To Shipping Worldwide.We Are The Supplier For Industrial Automation Spare Parts.we Specialize In Plc Module, Dcs Card Pieces, Esd System C...
Get in touch with us
Leave a Message, we will call you back quickly!