600 Kg Compressed Air Dryer Dew Point Control Technology Easy Maintain

Product Specification

CSG Series Dehumidifying Dryer with Dew Point Control Technology

Dehumidifying Dryer

CSG series is a fully automatic drying system with zeolite desiccant beds, which is the combination of Hopper Bank Series and Dry Air Generater Series. It can automatically adjust and control operating
parameters based on the type and quantity of polymer.

Main Advantages

1.Automatic dew point control system: not switch to new desiccant bed before the dew point gets -20°C.

2.Three beds dryer can ease the burden of regeneration fan, improve the drying effect and reduce the energy consumption

3.Self-adaptive PID temperature control from 60℃ to 300℃

4.No need of manual control, full auto-adaptive operation

5.No use of cooling water

6.No moving or rotating internal parts

7.Diagnostic functions,Dewpoint, heater, and temperature alarm

8.Visual and audible alarms available

9.On-board heating unit on hopper saving energy

10.Sturdy, well proven design for extended operational life

Dew Point Technology

Instead of superficial time control, now we precisely control our pneumatic value on the basis of dew point.
It’s the energy consumption solution with highest cost performance.

                                                  ( a )

If the moisture content of raw material is really high, the dew
point could have already get -20oC in less than 2 hour.
Then,in the next hour before the pneumatic value
working, the drying effect is significantly decreased due
to the much higher dew point.

                                                  (  b )

f the moisture content of raw material is really low,
the dew point could still be above -20oC after three hours.
However, the pneumatic value has to switch every three
hour, thus the energy is wasted due to the earlier regeneration.

FAQ

Q1: Which city are you in? How can I get to your factory? Are you a trading company or factory?
A1: We are in Zhangjiagang city, two hours driving from Shanghai. We are a factory, manufacturing mainly plastic dryer machines. We offer turnkey solutions including conveying, drying and mixing with more than 10 years experience.

Q2: What is your delivery time?
A2: Normally no more than 40 working days.

Q3: How to install my machines when it arrives? How much the cost?
A3: We will send our engineers to your factory to install the machines and train your staff how to operate the machines If needed. Or you can arrange engineers to study in our factory.
You are responsible for air tickets, accommodation and our engineer wage USD100/day/person.

Q4: What is your guarantee?
A4: We have one year guarantee and life-long technical support. Our service also including machine maintaince.

Q5: What is your payment term?
A5: 30%T/T in advance as down payment, rest should be paid before shipping. L/C is supported also.