ZHEJIANG TOP BEARINGS CO., LTD.
| Payment Terms | T/T |
| Supply Ability | negotiated |
| Delivery Time | negotiated |
| Packaging Details | Cartons or Pallets |
| Material | ZrO2 |
| Density | 6.0 g/cm3 |
| Material of Rings & Balls | Full ZrO2 ceramic material |
| HV Hardness | 1300 HRC |
| Coefficient of expansion | 1.50 10^-6/℃ |
| The highest temperature | 500℃ |
| Brand Name | TOB Ceramic Bearings |
| Certification | ISO 16949 |
| Place of Origin | China |
View Detail Information
Explore similar products
ZrO2 Ceramic Plain Bearings Ball Anti-Canker No Magnetism Isolation For
Al2O3 Ceramic Plain Bearings Ceramic Ball , At 1100℃ Density Is 3.7-3.99g/cm3
Precision Glass Balls 75% SiO2 , 15% NaO2 , 8% CaO2 Density Is 2.8g/Cm3 ,
Si3N4 Ceramic Balls For Bearings High Intension Wearing Anti-Canker, Alkali
Product Specification
| Payment Terms | T/T | Supply Ability | negotiated |
| Delivery Time | negotiated | Packaging Details | Cartons or Pallets |
| Material | ZrO2 | Density | 6.0 g/cm3 |
| Material of Rings & Balls | Full ZrO2 ceramic material | HV Hardness | 1300 HRC |
| Coefficient of expansion | 1.50 10^-6/℃ | The highest temperature | 500℃ |
| Brand Name | TOB Ceramic Bearings | Certification | ISO 16949 |
| Place of Origin | China | ||
| High Light | ceramic ball bearings ，ceramic balls for bearings | ||
Full Complement Balls Of ZrO2 Ceramic Bearings, Full Ceramic Bearings
Full Ceramic Bearings of full complement balls of ZrO2 material has an add-ball gap on its side. Because using no cage design, Full Complement Balls Of ZrO2 Ceramic Bearings is able to install more ceramic balls than the standard construction, so the heavier radial load ability could be increased more. In addition, to avoid the limited of the cage material, Full Complement Balls Of ZrO2 Ceramic Bearings has more corrosion resistance and higher temperature application than the full ceramic bearing of ceramic cage. This series of Full Complement Balls Of ZrO2 Ceramic Bearings is not for high-speed circumgyration, so the side with gap shouldn’t be installed on enduring axial load side. As there are add-balls gaps in the inner and outer rings, Full Complement Balls Of ZrO2 Ceramic Bearings couldn’t be used in more axial load application. The highest temperature of recommendation is 500℃.
| Comparison of bearing material technical data | ||||||
| Technical data | unit | GCr15 | 9Cr18 | Si3N4 | AL203 | ZrO2 |
| Density | g/cm³ | 7.8 | 7.9 | 3.2 | 3.95 | 6 |
| a Coefficient of expansion | 10^-6/℃ | 11 | 17 | 3.2 | 9.1 | 10.5 |
| E modulus of elasticity | Gpa | 208 | 200 | 320 | 380 | 210 |
| μ Poisson ratio | 0.3 | 0.3 | 0.26 | 0.27 | 0.3 | |
| HV Hardness | 800 | 700 | 1700 | 1800 | 1300 | |
| δ Flexural strength | Mpa | 2400 | 2600 | 900 | 220 | 1000 |
| δ Compressive Strength | MPa | 2000 | 1500 | 3500 | ||
| Kc Impact strength | Nm/cm² | 20 | 25 | 7 | 3.5 | 11 |
| λ Thermal conductivity | W/mk | 30-40 | 15 | 3.5 | 25 | 2.5 |
| Ω Specific resistivity | mm²/m | 1 | 0.75 | 10^18 | 10^8 | 10^5 |
| Specific heat | J/KgK | 450 | 450 | 800 | 880 | 400 |
| Application temperature | ℃ | 120 | 150 | 1000 | 1850 | 800 |
| Anti-corrossion | No | poor | Good | Good | Good | |
| Cycle stress | 10*10^6 | 10*10^6 | 50*10^6 | 30*10^6 | 50*10^6 | |
| Destroy model | peel | peel | peel | fracture | peel/fracture | |
| Anti-magnetism | Yes | Yes | No | No | No | |
| Dimension stability | bad | poor | Good | Good | Good | |
| Insulate properties | No insulation | No insulation | Good | Good | Good | |
| Basic properties of staple engineer plastic | ||||||||
| Material | HDPE | PP | POM | PA66 | PVDF | PPS | PTFE | PEEK |
| Long-time working temp. | 90 | 100 | 110 | 100 | 150 | 230 | 260 | 280 |
| Density | g/cm3 | 0.91 | 1.42 | 1.14 | 1.77 | 1.35 | 2.18 | 1.32 |
| Ball indentation hardness | 50 | 80 | 170 | 170 | 80 | 190 | 30 | |
| Tensile stress | 25 | 30 | 70 | 80 | 50 | 75 | 25 | 95 |
| Sliding friction coefficient | 0.29 | 0.3 | 0.34 | 0.35-0.42 | 0.3 | 0.08-0.1 | 0.3-0.38 | |
| Melted temperature | 130 | 165 | 175 | 260 | 172 | 280 | 327 | 343 |
| Short-time highest application temperature | 90 | 140 | 150 | 170 | 150 | 260 | 260 | 300 |
| Coet of Inear expansion (10^-5/K) | 13-15 | 17 | 10 | 8 | 13 | 5 | 12 | 5 |
| Dielectric constant at 1 Mhz(10^6HZ) | 2.4 | 2.25 | 3.7 | 3.6-5 | 8 | 2.1 | 3.2-3.3 | |
| Volume resisrivity (Ω·cm) | >10^15 | >10^24 | >10^14 | 10^13 | 10^12 | >10^13 | 10^14 | 10^13 |
| flammability UL94 | + | + | - | (+) | (+) | - | + | + |
| Anti-weathering | - | - | - | - | - | - | + | - |
| Note: + =resistant; (+) =partly resistant; - =non-resistant | ||||||||
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Exporter,Trading Company,Seller
Year Established:
2004
Total Annual:
1000000-3000000
Employee Number:
100~300
Ecer Certification：
Verified Supplier
ZHEJIANG TOP BEARINGS CO., LTD. is a manufacturer and distribution of sliding bearings. Our products have been widely applied to more than 30 industries like automobile, engineering machinery, metallurgy, water conservancy and hydroelectric power and mechanical manufacturing. Also we can design for ... ZHEJIANG TOP BEARINGS CO., LTD. is a manufacturer and distribution of sliding bearings. Our products have been widely applied to more than 30 industries like automobile, engineering machinery, metallurgy, water conservancy and hydroelectric power and mechanical manufacturing. Also we can design for ...
Get in touch with us
Leave a Message, we will call you back quickly!