shanghai Guangsu Manufacture Co.ltd
| Payment Terms | L/C, T/T |
| Supply Ability | 1 set per month |
| Packaging Details | wooden case for shipping by sea |
| After-sales Service Provided | Engineers available to service machinery overseas |
| Power | 16.9kw |
| Opening Stroke | 540mm |
| Clamping Force | 2580KN |
| Injection Rate | 140~202g/s |
| Injection Weight | 536~772g |
| Automatic | Yes |
| Plastic Type | Thermosetting |
| Brand Name | GS |
| Model Number | GS608HS |
| Certification | CE IS09001 |
| Place of Origin | Shanghai(China) |
View Detail Information
Explore similar products
Plastic Case Making 200 Ton Injection Molding Machine Power Saving
Horizontal Energy Saving Servo Motor Injection Molding Machine Thermosetting
Aluminum Plastic Recycling 130 Ton Injection Molding Machine 81~123g/S Rate
High Efficiency Servo Motor Injection Molding Machine Low Noise Easy Operation
Product Specification
| Payment Terms | L/C, T/T | Supply Ability | 1 set per month |
| Packaging Details | wooden case for shipping by sea | After-sales Service Provided | Engineers available to service machinery overseas |
| Power | 16.9kw | Opening Stroke | 540mm |
| Clamping Force | 2580KN | Injection Rate | 140~202g/s |
| Injection Weight | 536~772g | Automatic | Yes |
| Plastic Type | Thermosetting | Brand Name | GS |
| Model Number | GS608HS | Certification | CE IS09001 |
| Place of Origin | Shanghai(China) | ||
| High Light | thermoplastic injection molding machine ，hydraulic injection moulding machine | ||
Full Automatic Servo Motor Injection Molding Machine for Basket,Bucket,Planter
Technical parameters:
| INJECTION UNIT | GS258 | A | B | C | D |
| Screw Diameter | mm | 80 | 85 | 90 | 100 |
| Length/Diameter Ratio | L/D | 21.2 | 20 | 18 | 17.6 |
| Theoretical Shot Volume | cm3 | 2362 | 2667 | 2990 | 3691 |
| Injection Weight(PS) | g | 2150 | 2427 | 2721 | 3359 |
| Theoretical Injection Pressure | Mpa | 184 | 163 | 146 | 118 |
| Injection Rate(PS) | g/s | 403 | 455 | 510 | 629 |
| Plasticizing Capacity | g/s | 79 | 95 | 110 | 141 |
| Maximum Screw Speed | rpm | 0-120 | |||
| Injection Stroke | mm | 470 | |||
| Clamping Unit | |||||
| Clamp Tonnage | kN | 6080 | |||
| Toggle Stroke | mm | 900 | |||
| Space Between Iie Bars (HxV) | mm | 880x880 | |||
| Max. Mold Height | mm | 880 | |||
| Min. Mold Height | mm | 350 | |||
| Daylight Opening | mm | 1780 | |||
| Ejector stroke | mm | 240 | |||
| Ejector tonnage | kN | 158 | |||
| Ejector Number | piece | 21 | |||
| OTHERS | |||||
| System Pressure | Mpa | 16 | |||
| Pump moter Power | kW | 30+30 | |||
| Heater Power | kW | 44.3 | |||
| Machine Dimension(LxWxH) | m | 8.81*2.27*2.45 | |||
| Machine Weight | t | 23 | |||
| Hopper Capacity | Kg | 100 | |||
| Oil tank Capacity | L | 110 | |||
| LUBRICATION SYSTEM | |
| The following should be focused on when using the lubricating oil:
| |
| • Proper lubrication will lengthen the service life;on the contrary ,poor lubrication will result in the wear and heat of parts.The clamping unit of the machine employs auto central lubricating device,and the other necessary moving parts have grease nipples for lubrication. Lubrication oil is an important factor of the machine.No operation without lubricating,otherwise the equipment will be seriously damaged. | |
| SAFE SYSTEM | |
|
• The safety devices include safety door and locking-self mechanism.All safety doors are very important to avoid personal to damage by splashing melted material and prevent person from dangers zone.The locking-self mechanism will stop all damage action at any door opening. • The safety door limit switch serves to interrupt the mold closing.When the safety door is open,limit switch has been activated to brek the circuit.Its dual circuit control functions of Normally closed and Normail open can stop the motion of the machine. |
| In case of any accident or error in the process of operation,first press the emergency stop button (the red projectied one on the lower right corner of the screen),and then turn off the main power supply switch.Find out the causes of fault and do not start the machine until all faults have been rectified. | |
Company Details
Business Type:
Manufacturer
Year Established:
2004
Total Annual:
14000000-16000000
Employee Number:
100~200
Ecer Certification：
Active Member
Shanghai-Plastic Machinery Manufacturing Co., Ltd. is located in Shanghai's Songjiang Science and Technology Park, with a total area of 238 acres. Its transportation is very convenient, located in the Shanghai-Hangzhou Expressway and the same three motorway at the exit port, and is adjacent to t... Shanghai-Plastic Machinery Manufacturing Co., Ltd. is located in Shanghai's Songjiang Science and Technology Park, with a total area of 238 acres. Its transportation is very convenient, located in the Shanghai-Hangzhou Expressway and the same three motorway at the exit port, and is adjacent to t...
Get in touch with us
Leave a Message, we will call you back quickly!