Corrugated Pipe Expansion Joint Compensator Non Thrust Sleeve Sleeve Type DN250

Product Specification

Corrugated pipe compensator non-thrust sleeve sleeve type expansion joint DN250

General descrition

Sleeve compensator is a compensation device for the thermal fluid pipeline. It is mainly used for the axial thermal expansion displacement absorption compensation after the auxiliary of the straight line pipeline. It is a compensator installed directly in any pipeline conveying unidirectional or multidirectional fluid without corrosion. There are mainly sleeve (core tube), shell, sealing materials and other components.

Working principle

The expansion joint of the non-thrust sleeve is a dense ring steam chamber, which is cleverly used in the design structure by using PASCAL's theory in fluid mechanics. This chamber has two ring pressure surfaces, one is the fixed end face of the chamber, the other is the ring surface of the telescopic pipe shoulder sealed in the chamber, and the telescopic pipe is movable.The area of the movable annular compression surface is exactly equal to the cross-sectional area of the telescopic tube. When the compensator works, under the action of the medium pressure, the pressure on the annular surface and the cross-sectional area of the telescopic tube are equal, but in opposite directions, so the two pressures cancel each other out.In this way, only the friction force of the compensator to compress the packing is considered in the design of the support, and in the calculation of the thrust of the fixed support, the thrust caused by the pressure of the working medium is no longer calculated.Therefore, the fixed support is a load-reducing support, which can save a lot of support materials, and also save manpower and financial resources.

Main technical parameters and schematic diagram

(1) nominal diameter of pipeline :DN25 -- 1000mm

(2) applicable nominal pressure range :PN≤2.5MPa

(3) applicable working temperature :t≤350℃

(4) scale

(5) selection of expansion joint

When selecting the compensator, the nominal diameter DN shall prevail. The outer diameter of the designed pipeline shall be the same as the inner and outer diameters in the parameter list, with the allowable error ≤3mm.

The model of the selector compensator should be indicated in the following example.

Note: material code: bx represents all stainless steel 1Cr18N19Ti, T represents carbon steel q235-a, BXB represents semi-stainless steel (expansion tube 1Crl8N19Ti)

Parameters of no thrust expansion joint in ZTWB oil-injected dc medium

Shipping Details:

FAQ

Q : Are you trading company or manufacturer?

A: We are manufacturer of lift check valve, expansion joint,rubber joint, bellow, dismantling joint, dresser coupling, flange adapter and flange with more than 12-year experience.

Q: Do you have products catalog?
A: Yes, we have. Please tell me your email or instant messager, we will send our catalog.

Q: Can you provide drawings and technical data?
A: Yes, our professional technical department will design and provide drawings and techical data.

Q: Do you provide samples? Is it free or charged?
A: Yes, we can offer sample free but shipping charges covered by customer.

Q: Have your products been exported?
A: Yes, they have been exported to USA, Canada, Australia, Russia, Chile, Panama, Nicaragua, UAE, Saudi Arabia, Egypt, Sri Lanka, Nigeria, Iran,Vietnam, Indonisia, Singapore, Greece, Netherland, Georgia, Romania, Ireland, India, Thailand, Pakistan, Philippines

Q: Can the products be manufactuered by customer's requirement?
A: Yes, the specifications stated above are the standard ones, we can design and manufacture as requirement.