shanghai Guangsu Manufacture Co.ltd
| Application | Bottle |
| Blow Moulding Type | Injection Blow Moulding |
| Automatic | Yes |
| product material | PET |
| theoretical output | 3000PCS/H |
| competitive advantages | automatic preform conveyer to save human cost |
| application | produce wide-mouth bottle and hot fill bottle etc |
| system | reasonable design, full automatic control, save power and labor |
| Place of Origin | Shanghai, China (Mainland) |
| Brand Name | GS |
| Model Number | CM-A4 |
| Certification | ISO9001:2000 |
View Detail Information
Explore similar products
2L Plastic Pet Bottle Making Machine / Mineral Plastic Bottle Moulding Machine
Three Layer Co Extrusion Blow Molding Machine , Pet Bottle Preform Making
Semi Automatic Plastic Bottle Blowing Machine For Producing PET Containers CM-8Y
Precision Injection Stretch Blow Molding Machine , Drinking Water Bottle Making
Product Specification
| Application | Bottle | Blow Moulding Type | Injection Blow Moulding |
| Automatic | Yes | product material | PET |
| theoretical output | 3000PCS/H | competitive advantages | automatic preform conveyer to save human cost |
| application | produce wide-mouth bottle and hot fill bottle etc | system | reasonable design, full automatic control, save power and labor |
| Place of Origin | Shanghai, China (Mainland) | Brand Name | GS |
| Model Number | CM-A4 | Certification | ISO9001:2000 |
| High Light | pet bottle manufacturing machine ，pet bottle blow molding machine | ||
High-Speed Pet Blow Molding Machines CM-A4
Project name: A4 Hot Filling Automatic Blow Molding Machine
Engineering item:
Description:
Technique Parameter of blow molding machine:
|
Main part: |
||
|
Pneumatic part |
Valve |
SMC |
|
Cylinder |
||
|
Electric part |
PLC |
LG Mitsubishi |
|
Operating system |
LG /HITECH |
|
|
Relay |
OMRON |
|
|
Infrared thermometer |
America raytek |
|
|
Note |
All of the electrical components adopts CE,UL,CCC approved international advanced high-tech product. |
|
|
Main parameter: |
||
|
Model |
CM-A4 |
|
|
Productivity |
Depend on bottle design |
3000PCS/H |
|
Product type |
Body diameter |
20mm-100mm |
|
Height |
50mm-350mm |
|
|
Neck diameter |
15mm-38mm |
|
|
Mold |
Cavity |
4cavities |
|
Mold thick |
240mm |
|
|
Mold |
500*500mm |
|
|
Main machine power |
Electrical source power |
380v 3Phase /220v 3Phase 50/60HZ |
|
Power |
49kw |
|
|
Really use power |
14kw |
|
|
Air source |
LP air compressor |
2.0m3/min 1.0MPa |
|
HP air compressor |
2.0m3/min 4.0MPa |
|
|
Air dryer |
2.0m3/min 4.0MPa 1set |
|
|
Cooling water |
Cooling water |
15L/min |
|
Size |
L*W*H |
1908*1858*1920mm |
|
Weight |
3600kg |
|
|
Auxiliary equipment(preform unscrambler) |
L*W*H |
276*106*186mm |
|
Weight |
250kg |
|
|
Resin available |
|
PET |
Trait:
A4 Full automatic blow molding machine is suitable for producing PET plastic containers and bottles in all shapes. It is widely used to produce the carbonated bottle, mineral water, pesticide bottle oil bottle cosmetics, wide-mouth bottle and hot fill bottle etc.
Reasonable design, full automatic control, save power and labor. Adopt high quality components,
Feeding system carries the performs by robot automatically.
Infrared oven heater adopts the quartz lamp to heat the PET tube.
Fully automatic process with low investment, high efficiency, quick and safe operation, easy for trouble-shooting, maintenance and other benefits.
Features of main body:
1). Stable performance with advanced PLC.
2). Automatic preform conveyer to save human cost.
3). Preform self-rotation and infrared pre-heater revolution assure the even distribution of heat, which improve the bottle shaping rate, increase the production.
4). High adjusting performance to enable preheat the preforms perfectly by adjust the voltage control area in the PLC, which could adjust the temperature of the infrared lights in the pre-heater, and keep the proper temperature and humidity invariable.
5). High safeties with security automatic-locking device in each mechanical action, which will make the production into a perfect safe environment, in case of the breakdown in certain procedure.
6). Introduce the FESTO air cylinder to avoid contamination and noise.
7). Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.
8). Strong clamping force with high pressure and double crank links to lock the mould.
9). Two ways of operating: automatic and manual.
10). Safe,reliable and unique design of the position of valve to make the pneumatic diagram in the machine easier to understand.
11). Low cost,high efficiency,easy operation and maintenance etc, profited from the fully automatic technological process.
12). Ideal cooling system make the finished bottles without any flaws.
13). Easy for you to install,test and start up.
14). Low rejection rate: less than 0.2 percent.
COMPANY
Modernized garden type factory, first-rate hardware equipment,professional science &technology team and perfect management system, ensure the outstanding product performance of "GS".
Following the principle of "Technology oriented,Management innovation,Quality first and Customer uppermost",the company is continuing to enhance the development capacity,focusing on the development of a series of products with leading level at home and surpassing the international level,making it the new highlight of economic growth of the company.At the same time,the company has launched a series of new measures in the aspect of management and quality control,and strengthened the cooperation with the domestic and international scientific research institutes and famous enterprise to build the "GS" brand.Under the leadship of the company,all the staffs have decided to carry on the spirit of "Union,Struugle,Practice,Devotion,Innovation and Development" leading the company to a first-class famous enterprise.
Glorious GS,Steer the flourishing future.We welcome all domestic and international customers to visit us and give us intructions.Just as what we did before,we shall continue to try our level best to provide our customers with professional and considerate service to gain the confidence and support from both the old and new customers.
Certification
ISO9001:2000 CE Certification
Company Details
Business Type:
Manufacturer
Year Established:
2004
Total Annual:
14000000-16000000
Employee Number:
100~200
Ecer Certification：
Active Member
Shanghai-Plastic Machinery Manufacturing Co., Ltd. is located in Shanghai's Songjiang Science and Technology Park, with a total area of 238 acres. Its transportation is very convenient, located in the Shanghai-Hangzhou Expressway and the same three motorway at the exit port, and is adjacent to t... Shanghai-Plastic Machinery Manufacturing Co., Ltd. is located in Shanghai's Songjiang Science and Technology Park, with a total area of 238 acres. Its transportation is very convenient, located in the Shanghai-Hangzhou Expressway and the same three motorway at the exit port, and is adjacent to t...
Get in touch with us
Leave a Message, we will call you back quickly!