220V Amperometric Chlorine Dioxide Water Quality Transmitter Drinking Water 800g

Product Specification

220V Amperometric Chlorine Dioxide Transmitter For Drinking Water 800g

Introduction 

A large number of experimental studies have shown that chlorine dioxide is a safe and non-toxic disinfectant with no "three-causing" effects (carcinogenic, teratogenic, and mutagenic). At the same time, it does not react with organic substances during the disinfection process.

The ADS2-U3A-CD10 chlorine dioxide analyzer water quality transmitter is a single parameter analyzer,specially used in the disinfection industry. Each chlorine dioxide instrument is connected to DRFN's chlorine dioxide sensors to realize the measurement of chlorine dioxide disinfectants.

Advantages Of Chlorine Dioxide Transmitter

1. The protection grade of the chlorine dioxide controller shell is IP66, which can effectively isolate the pollution and corrosive gas intrusion from the external environment.

2. All the configuration entered by the user is kept indefinitely, even if there is no power, the data will not be lost.

3. 128*64 black and white graphic dot matrix screen, and the display backlight provides always on and energy-saving mode selection.

4.  It has time and historical data recording functions to meet higher data management requirements.

5. The user can use the operation panel on the front of the controller to calibrate the sensor and set various parameters that need to be output.

6. Two settable 0/4~20mA active current loop outputs, and each current output allows the user to specify what measurement value it represents. 

7. The controller has two settable SPST relays. The setting objects include alarms for the high and low values of the measurement parameters, the control of the cleaning cycle of the sensor. The warning of the working environment temperature of the instrument.

Applications Of Chlorine Dioxide Transmitter

Online analysis of chlorine dioxide in municipal tap water, drinking water, food, beverages, and other water sources and water supply pipe networks;

Online analysis of circulating cooling water and swimming pool water, as well as sewage and wastewater disinfection and chemical addition control.

Parameters Of Chlorine Dioxide Transmitter

• Model: CD10
• pH range: 1~12
• Pressure range: 0~1 bar
• Temperature range: 0~50℃
• Response time: T₉₀ about 60 s
• Integrated automatic temperature compensation
• Flow rate: about 30 l/h, low flow-dependence
• Shaft length: standard 175 mm, and up to 220 mm in length (mA-Version)
• Connection: 2-pole terminal, M12 male
• Material: PVC-U, semipermeable membrane