Φ100mm 0.5mm Single Crystal Quartz Wafer X-cut Y-cut for Pressure Sensor

Product Specification

Φ100mm 0.5mm Thick Single Crystal Quartz Wafer X-cut Y-cut for Pressure Sensor

Quartz is a crystalline form of silicon dioxide (SiO2). It is a hard, brittle, transparent material with a density of 2649 kg/m3 and a melting point of 1750° C. Quartz is insoluble in ordinary acids, but soluble in hydrofluoric acid and in hot alkalis. When quartz is heated to 573° C, its crystalline form changes. The stable form above this transition temperature is known as high-quartz or beta-quartz, while the stable form below 573° C is known as low-quartz or alpha-quartz. For resonator applications, only alpha-quartz is of interest and unless stated otherwise the term quartz in the sequel always refers to alpha-quartz. Quartz is an abundant natural material, but considerable labor is required to separate good quality from poor-quality natural quartz. Although silicon (mainly in the form of dioxide, and generally as small quartz crystallites) comprises approximately one third of earth’s crust, natural quartz of size and quality suitable for use in devices employing its piezoelectric properties, has been found principally in Brazil.

FAQs:

1. Q: What are the products you mainly work on?

A: We look at ourselves as the piezo wafer specialist. We are the very first to work with Single Crystal Quartz in China about 30 years ago. Then gradually we step in the field of LiNbO3, LiTaO3, Quartz glass, LGS, CTGS etc. Especially, if you are looking for a piezo quartz supplier, we are the ultimate choice! We export millions of quartz blanks each year because we master the AT, SC and IT cuts with superior angle precision.

2. Q: Can you accept product customization?

A: Yes, of course. We can fabricate as per your request. In addition, we are so experienced with piezo wafers that we can provide you relevant suggestions if you are not 100% sure about your choice. Besides, we do have some standard wafers in stock, please check with us.

3. Q: Can you deliver the goods via our courier agent?

A: Yes, we would suggest you go with the courier agent you are most familiar with (DHL, FedEX, UPS etc.). We can ship via your account. And, of course, we will pack the products safely in acceptable size to help you save the shipping cost. If you need us to take care of the freight, it’s also not a problem. We also have good discount with the international courier companies.

4. Q: How can you guarantee we get what we want safely?

A: The wafer products are fragile and sometimes expensive. The last thing, as the manufacturer, we want to see is the products we make were damaged during courier. As a result, we will pack the wafers adequately and put them in a proper carton filled with buffer sponge. However, accidents are inevitable sometimes. So, please follow the “Acceptance check” steps shown in the drawings below. If the unwanted happened, we will either give the replenishment or refund if you follow the checking steps.

5. Q: Can we visit your factory?

A: Sure. Factory inspection is important for large quantity purchase and long-term cooperation. Face to face discussion is what we mostly confident with. During the past years, big names around the world have witnessed our progress in factory build-up. These days, due to the Covid-19 pandemic, we also had the experience of videoconferencing with global buyers.

Acceptance Check

• The product is fragile. We have adequately packed it and labeled it fragile. We deliver through excellent domestic and international express companies to ensure transportation quality.

• After receiving the goods, please handle with care and check whether the outer carton is in good condition. Carefully open the outer carton and check whether the packing boxes are in alignment. Take a picture before you take them out.

​

• Please open the vacuum package in a clean room when the products are to be applied.

• If the products are found damaged during courier, please take a picture or record a video immediately. DO NOT take the damaged products out of the packaging box! Contact us immediately and we will solve the problem well.