TYSIM PILING EQUIPMENT CO., LTD
| Payment Terms | D/A, L/C, T/T |
| Supply Ability | 10 sets/month |
| Delivery Time | 30-45 days |
| Packaging Details | Nude Packing |
| Product Name | Casing rotator |
| Diameter of Drill hole | 800-1500mm |
| Rotary Torque | 1500/975/600 kN.m |
| Rotary Speed | 1.6/2.46/4.0 rpm |
| Lower Pressure of Sleeve | Max. 360 kN + Dead weight 210 kN |
| Pulling Force of Sleeve | 2444kN, Instantaneous 2690 kN |
| Pressure- Pulling Stroke | 750 mm |
| Weight of Casing Rotator | 32 ton |
| Engine Model | ISUZU AA-6HK1XQP |
| Engine Power | 183.9/2000 kw/rpm |
| Fuel Consumption of Engine | 226.6 g/kwh |
| Control Mode | Wired remote control |
| Weight of Power Pack | 7 ton |
| Brand Name | TYSIM |
| Model Number | KTR1505L |
| Certification | ISO9001:2008 |
| Place of Origin | Jiangsu, China |
View Detail Information
Explore similar products
Super Large Hydraulic Material Handler / Mining Hydraulic Excavator
High Power Vibration Hydraulic Piling Rig Without DTH Hammer
TYSIM 42 Ton WZY42-5A Crawler Hydaulic Material Handling Machines
TYSIM 20 Ton Diesel Large Material Handler Excavator WZY 20-6
Product Specification
| Payment Terms | D/A, L/C, T/T | Supply Ability | 10 sets/month |
| Delivery Time | 30-45 days | Packaging Details | Nude Packing |
| Product Name | Casing rotator | Diameter of Drill hole | 800-1500mm |
| Rotary Torque | 1500/975/600 kN.m | Rotary Speed | 1.6/2.46/4.0 rpm |
| Lower Pressure of Sleeve | Max. 360 kN + Dead weight 210 kN | Pulling Force of Sleeve | 2444kN, Instantaneous 2690 kN |
| Pressure- Pulling Stroke | 750 mm | Weight of Casing Rotator | 32 ton |
| Engine Model | ISUZU AA-6HK1XQP | Engine Power | 183.9/2000 kw/rpm |
| Fuel Consumption of Engine | 226.6 g/kwh | Control Mode | Wired remote control |
| Weight of Power Pack | 7 ton | Brand Name | TYSIM |
| Model Number | KTR1505L | Certification | ISO9001:2008 |
| Place of Origin | Jiangsu, China | ||
| High Light | ISO9001 Casing rotator ，Wired remote control Casing rotator ，KTR1505L Casing rotator | ||
Casing Rotator KTR1505L and Hydraulic Power Pack
About Hydraulic Power Pack
We have the emergency system, the main function of control system is also set in the power pack, when there is one malfunction, the emergency system can be adopted to complete the construction work.
We have the cutter head load auomatic control system, when cutting the hard rock, it can well protect the cutter head and effctively enhance the cutting efficiency by the automatic control computer.
Also we have the convenient operating system, according to the working condition the operating system platform of micro computer can keep the machine at an optimum working state by adjusting the speed, torque and pressing force, and promote the work efficiency to the maximum.
1. Specifications
| Technical parameters | |
| Drilling Diameter | 800-1500 mm |
| Torque | 1550/975/600 kN.m |
| Rotary speed | 1.6/2.46/4.0 |
| Lower Pressure of sleeve | Max. 360kN+Dead Weight 210 kN |
| Pulling fore of sleeve | 2444kN, Instantaneous 2690 kN |
| Pressure pulling stroke | 750 mm |
| Weight | 32 ton |
| Parameters of Hydraulic power station | |
| Engine Model | ISUZU AA-6HK1XQP |
| Engine Power | 183.9/2000 kw/rpm |
| Fuel Consumption of Engine | 226.6 g/kwh( Max. power rate) |
| Weight | 7 ton |
| Control Mode | Wired remote control |
2. Description
Use for different types construction:
(1) Foundation pile, continuous wall
Foundation piles for high-speed rail, road and bridge and house building;
Articulation pile constructions which are required to be excavated, such as subway platforms, underground architectures, continuous walls.
Water retaining wall of reservoir reinforcement.
(2)Drilling gravels, boulders and karst caves
It is allowable to conduct the foundation pile construction at mountain lands with gravel and boulder formations.
It is allowable to conduct operation and cast the foundation piles at the thick quicksand formation and necking down stratum or the filling layer.
Conduct rock-socketed drilling to the rock stratum, cast the foundation pile.
(3) Clear the underground obstructions
During the urban construction and bridge rebuilding, the obstructions such as the steel reinforced concrete pile, steel pipe pile, H steel pile, pc pile and wood pile can be cleared directly, and cast the foundation pile on the spot.
(4) Cut the rock stratum
Conduct the rock-socketed drilling to the cast-in-place piles.
Drill through-holes on the rock bed(shafts and ventilation holes).
(5) Deep excavation
Conduct the in-place casting or steel pipe pile inserting for the deep foundation improvement.
Excavate deep wells for construction use in the constructions of reservoir and tunnel.
3.Competitive Advantage
(1) No noise, no vibration, and high safety.
(2) Without mud, clean working surface, good environmental friendliness, avoiding the possibility for mud to enter the concrete, high pile quality, enhancing the bond stress of concrete to the steel bar;
(3) During construction drilling, the characteristics of stratum and rock can be directly distinguished;
(4) The drilling speed is fast and reaches about 14m/h for the general soil layer;
(5) The drilling depth is large and reaches about 80m according to the situation of soil layer;
(6) The hole forming verticality is easy to master, which can be accurate to 1/500;
(7) No hole collapse will be caused, and the hole forming quality is high;
(8) The hole forming diameter is standard, with little filling factor. Being compared with other hole forming methods, it can save a lot of concrete usage;
(9) The hole clearing is thorough and fast. The drilling mud at the hole bottom can be clear to about 3.0cm.
FAQ
Q1: What's your service ?
We can offer professional technical support and good after-sale service to you.
Modification methods will be different according to different models and configurations of your owned excavators.
Before modifying, you need to provide configuration, mechanical and hydraulic joints and others.
Before modifying, you need to confirm technical specification.
Q2:Why Choose Us?
1. We are the professional & trustworthy manufacturer of piling machinery in China, best quality & best service.
2. Supply professional customized service to meet all your requirements.
3. Our rotary drilling rigs have been sold to more than 20 countries, such as Russia, Australia, Thailand, Zambia and others.
4. Competitive price.
How to Contact Us?
Send your Inquiry Details in the Below, Click "Send" Now!
Company Details
Business Type:
Manufacturer,Exporter,Trading Company,Seller
Year Established:
2012
Total Annual:
3000000-5000000
Employee Number:
200~300
Ecer Certification：
Verified Supplier
TYSIM PILING EQUIPMENT CO., LTD is a leading enterprise specialized in the R&D and manufacturing of small and medium sized compact rotary drilling rigs. TYSIM is also a member of the management committee of the Association of the National Foundation Industry within the Association of the Nationa... TYSIM PILING EQUIPMENT CO., LTD is a leading enterprise specialized in the R&D and manufacturing of small and medium sized compact rotary drilling rigs. TYSIM is also a member of the management committee of the Association of the National Foundation Industry within the Association of the Nationa...
Get in touch with us
Leave a Message, we will call you back quickly!