50mm-315mm HDPE Draining Fittings Siphonic Electrofusion Coupler PN6 PE100

Description of HDPE Siphon Fittings

CHUANGRONG HDPE siphon pipes provide a one-stop solution for drainage.

Contains HDPE siphon pipes, fittings, and metal fittings for fixing HDPE piping systems.

Siphon pipes and fittings are made of high-density polyethylene, it has significant advantages over tradi

-tional drainage systems. CHUANGRONG HDPE siphon pipe system has excellent mechanical properti

-es, physical properties and chemical properties. High impact and abrasion resistance

Resistors are very flexible and offer multiple connection options.

These comprehensive characteristics make it very suitable as a drainage material,

It satisfies the needs of building drainage well, and the stable quality ensures the safety of drainage

solutions.

Advantages of CHUANGRONG Siphon HDPE Pipe System for Drainage

1.CHUANGRONG High Density Polyethylene HDPE: Density 951 – 955 kg/m3

The density of polyethylene can be 910 – 960 kg / m3. CHUANGRONG fittings and pipes weighing

955.29 kg / m3, its characteristics not only have durability. And light weight, very convenient for tran

-sportation and installation.

2.Reduced reversion

Reduce shrinkage and improve installation strength. The HDPE replica produced by CHUANGRONG

manufacturing process is less than 15mm.

3.Resistance to cold

CHUANGRON siphon pipeline has anti-freezing performance. When the water in the pipeline is frozen,

Ordinary pipeline will freeze and crack, but CHUANGRONG HDPE will not.

4.Elasticity

In some applications, especially when the pipeline is exposed to vibration, earthquake or ground move

-ment subsidence, the flexibility of the pipe material prevents the pipe from breaking.

5.Resistance to radioactive effluents

There is no risk of damage caused by medical waste. However, for more information on specific applica

-tions, ask the manufacturer.

6.Resistance to abrasion

HDPE is highly abrasion resistant; its extra thick wall provides

Additional protection. Pipe abrasion resistance is a particularly important factor in branch pipes and sewers

Chimney and ground pipes. HDPE is highly abrasion resistant; its extra thick wall provides

Additional protection.

7.Heat expansion

The thermal expansion of HDPE also needs to be considered in the design and installation. As a rule

Thumb, for every 50 ° C increase in temperature, 15 mm expansion per meter of pipe can be expected.

8.Resistance to hot water

Geberit HDPE allows temperatures up to 100 ° C for short periods of time (such as steam surges), and

can be safely used as wastewater pipes without mechanical load up to 80 ° C.

9.Resistance to impact

CHUANGRONG HDPE is also very suitable for installation in

The parking lot and pedestrian zone are indestructible at room temperature. Its impact resistance is very

high. Even at extremely low temperatures (down to about -40 ° C).

10.Non-conductive

Plastic has good electrical insulator properties.

11.Sealing material

Refers to the Chemical Compatibility Guide or contact Geberit for help with the best connection method

because the chemical resistance of rubber seals is different from HDPE.

12.Solar radiation

Taking into account the heat and expansion of the exposed area, Geberit HDPE pipes can prevent UV-

induced aging and embrittlement, and added stabilizers.

13.Noise

HDPE limits solid conduction,

However, airborne noise should be isolated. HDPE is a soft material with low Young's modulus. This can

be done through pipes or lagging.

14.Chemical resistance

CHUANGRONG HDPE has high chemical resistance: HDPE is only soluble in aliphatic and aromatic car

-bon and its chlorinated products exceeding 90 ° C, and insoluble in all solutions at 20 ° C. The material

will be exposed to severely oxidized media (concentration HN03, concentrated H2 S04) for a long time at

room temperature.

15.Tightness

After proper installation

The joints will remain watertight for the life of the building. Because years of experience in welding HDPE

pipes have shown that butt and electric fusion

The weld forms a stronger watertight joint than the pipe.

16.Protection against blockages

Solid deposits and low flow of water cause low surface tension and hydrophobicity of HDPE to prevent

Clogged.

17.Welding temperature

The welding temperature of HDPE is about 230 ° C, which makes welding easier and more reliable than

other connection methods. Compared to many other materials, HDPE requires low energy input to produce.

18Non-toxic

HDPE siphon pipes do not contain toxic substances. This material is even very suitable for use as packaging

materials and containers in the food industry.

19.Not suitable to Painting.

HDPE is not suitable for painting. Its water repellency and flexibility. Materials limit the adhesive properties

of coatings. If unavoidable, paint the product to be used should be tested for compatibility with HDPE.
20.Smooth inner wall, and does not change with time, small frictional resistance,save energy, the pres

-sure loss about 30% smaller than the steel tube,can choose smaller than steel pipe diameter. Health

performance is good, no additives, no possibility of pollution of drinking water, ISO standard grading

polyethylene material level 0 (the lowest), no mildew material, compared with some other commonly

used plastic material of polyethylene is much mildew resistance, use for a long time also not fouling.

21.Polyethylene pipe can be welded joint with pipe become an organic whole, without the possibility

of joint leakage, water saving, reducing operation cost and maintenance cost examination, pipe can

be manufactured in any length, but the flexible layout, saving fittings.
22.PE pipe installation available welding or fused to form a completely closed seepage control system.