shanghai Guangsu Manufacture Co.ltd
| Application | Bottle |
| Automatic | Yes |
| Voltage | 380v 3Phase /220v 3Phase |
| After-sales Service Provided | Overseas third-party support available |
| max volume of product | 2L |
| mold cavity | 2cavitier |
| competitive advantages | stable performance with advanced PLC |
| capacity | automatic preform conveyer to save human cost |
| Place of Origin | Shanghai, China (Mainland) |
| Brand Name | GS |
| Model Number | CM-A2 |
| Certification | ISO9001:2000 |
View Detail Information
Explore similar products
2L Plastic Pet Bottle Making Machine / Mineral Plastic Bottle Moulding Machine
Three Layer Co Extrusion Blow Molding Machine , Pet Bottle Preform Making
Semi Automatic Plastic Bottle Blowing Machine For Producing PET Containers CM-8Y
Precision Injection Stretch Blow Molding Machine , Drinking Water Bottle Making
Product Specification
| Application | Bottle | Automatic | Yes |
| Voltage | 380v 3Phase /220v 3Phase | After-sales Service Provided | Overseas third-party support available |
| max volume of product | 2L | mold cavity | 2cavitier |
| competitive advantages | stable performance with advanced PLC | capacity | automatic preform conveyer to save human cost |
| Place of Origin | Shanghai, China (Mainland) | Brand Name | GS |
| Model Number | CM-A2 | Certification | ISO9001:2000 |
| High Light | pet bottle manufacturing machine ，pet bottle blow molding machine | ||
Geomembrane Film Blowing Machine CM-A2
Project name: A2 Two Cavity Automatic Blow Molding Machi
A2 Automatic Blow Molding Machine
CE Certification ISO9001:2000
Engineering item:
Description:
Technique Parameter of blow molding machine:
|
Main part: |
||
|
Pneumatic part |
Valve |
SMC |
|
Cylinder |
||
|
Electric part |
PLC |
LG Mitsubishi |
|
Operating system |
LG /HITECH |
|
|
Relay |
OMRON |
|
|
Infrared thermometer |
America raytek |
|
|
Note |
All of the electrical components adopts CE,UL,CCC approved international advanced high-tech product. |
|
|
Main parameter: |
||
|
Model |
A2 |
|
|
Productivity |
Depend on bottle design |
1800-2000PCS/H |
|
Product type |
Body diameter |
20mm-100mm |
|
Height |
50mm-350mm |
|
|
Neck diameter |
15mm-38mm |
|
|
Mold |
Cavity |
2cavities |
|
Mold thick |
240mm |
|
|
Mold |
500*500mm |
|
|
Main machine power |
Electrical source power |
380v 3Phase /220v 3Phase 50/60HZ |
|
Power |
25kw |
|
|
Really use power |
6kw |
|
|
Air source |
LP air compressor |
1.0m3/min 1.0MPa 1set (7.5KW) |
|
HP air compressor |
0.7m3/min 3.0MPa 2sets (each set 9KW) |
|
|
Air dryer |
1.0m3/min 3.0MPa 1set |
|
|
Cooling water |
Cooling water |
10L/min |
|
Size |
L*W*H |
1908*1280*1920mm |
|
Weight |
2000kg |
|
|
Auxiliary equipment(preform unscrambler) |
L*W*H |
276*106*186mm |
|
Weight |
250kg |
|
|
Resin available |
|
PET |
Trait:
CM-A2 Full automatic blow molding machine is suitable for producing PET/PE and PP plastic containers and bottles in all shapes. It is widely used to produce the carbonated bottle, mineral water, pesticide bottle oil bottle cosmetics, wide-mouth bottle and hot fill bottle etc.
Features of main body:
1). Stable performance with advanced PLC.
2). Automatic preform conveyer to save human cost.
3). Preform self-rotation and infrared pre-heater revolution assure the even distribution of heat, which improve the bottle shaping rate, increase the production.
4). Strong clamping force with high pressure and double crank links to lock the mould.
5). Two ways of operating: automatic and manual.
6). Safe,reliable and unique design of the position of valve to make the pneumatic diagram in the machine easier to understand.
7). Low cost,high efficiency,easy operation and maintenance etc, profited from the fully automatic technological process.
8). Ideal cooling system make the finished bottles without any flaws.
9). Easy for you to install,test and start up.
10). Low rejection rate: less than 0.2 percent.
Service:
Provide whole drawing for the perform mould and bottle mould. Free charge for word design on the mould. We can help you install the machine; from setting machine, testing, and to check the machine is on the good working condition. There is a litter charge, only for flight charge and accommodation.
Delivery time:
45 days upon deposit and approval to the bottle drawing.
Payment:
For machine:50% T/T deposit within five days after the contract is signed against invoice of the seller. The balance of 50% will be paid before shipmment.
Attached:
Functions of auxiliary equipments:
(1) Air compressor is the air source for PET stretch blow molding machine, carrying out the process of compressing air from atmosphere to the required pressure.
(2) Air dryer is to remove the moisture from the compressed air and lower temperature of the compressed air in the heat exchanger.
(3) Air filter is to clear up the impurities out of the compressed air, like carbon-hydrogen, tiny dust and solid particles.
(4) Air tank is to receive and supply air for the machine as storage.
COMPANY
Following the principle of "Technology oriented,Management innovation,Quality first and Customer uppermost",the company is continuing to enhance the development capacity,focusing on the development of a series of products with leading level at home and surpassing the international level,making it the new highlight of economic growth of the company.At the same time,the company has launched a series of new measures in the aspect of management and quality control,and strengthened the cooperation with the domestic and international scientific research institutes and famous enterprise to build the "GS" brand.Under the leadship of the company,all the staffs have decided to carry on the spirit of "Union,Struugle,Practice,Devotion,Innovation and Development" leading the company to a first-class famous enterprise.
Glorious GS,Steer the flourishing future.We welcome all domestic and international customers to visit us and give us intructions.Just as what we did before,we shall continue to try our level best to provide our customers with professional and considerate service to gain the confidence and support from both the old and new customers.
Company Details
Business Type:
Manufacturer
Year Established:
2004
Total Annual:
14000000-16000000
Employee Number:
100~200
Ecer Certification：
Active Member
Shanghai-Plastic Machinery Manufacturing Co., Ltd. is located in Shanghai's Songjiang Science and Technology Park, with a total area of 238 acres. Its transportation is very convenient, located in the Shanghai-Hangzhou Expressway and the same three motorway at the exit port, and is adjacent to t... Shanghai-Plastic Machinery Manufacturing Co., Ltd. is located in Shanghai's Songjiang Science and Technology Park, with a total area of 238 acres. Its transportation is very convenient, located in the Shanghai-Hangzhou Expressway and the same three motorway at the exit port, and is adjacent to t...
Get in touch with us
Leave a Message, we will call you back quickly!