480×400mm 4" CL150 Oil Blender Power Plant Accessories

Product Specification

Thousand-party Light Oil Storage Tank Rotary Ejector (Spin Type) Φ480×400mm ASME B16.5 4"/6" CL150

Function summary:

Rotary ejector (spin type) is to fully mix various storage tank media in a short period of time without changing the tank structure and production process to achieve the effect of homogeneity, uniform heat, and prevent oil media from settling.

Effectively mix, homogenize and homogenize oil media of different batches and textures, that is, stir the oil media in all directions and at the same time fully blend the media to improve the quality of deep processing in the refining process. There is no need to stop production or labor. When working, the rotary ejector automatically cleans the oil sludge accumulation in the oil storage tank, and ultimately reduces the oil sludge accumulation by 80%, expands the utilization rate of the oil tank, and reduces the time for cleaning the oil sludge and reduces the cleaning of the oil tank. Workload. From the benefit point of view, it can save 80% of the sludge cleaning fee. From the time point of view, the sludge cleaning time is reduced from 40 days to 10 days, which improves the utilization rate of oil tanks.

working principle:

The rotary ejector (spin type) itself has no power. It uses the pipeline to connect with the external circulating pump, and the medium in the tank is extracted by the pump, which is circulated through the pump to the pipeline and sprayed out through the nozzle of the rotary ejector. The existing circulating pump of the storage tank is used as the power source.

Structure: Eccentric nozzle installation, sliding bearing.

Dimensions: Φ480×400mm (rotating diameter×height)

Interface flange: HG20592 DN100/DN150 PN16, HG20615 DN100/DN150 CL150

Structural principle: This equipment uses the nozzle eccentric installation, the reaction force generated by the fluid medium sprayed at the nozzle mouth as a torque to drive the entire nozzle and the rotating body to rotate at a uniform speed, and the liquid medium fully mixes the tank medium under the action of rotation and direct injection.

work process :

Start the circulating pump, the medium in the tank is pumped by the pump, and it is circulated to the pipeline through the pump and sprayed into the storage tank through the nozzle of the rotary jet. The rotary jet agitator (spin type) collects part of the energy in the movement of the fluid medium, and converts it into the rotating mechanical energy of the entire nozzle, so that the fluid medium is sprayed in all directions and returned to the storage tank with the effect of vortex.

Models and features

HRD15T-CS

Principle: The nozzle is installed eccentrically, and the reaction force generated by the fluid medium spraying at the nozzle port is used as a torque to drive the entire nozzle and the rotating body to operate at a uniform speed.

Product advantages: low production costs, sliding bearings work smoothly, reliably, and without noise. The medium itself is used for lubrication, and the sliding surface is separated by the lubricating medium without direct contact, which greatly reduces friction loss and surface wear.

Scope of application: Qianfang class light oil storage tank.

Rotary ejector (spin type) is a non-standard equipment, which will perform one-to-one calculation, design and production for the technical parameters of each storage tank.

Specific data is adjusted according to user parameters

Security

The rotary ejector is composed of two parts: the main body of the equipment and the main body of the rotary. The joint part is equipped with an electrostatic conduction device, which is connected to the storage tank with electrostatic grounding to ensure the safety of the equipment.

Installation diagram

As shown below: