BlueUnite App Portable PH ORP Meter Android Devices

Product Specification

BlueUnite App Portable PH ORP Meter Multifunctional Analyzer Introduction

The i-Blueunite APP is a set of quick, easy and effective testing equipment and data management tool.

DRFN i-BlueUnite APP is a mobile application that can be used on Android devices. i-BlueUnite can be used for all Daruifuno sensors. It can be connected to mobile devices with i-BlueUnite App via a Bluetooth adapter to configure and calibrate the sensor and view real-time readings to form historical data. The App enables you to filter and classify data by date, location, and detection type. The user can share the data via email.

Connect the mobile phone or tablet PC with the i-BlueUnite APP and the i-BlueUnite Bluetooth adapter wirelessly. The i-BlueUnite APP can identify the sensor connected to the adapter. The sensor can be single parameter or multi-parameter.

Product Features

Real-time Measurement

Click "START", the APP can use the sensor to measure the real-time data. After waiting for the data to stabilize, click "STOP" to read the data.

The reading can be saved at any time. Tap "SAVE", the data will be automatically saved to the historical data for future management. You can also use your phone to take a screenshot of the measurement interface and save it.

Location Information

When creating a "Location" information, users can customize the location name, remark what needs to be measured, specify the valid range of the location, and add a photo of the location with the built-in camera of the mobile device.

For the location that you need to detect frequently, the APP will recommend users to create a "Location" information to manage it. But the measurement data without creating a “location”information will be saved in the “Temporary Location”.

After all the location information are added, the APP will automatically generate a QR code image, which can be saved to the album of the mobile device, and the user can share it with others, so that different users can use different mobile devices to carry out the same, continuous measurement, even if other users have never been to the corresponding location, the GPS information in the location image can help the user navigate to the specified location.

At the same time, the corresponding GPS tag will be recorded synchronously, the GPS information can determine whether the user is within the specified valid range. If not, the APP will remind the user that you are out of range, and the detected data will be labeled as "invalid" when it is saved. Users can use GPS navigation to correct their position after receiving the reminder.

When creating "location" information outdoors, users can go to the certain geographic location to create it, or select a point on the map embedded in the APP to create it directly.

Indoors, the innovative approach of the BlueUnite APP can also create location information for laboratories and factories where containers are densely placed. Users can create a new piece of location information for each container, print and paste the QR code on the container, and use the APP to scan and identify before each measurement. The advantage of this is that it avoids that the data is registered in the wrong table during manual inspection; in addition, even if the containers are placed in the wrong place or the position is exchanged, the APP can also recognize and classified the data to the correct position.

Sensor-setting

DRFN i-BlueUnite APP can set all the sensors registered by DRFN, whether they are used to measure chemical, physical or biological information.

DRFN i-BlueUnite APP can handle the problem of sensor setting very professionally. According to the different sensors detected, the APP provides different setting schemes to realize the detailed calibration of each sensor. The sensor that has been successfully set by the APP can be directly linked to the system to start real-time measurement.

In many industries, using the BlueUnite Bluetooth adapter can make the user feel more portable.

History Data

DRFN i-BlueUnite APP classifies and saves the data, so that the user can filter the data by measurement date, location, and detection type.

The APP can generate log files directly, and you can send it to the user's designated mailbox by email. Users can open the data files in Excel.