55 Inch Double Gimbal Type Pipe Expansion Joint / Pipework Bellows Carbon Steel

Product Specification

55 inch double gimbal pipe expansion joint for a reactor overhead line

Product description

The gimbal expansion joint is basically the same as the hinge type, except that instead of being limited to deflection in only one plane, it can accept bending or angulation in any plane. It contains two sets of hinge pins or pivots, the axis of each set perpendicular to the other. Each set of pins is connected to each other with a central gimbal ring, in much the same way that a universal joint on an automobile works.

The gimbal pipe expansion joint is basically the same as the hinge type, except that instead of being limited to deflection in only one plane, it can accept bending or angulation in any plane. It contains two sets of hinge pins or pivots, the axis of each set perpendicular to the other. Each set of pins is connected to each other with a central gimbal ring, in much the same way that a universal joint on an automobile works. This unit provides the same type of restraint and resistance to axial forces, such as the pressure thrust, and to shear forces as the hinge type.

Installation

• Inspect for damage during shipment, i.e., dents, broken hardware, water marks on carton, etc.
• Store in clean dry area where it will not be exposed to heavy traffic or damaging environment.
• Use only designated lifting lugs.
• Make the piping systems fit the expansion joint. By stretching, compressing, or offsetting the joint to fit the piping, the joint may be over stressed when the system is in service.
• It is good practice to leave one flange loose until the expansion joint has been fitted into position. Make necessary adjustment of loose flange before welding.
• Install joint with arrow pointing in the direction of flow.
• Install single Van stone liners, pointing in the direction of flow. Be sure to install a gasket between the mating flange and liner.
• With telescoping Van stone liners, install the smallest I.D. liner pointing in the direction of flow.
• Remove all shipping devices after the installation is complete and before any pressure test of the fully installed system.
• Remove any foreign material that may have become lodged between the convolutions.
• Refer to EJMA Standards for proper guide spacing and anchor recommendations.

FAQ

Q: What do you need to know for fast quotation?

A: It would be highly appreciated if we have the details of detailed drawing for OEM order, model, end connection type, flange standard and material, medium, pressure, temperature and other working conditions.

Q: Can you make the product as per client's requirement?

A: Yes, OEM service available. We can make according to your drawings or samples.

Q: How can you guarantee the quality or any warranty?

A: Any quality problems during use, all the products can be returned for domestic clients; we will send more free product in next batch for overseas clients or according to the requests.

Q: Do you accept small quantity order?

A: Yes, MOQ 1 pc for standard size, 5 pcs for customized size.

Q: What is your payment terms?

A: Usually T/T(30% as deposit, the rest 70% will be paid before delivery). L/C, Western Union, Paypal also acceptable.

Q: What about the lead time?

A: Usually 3-10 days for sample order. Lot production time according to order quantity.

Q: Can you offer the drawing?

A: Yes, we have an excellent engineer team who offer you professional drawing and technical support.

Q: Can you offer the rubber joint sample?

A: For standard type of rubber joint we can offer the sample, but the customer will afford the freight. For non-standard rubber joint or large quantity, we will charge for the sample.