Product Specification

POM Plain Composite Bearings Bushings Units & Housings Thrust Washers

Flanged Sleeve Bearing

Plain Composite Bearings Flangeg Bushings Units & Housings Thrust Washers Strips grease-lubricated material made-to-order from china self-lubricating bearing combining dry & mechanical properties of metal & PTFE. Cylindrical & flanged self-lubricating bushings.Bearings standard: ISO3547, DIN 1494.Metric bearings and imperial bushings made to order: standard bushing forms in special dimensions, half-bushings, special shapes obtained by stamping, bearings with locating notches, lubricant holes and machined grooves, customized bushing designs.

Wrapped Bushes With Grease Pockets (DIN 1494)

Bushings, thrust washers and strips supplier.Blocks and Thrust Plates ... TOP BEARINGS bradn bearing material is known by various names such as DX-10 or DX10. Buying a sf-1 bearing from TOP BEARINGS or its authorized distributors guarantees that you do not receive a counterfeit product. ...POM coated bearing is a standard item of our company. This type self-lubricating bushing has same material structure with other DX bushing. It's also called boundary lubricating bearing,DX bearing,SF-2 oilless bearing,plain sliding bearing and dry bushes.

Boundary lubricated lead-free bearing is improved from black POM.Its performance is the same as the black POM, but the surface does not contain lead, the use of the field can be extended to environmental requirements of the field.At present, the product has been used in imported textile equipment, plunger pump swing position, automobile joystick position and other medium load, medium speed, grease lubrication occasions.

WASHER SIZE CHART

WASHER SIZE CHART

Boundary Lubricating Bearing Material Structure

1. POM 0.3~0.5mm.
2. Porous bronze 0.2~0.3mm.
3. Steel backing 0.4~2.2mm.
4. Copper plating 0.008mm.

Characteristics

· Good load capacity & wear-resistant
· Suitable for linear, oscillating and rotating movements
· Optimum performance under relatively high loads and low speeds
· Lead free bushing can meet environment protection requirement

Availability

Standard cylindrical DX bushing, DX thrust washers and DX strips are availabe

Special designs are produced at short time

flanged bushings Thermoplastic plain bearing POM Bushes Cylindrical standard dimensions Rolled dry sliding bearings Gerollte Trockengleitlager Flanged sliding bearings, standard dimensions POM Bushes

Typical Applications

Self lubricating bearing is widely used in the machine that Lead free is unacceptable, such as textile machines, auto operating parts,auto chassis, forging machine, metallurgical and so on.

Office Equipment:Such as printer bushing,Photocopier shredder bushing,air compressor bushing etc.
Household Applications:such as refrigerator bushing,washing machine bushing,air conditioner bushing,Fan bushing.tv bushing etc.
Self Lube Bearings Product Category SF-2 Boundary Lubricating Bearing

1. POM thickness 0.30~0.50 mm. It provides high wearresistance and low friction even with only minute volume oflubricant are supplied, this bearing surface carries a pattern of circular indents which should be filled with grease on assembly of the bearing.
2. Sintered bronze powder thickness 0.20-0.35mm. A special composition of powdered copper is thermally fused to the steel backing. This contact layer acts as an anchor for the PTFE layer and conducts the thermal build up away from the bearing surfaces.
3. Low-carbon steel.Setting the foundation of the bushings, the steel back provides exceptional stability,load carrying and heat dissipation characteristics.

Bearing forms available in standard dimensions
· Cylindrical bushes
· Thrust washers
· Sliding plates